Apodized chirped fiber Bragg grating for postdispersion compensation in wavelength division multiplexing optical networks

In this paper, a postdispersion compensation unit is proposed leading to a better performance for the optical communication systems. This unit utilizes a chirped fiber Bragg grating (CFBG). For enhanced performance of the CFBG, a proper apodization function is chosen to improve the quality factor (Q‐factor) and the bit error rate (BER) of the system. A 110‐km wavelength division multiplexing (WDM) optical link is investigated. The system performance is evaluated through its Q‐factor, eye diagram, and BER showing best performance when using the Hamming apodization function.     

A Practical Space-Code Correlator Receiver for DSP Based Software Radio Implementation in CDMA2000

Development of practical algorithms for beamforming in 3G CDMA systems and their software radio implementations are still a challenging task, which will facilitate upgrading of traditional base stations into smart antenna capable 3G base stations. In this paper, we propose a practical space-code correlator (SCC) receiver structure for its software radio implementation a DSP. SCC’s advantage comes from the fact that it doesn’t require any training sequence or learning parameter as in other algorithms (LMS or CM). DSP implementations of the SCC are performed using Texas Instruments C67xx family platforms. In the simulations, reverse link base band signal format of CDMA2000 is used and the effects of different array topologies (uniform linear array-ULA or uniform circular array-UCA) are considered. The implementation results regarding beamforming accuracy, weight vector computation time (execution time), search resolution effect on DOA estimation accuracy, DSP resource utilization, and received SINR are presented. The results show that DSP based SCC beamformer can estimate weight vectors within less than 10 ms with DOA search resolution of 2° especially when C6713 DSP is used. With faster DSPs and larger search resolutions, execution time could be significantly reduced as well. It provides comparable SINR performance with LMS and CM algorithms.

Highly Efficient,Solution‐Processed,Single‐Layer,Electrophosphorescent Diodes and the Effect of Molecular Dipole Moment

A new family of highly soluble electrophosphorescent dopants based on a series of tris‐cyclometalated iridium(III) complexes (1–4) of 2‐(carbazol‐3‐yl)‐4/5‐R‐pyridine ligands with varying molecular dipole strengths have been synthesized. Highly efficient, solution‐processed, single‐layer, electrophosphorescent diodes utilizing these complexes have been prepared and characterized. The high triplet energy poly(9‐vinylcarbazole) PVK is used as a host polymer doped with 2‐(4‐biphenylyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole (PBD) for electron transport. Devices with a current efficiency of 40 cd A^?1 corresponding to an EQE of 12% can thus be achieved. The effect of the type and position of the substituent (electron‐withdrawing group (CF₃) and electron‐donating group (OMe)) on the molecular dipole moment of the complexes has been investigated. A correlation between the absorption strength of the singlet metal‐to‐ligand charge‐transfer (¹MLCT) transition and the luminance spectral red shift as a function of solvent polarity is observed. The strength of the transition dipole moments for complexes 1–4 has also been obtained from TD‐DFT computations, and is found to be consistent with the observed molecular dipole moments of these complexes. The relatively long lifetime of the excitons of the phosphorescence (microseconds) compared to the charge‐carrier scattering time (less than nanoseconds), allows the transition dipole moment to be considered as a “quasi permanent dipole”. Therefore, the carrier mobility is sufficiently affected by the long‐lived transition dipole moments of the phosphorescent molecules, which are randomly oriented in the medium. The dopant dipoles cause positional and energetic disorder because of the locally modified polarization energy. Furthermore, the electron‐withdrawing group CF₃ induces strong carrier dispersion that enhances the electron mobility. Therefore, the strong transition dipole moment in complexes 3 and 4 perturbs both electron and hole mobilities, yielding a reduction in exciton formation and an increase in the device dark current, thereby decreasing the device efficiency.     

