Utilization of waste marble dust as an additive in cement production

In this experimental study, the usability of waste marble dust (WMD) as an additive material in blended cement has been investigated. For this purpose, waste marble dust added cements (WMDCs) have been obtained by intergrinding WMD with Portland cement clinker at different blend ratios: 2.5%, 5.0%, 7.5% and 10% by weight. 40 × 40 × 160 mm mortar prisms have been produced with the obtained cements. Strength tests have been carried out on mortar specimen at 7, 28, and 90 days. WMDCs have been compared to each other as well as to control cements of CEM I and CEM II with respect to their physical, chemical and mechanical properties. Obtained results showed that WMDCs conform to EN 197-1 standard and thus 10% WMD can be used as an additive material in cement manufacturing.     

Comparison of antioxidant capacity and phenolic composition of peel and flesh of some apple varieties

BACKGROUND: Apples contain a large concentration of phenolic compounds, dependent on factors such as cultivar, harvest, storage conditions, and processing. This study aims to identify the essential phenolic compounds present in various apple varieties, to measure their total antioxidant capacity (TAC) with the CUPRAC (cupric ion reducing antioxidant capacity) and ABTS (2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonate)) methods, and to correlate their TAC values with HPLC findings. RESULTS: The order of TAC (mmol Trolox g^?1 fresh weight) of apple peels determined with the CUPRAC method was: Granny Smith > Amasya > Sky Spur > Ervin Spur > King Luscious ≥ Arap Kizi ≥ Lutz Golden. The theoretically calculated TAC values of HPLC‐quantified compounds, with the aid of the combined HPLC‐CUPRAC method, accounted for 18.4–33.5% of the experimentally observed CUPRAC capacity of peel extracts and 19.5–56.3% of flesh extracts, depending on apple variety. CONCLUSION: In synthetic samples of apple antioxidants, the CUPRAC‐TAC values of constituents, identified and analyzed by HPLC, proved to be additive, enabling measurement of the cooperative action of antioxidants using the proposed methodology. Apple peel showed higher contents of phenolics and therefore higher TAC than apple flesh, confirming the health benefit of the consumption of apples together with peel. © 2012 Society of Chemical Industry     

Effect of temperature on rheological characteristics of molasses: Modeling of apparent viscosity using Adaptive Neuro - Fuzzy Inference System (ANFIS)

In this study, the effect of temperature on the rheological characteristics of apricot and date molasses was studied separately. Rheological characteristics of both molasses were evaluated in the shear rate range of 0.1-100 s⁻¹ at different temperatures (10-40 °C). Power law model was used for the calculation of flow behavior index and consistency coefficients of molasses. Consistency coefficients of apricot and date molasses were in the range of 5.408-39.905 Pa sⁿ and 0.910-2.852 Pa sⁿ, respectively. Molasses samples showed a non-Newtonian flow behavior. The effect of temperature on apparent viscosity was described by Arrhenius equation and calculated activation energy at the shear rate of 54.2 s⁻¹ was 41.42 and 38.19 kJ/mol for apricot and date molasses, respectively. An efficient predictive model for apparent viscosity values of molasses was constructed using Adaptive Neuro - Fuzzy Inference System (ANFIS) and this model showed satisfactory prediction with high coefficient of determination (0.979-0.999) and low root mean squared error (0.12-0.46).     

The Case of Baku-Tbilisi-Ceyhan Oil Pipeline System: A Review

Baku-Tbilisi-Ceyhan (BTC) Main Export Oil Pipeline Project (MEP) is one of the very good demonstrations of how governments could come together for the same purpose and could promote the realization of the specific project. The BTC project, being the first leg of the East-West Energy Corridor and once treated as a “dream project” by some group of experts, has now almost turned in to a physical entity. Until now, detailed project studies confirmed the project is well within its previously estimated budget of 1.427 billion USD for the Turkish section of the pipeline. The next phase will be the Land Acquisition and Construction Phase, which will take 32 months onwards. BTC-MEP has a maximum capacity of 50 million tons/year (1 million barrels/year) and a total length of 1,743 km.     

