Influence and comparison of emerging techniques of yarn manufacturing on physical–mechanical properties of polyester-/cotton-blended yarns and their woven fabrics

Abstract

In this study, the physical–mechanical properties of ring spun, ring compact, rotor and air-vortex yarns were investigated. The study was carried with yarn having linear densities of 24.4 tex and 36.7 tex, which were then converted to woven fabrics. The ring spun yarns have higher values of strength but also with higher strength irregularities. Extra-ordinarily low hairiness was observed in air-vortex yarns due to its unique yarn formation technique. The deviation rate (DR) of yarns have correlation with the mass spectrogram of respective yarns obtained from USTER Tester 5. Rotor and air-vortex yarns exhibited higher coefficient of friction. The woven fabrics made from ring spun yarns exhibited higher tensile and tear strength with higher elongation at break. The fabrics made from air-vortex yarns have very good pilling grade due to less protruding fibres on their surface and good structural integrity.     

A revised viscoelastic micropolar nanofluid model with motile micro‐organisms and variable thermal conductivity

In the present study, a magnetized micropolar nanofluid and motile micro‐organism with variable thermal conductivity over a moving surface have been discussed. The mathematical modeling has been formulated using a second‐grade fluid model and a revised form of the micropolar fluid model. The governing fluid contains micro‐organisms and nanoparticles. The resulting nonlinear mathematical differential equations have been solved with the help of the homotopy analysis method. The graphical and physical features of buoyancy force, micro‐organisms, magnetic field, microrotation, and variable thermal conductivity have been discussed in detail. The numerical results for Nusselt number, motile density number, and Sherwood number are presented with the help of tables. According to the graphical effects, it is noted that the buoyancy ratio and the bioconvection parameter resist the fluid motion. An enhancement in the temperature profile is observed due to the increment in thermal conductivity. Peclet number tends to diminish the motile density profile; however, the viscoelastic parameter magnifies the motile density profile.     

Biohydrogen production from Imperata cylindrica bio-oil using non-stoichiometric and thermodynamic model

This paper presents a non-stoichiometric and thermodynamic model for steam reforming of Imperata cylindrica bio-oil for biohydrogen production. Thermodynamic analyses of major bio-oil components such as formic acid, propanoic acid, oleic acid, hexadecanoic acid and octanol produced from fast pyrolysis of I. cylindrica was examined. Sensitivity analyses of the operating conditions; temperature (100–1000 °C), pressure (1–10 atm) and steam to fuel ratio (1–10) were determined. The results showed an increase in biohydrogen yield with increasing temperature although the effect of pressure was negligible. Furthermore, increase in steam to fuel ratio favoured biohydrogen production. Maximum yield of 60 ± 10% at 500–810 °C temperature range and steam to fuel ratio 5–9 was obtained for formic acid, propanoic acid and octanol. The heavier components hexadecanoic and oleic acid maximum hydrogen yield are 40% (740 °C and S/F = 9) and 43% (810 °C and S/F = 8) respectively. However, the effect of pressure on biohydrogen yield at the selected reforming temperatures was negligible. Overall, the results of the study demonstrate that the non-stoichiometry and thermodynamic model can successfully predict biohydrogen yield as well as the composition of gas mixtures from the gasification and steam reforming of bio-oil from biomass resources. This will serve as a useful guide for further experimental works and process development.     

Synthesis,characterization and visible-light-driven photoelectrochemical hydrogen evolution reaction of carbazole-containing conjugated polymers