Collision avoidance slot allocation scheme for multi-cluster wireless sensor networks

This paper introduces a collision avoidance slot allocation scheme for Time Division Multiple Access (TDMA) based Medium Access Control (MAC) in multi-cluster wireless sensor networks. TDMA MAC protocols have built-in active-sleep duty cycle that can be leveraged for limiting idle listening. Also, they can overcome the overhearing problem, thus have better energy efficiency. Enabling concurrent intra-cluster communications using a single radio channel is a key issue in TDMA MAC protocols. Using orthogonal frequency channels or different Code Division Multiple Access codes for different adjacent clusters can solve the problem at the expense of cost. In this paper, we propose a new distributed slot allocation protocol called  Coordinated   Time   Slot   Allocation (CTSA) that can reduce collisions significantly using a single radio channel. We use simulations to study the effects of different system parameters on the performance of our proposed protocol. Simulation results show that applying CTSA over clustering protocols can significantly reduce collisions. It also shows fast convergence for our proposed CTSA protocol. In this paper we apply our CTSA scheme to the Low Energy Adaptive Clustering Hierarchy protocol which forms the basis for many cluster based routing protocols. CTSA is also compared with the SRSA algorithm proposed by Wu and Biswas (Wirel Netw 13(5):691–703, 2007) by means of simulation.     

Spectral efficiency (SE) enhancement of NOMA system through iterative power assignment

Wireless Networks - This paper studies enhancing non-orthogonal multiple access (NOMA) spectral efficiency (SE) through optimizing the assigned power to each NOMA user depending on their channel...     

A hybrid CDAC-threshold configuring SAR ADC in 28nm FDSOI CMOS

In this paper, a 9-bit 1.3 GS/s single channel SAR ADC is presented. In conventional SAR ADCs, the capacitive DAC size grows exponentially with respect to converter resolution. This results in both signal bandwidth and conversion speed reduction. The proposed architecture implements binary search through a redundant capacitive DAC for the 5 first MSBs and through programmable comparator thresholds for the remaining 4 LSBs. The DAC capacitance at the front-end remains small enough to achieve high sampling rate with increased input bandwidth. Two asynchronously clocked alternate comparators are used additionally to improve conversion speed. The ADC is designed and simulated in 28 nm FD-SOI CMOS. It consumes 4.1 mW from a 1 V supply, while achieving a SNDR of 52.1 dB and a Figure-of-Merit of 11.4 fJ/conversion-step.     

Performance Evaluation of Sleep Mode on Power Saving in WiMAX IEEE 802.16m and LTE DRX

Power saving represents a vital role in mobile communications networks such as IEEE 802.16m and LTE. Modern user equipment (UE_s) require high data rates and low power consumption. It is found that arranging sleep mode mechanisms ensures UE battery longer lifetime. In this paper, different sleep mode mechanisms are investigated for both IEEE 802.16m and LTE networks. The analyses are based on Markov and Semi-Markov chains. It is focused on the determination of UE transition state. Web traffic model parameters were considered in MATLAB simulation and a comparison assessment was conducted between WiMAX IEEE 802.16m and LTE DRX. It was found that LTE DRX sleep mode provides more power saving than WiMAX IEEE 802.16m sleep mode. The study is now implemented for 5G networks with encouraging results.     

Removal of nitrophenols from water using cellulose derived nitrogen doped graphitic carbon material containing titanium dioxide

Nitrophenols (NPs) and their derivatives are highly toxic, mutagenic and bio-refractory pollutants commonly present in natural water resources and industrial wastewater. To remove NPs from water, N-doped graphitic carbon (NGC) and NGC adsorbent containing titanium dioxide (NGC–TiO₂) were synthesized by pyrolysis of microcrystalline cellulose and dopamine mixture, and the mixture along with TiO₂ at 500°C, respectively. NCG-TiO₂ was thoroughly characterized using various analytical techniques. NP adsorption on the NGC–TiO₂ adsorbent surface was studied by varying the pH, initial concentration of NP, and adsorbent dose. The results showed that the most efficient adsorption was achieved at pH 3. After 4?h sonication at pH 3, 80% 4-NP adsorption was achieved using NGC–TiO₂ compared to 74% with NGC adsorbent. The percentage removal of 4-NP was higher than 3-NP which was also higher than 2,4-DNP using NGC–TiO₂. 4-NP adsorption best fitted to the Langmuir isotherm plot with R² value of 0.9981 and adsorption capacity of 52.91?mg?g^?1. The adsorption process of NP was found to follow a pseudo-second-order kinetic model. The rate constant value for the adsorption of 10^?4?M 4-NP at pH 3 using 10?mg of NGC–TiO₂ adsorbent was found to be 3.76?×?10^?5?g.mg^?1.min^?1     

Correction to: Enhanced critical current density of ex situ MgB2 via control of Mg assisted sintering

Journal of Materials Science: Materials in Electronics -