Comparison of total antioxidant capacity and phenolic composition of some apple juices with combined HPLC–CUPRAC assay

It was aimed in this study to identify and quantify various constituents (particularly phenolics) of apple juice and to quantitatively compare the total antioxidant capacities of juices obtained from apple varieties grown in Turkey.     

Capacitive micromachined ultrasonic transducers: next-generation arrays for acoustic imaging?

Piezoelectric materials have dominated the ultrasonic transducer technology. Recently, capacitive micromachined ultrasonic transducers (CMUTs) have emerged as an alternative technology offering advantages such as wide bandwidth, ease of fabricating large arrays, and potential for integration with electronics. The aim of this paper is to demonstrate the viability of CMUTs for ultrasound imaging. We present the first pulse-echo phased array B-scan sector images using a 128-element, one-dimensional (1-D) linear CMUT array. We fabricated 64- and 128-element 1-D CMUT arrays with 100% yield and uniform element response across the arrays. These arrays have been operated in immersion with no failure or degradation in performance over the time. For imaging experiments, we built a resolution test phantom roughly mimicking the attenuation properties of soft tissue. We used a PC-based experimental system, including custom-designed electronic circuits to acquire the complete set of 128 x 128 RF A-scans from all transmit-receive element combinations. We obtained the pulse-echo frequency response by analyzing the echo signals from wire targets. These echo signals presented an 80% fractional bandwidth around 3 MHz, including the effect of attenuation in the propagating medium. We reconstructed the B-scan images with a sector angle of 90 degrees and an image depth of 210 mm through offline processing by using RF beamforming and synthetic phased array approaches. The measured 6-dB lateral and axial resolutions at 135 mm depth were 0.0144 radians and 0.3 mm, respectively. The electronic noise floor of the image was more than 50 dB below the maximum mainlobe magnitude. We also performed preliminary investigations on the effects of crosstalk among array elements on the image quality. In the near field, some artifacts were observable extending out from the array to a depth of 2 cm. A tail also was observed in the point spread function (PSF) in the axial direction, indicating the existence of crosstalk. The relative amplitude of this tail with respect to the mainlobe was less than -20 dB.     

Lime-Soda Softening Process Modifications for Enhanced NOM Removal

In this research, a number of process modifications to the lime-soda softening process were examined, including utilization of high Mg-content lime, addition of MgCl2, and the recycling of softening sludge, in order to improve the removal of natural organic matter (NOM) and reduce the formation of disinfection byproducts (DBPs). Jar test results showed that dissolved organic carbon (DOC) removal increased and trihalomethane (THM) formation was reduced as the magnesium in hydrated lime increased, and was directly correlated with the amount of magnesium removed from the system. However, a dolomitic quick lime hydrated under atmospheric conditions resulted in less effective DOC removal due to a lack of available Mg, and subsequently, less co-precipitation of Mg(OH)2-NOM complexes. The addition of MgCl2 to the raw water also increased DOC removal and reduced THM formation in both the presence and absence of softening sludge, with DOC removal increasing as softening sludge and magnesium dosages increased. As high as 43% removal of DOC was achieved at the stoichoimetric lime-soda ash dose in the presence of 457 mg/L sludge and 7.5 mg/L MgCl2, as compared to only 13% removal in the absence of sludge and MgCl2. The recycling of softening sludge had little or no effect on the hardness and the level of inorganic elements in treated water. The results presented here provide new approaches for improving DBP precursor removal during lime-soda softening without significantly increasing lime and soda ash dosage or the generation of waste sludge.     

Improved design procedure for double‐ridged waveguides

This article presents a novel methodology for designing double‐ridged waveguides by numerically optimizing their geometric shape such that they sustain the two prescribed lowest order modes. The field solution to the problem is obtained by using the finite element method. The performance of the microgenetic algorithm and the quasi‐Newton methods is studied for carrying out geometry optimization. This generalized formulation is capable of handling inhomogeneous material fillings in the guide, and computational results are presented to demonstrate the versatility of the proposed technique. © 2002 Wiley Periodicals, Inc. Int J RF and Microwave CAE 12, 530–539, 2002. Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mmce.10053