Hydrogen (H₂) is one of the most important fuel candidates and its low-cost production would necessitate the development of efficient electrocatalysts. In this study, we report the synthesis and evaluation of two new carbazole-containing polymers as organic photoelectrochemical (PEC) catalysts for hydrogen evolution reaction (HER). The synthesis of these new conjugated polymers, poly(N-(2-ethylhexyl)-3,6-carbazole-p-bisdodecyloxy-phenylene vinylene) (P1) and poly(N-(2-ethylhexyl)-3,6-carbazole-p-bis(2-ethylhexyloxy)-phenylene vinylene) (P2), was accomplished by the Horner–Emmons polymerization reaction and subsequently characterized by ¹H NMR, FTIR, diffuse reflectance UV–vis spectroscopy (DR UV–vis), scanning electron microscope (SEM) and thermogravimetric analysis (TGA). The optical band gaps of P1 and P2, derived from the onset absorption edge, were found to be 2.10 and 2.14 eV, respectively. The chronoamperometric (CA) measurements revealed that the photo-current density generated at ～0 V by P1 and P2, without the use of additional noble metal based cocatalysts or sacrificial electron donors, was ?1.8 and ?2.1 μA/cm², respectively. The enhanced PEC performance of P2 was attributed due to its narrow band gap that enhanced light harvesting ability and the larger surface area which helped in minimizing charge recombination. The experimental observations were well supported by the drastic quenching of PL emission intensity of P2. The linear sweep voltammetry (LSV) measurements showed the onset potential at around ?0.3 V for both polymers. The photocurrent density difference for P2 at ?1.2 V reached to maximum value of 0.37 mA/cm², amounting to ～25% current enhancement under illumination. Long-term stability testing via CA measurements revealed that P2 was relatively more stable than P1, which warranted its potential as photocatalyst for solar water splitting. In addition, P1 and P2 are readily soluble in common organic solvents which make them potential candidates for photovoltaic devices application.     

Effect of preparation methods on the catalyst performance of Co/MgLa mixed oxide catalyst for COx-free hydrogen production by ammonia decomposition

This work deals with the effect of catalyst preparation method of the mixed Co, Mg and La oxide catalysts on their structure and catalytic properties for ammonia decomposition. Two methods are used for catalysts preparations impregnation and co-precipitation (in air and in pure O₂ atmosphere), The Mg/La = 2 molar ratio and 5 wt% of cobalt content was maintained same in all catalysts. The catalyst performance was evaluated in the temperature range 300–550 °C at atmospheric pressure. The prepared catalysts were characterized by BET, XRD, TPR, XPS, CO₂-TPD and SEM techniques. No pronounced differences were observed in BET among the catalysts. It was found that the 5CML-OXY (5 wt%Co over MgLa catalyst prepared by co-precipitation method in oxygen atmosphere) has superior activity among the other catalysts. This could be attributed to availability of easily reducible cobalt species determined by TPR studies and enhanced interaction between Mg and La determined by SEM and XPS. The moderate basic site density determined by CO₂-TPD results was also increased in 5CML–OXY catalysts compared with other catalysts. These consequences are might be one of the reasons for enhanced activity of 5CML–OXY catalyst compared to other catalysts. Hence catalyst preparation by co-precipitation in oxygen atmosphere is the best method which might be one of the parameters that influenced on catalytic properties of the cobalt on MgOLa₂O₃ system, for ammonia decomposition.     

Modelling of simultaneous methanogenesis and denitrification in an upflow packed-bed biofilm reactor

The performance of an upflow packed-bed biofilm reactor was investigated by considering simultaneous methanogenesis and denitrification reactions under step and sinusoidal variations of feed concentration and temperature. For simultaneous step inputs of 20 mg dm⁻³ of NO₃⁻—N and 60 mg dm⁻³ of methanol, the proposed model shows that major conversion of both the substrates takes place in the first half of the reactor. However, when the inlet concentration of methanol is subjected to sinusoidal variation, while that of NO₃⁻—N is maintained stepwise, the exit concentration of both methanol and NO₃⁻—N follow a sinusoidal response. On the other hand, when the inputs are reversed (methanol stepwise and NO₃⁻—N sinusoidal), the response exhibits similar behaviour. For sinusoidal variation of feed temperature the exit concentration profiles of both substrates also follow a sinusoidal pattern. For methanol, the mean steady state conversion under sinusoidal variation is higher than the corresponding steady state concentration when feed temperature is constant at 30°C. The model predictions are in good agreement with the experimental data available in the literature. ©1997 SCI