High heat flux point source sensitivity and localization analysis for an ultrasonic sensor array

State estimation procedures using the extended Kalman filter are investigated for a transient heat transfer problem in which a high heat flux point source is applied on one side of a thin plate and ultrasonic pulse time of flight is measured between spatially separated transducers on the opposite side of the plate. This work is an integral part of an effort to develop a system capable of locating the boundary layer transition region on a hypersonic vehicle aeroshell. Results from thermal conduction experiments involving one-way ultrasonic pulse time of flight measurements are presented. Uncertainties in the experiments and sensitivity to heating source location are discussed. One key finding is that sensitivity to heating source location is greater in the direction normal to the ultrasonic pulse propagation path. Scaled sensitivities to boundary conditions and thermal conductivity are presented and analyzed for all possible source locations using a square sensor grid. While sensitivity to the primary heat flux was determined to be the highest, sensitivity to the other parameters is either on the same order of magnitude or one order of magnitude less. Two different measurement models are compared for heating source localization: (1) directly using the one-way ultrasonic pulse time of flight as the measurement vector and (2) indirectly obtaining distance from the one-way ultrasonic pulse time of flight and then using these obtained distances as the measurement vector in the extended Kalman filter. Heating source localization results and convergence behavior are compared for the two measurement models. Two areas of sensitivity analyses are presented: (1) heat source location relative to sensor array position, and (2) sensor noise. The direct measurement model produced the best results when considering accuracy of converged solution, ability to converge to the correct solution given different initial guesses, and smoothness of convergence behavior.     

A comparison of extended Kalman filter,particle filter,and least squares localization methods for a high heat flux concentrated source

State estimation procedures using the extended Kalman filter, particle filter, and least squares are investigated for a transient heat transfer problem in which a high heat flux concentrated source is applied on one side of a thin plate and ultrasonic pulse time of flight is measured between spatially separated transducers on the opposite side of the plate. This work is an integral part of an effort to develop a system capable of locating the boundary layer transition region on a hypersonic vehicle aeroshell. Results from thermal conduction experiments involving one-way ultrasonic pulse time of flight measurements are presented. Comparisons of heating source localization measurement models are conducted where ultrasonic pulse time of flight readings provide the measurement update to the extended Kalman filter, particle filter, and least squares. Two different measurement models are compared: (1) directly using the one-way ultrasonic pulse time of flight as the measurement vector and (2) indirectly obtaining distance from the one-way ultrasonic pulse time of flight and then using these obtained distances as the measurement vector. For the direct model, the Jacobian required by the extended Kalman filter and least squares is obtained numerically using finite differences and a finite element forward conduction solution. For the indirect model, the derivatives with respect to the state variables are obtained in closed form. Heating source localization results and convergence behavior are compared for the three inverse methods and the two measurement models. The extended Kalman filter, least squares, and particle filter methods using the one-way ultrasonic pulse time of flight measurement model (direct model) produced similar results when considering accuracy of converged solution, ability to converge to the correct solution, and smoothness of convergence behavior. The results provide quantified justification for moving forward with development of an extended Kalman filter-based localization solution.     

Implications of the UK field trial of building mounted horizontal axis micro-wind turbines

Building mounted micro-wind turbines and photovoltaics have the potential to provide widely applicable carbon free electricity generation at the building level. Photovoltaic systems are well understood and it is easy to predict performance using software tools or widely accepted yield estimates. Micro-wind, however, is far more complex and in comparison poorly understood. This paper presents the key findings of the building mounted (<2 kWp) turbine component of the UK micro-wind trial undertaken by the Energy Saving Trust in 2008/09. The monitored performance of 39 horizontal axis turbines in urban, suburban and rural locations is discussed alongside the accuracy of predictive wind speed tools for the sites. The performance of urban and suburban micro-wind sites in the trial was poor with annual generation of less than 75 kWh/m² swept area, the majority of which were less than 25 kWh/m². Good rural sites had an annual generation of between 100 and 280 kWh/m², far less than the nominal 360 kWh/m² (10% load factor for a typical turbine) that is often assumed. In the light of these findings, the potential impact of the UK’s latest policy instrument, the 2010 micro-generation tariffs, is considered for both micro-wind and photovoltaics.     

Assessment of two enzyme-linked immunosorbent assay tests marketed for detection of ruminant proteins in finished feed

The performance characteristics of two enzyme-linked immunosorbent assay (ELISA) test kits, ELISA Technologies' MELISA-Tek test and Tepnel BioSystems' BioKit for (Cooked) Species Identification test, designed to detect ruminant proteins in animal feed, were evaluated. The test kits were evaluated by using acceptance criteria developed by the U.S. Food and Drug Administration's Center for Veterinary Medicine Office of Research for evaluating selectivity, sensitivity, ruggedness, and specificity. The acceptance criteria for determining success used a statistical approach requiring a 90% probability of achieving the correct response within a 95% confidence interval. In practice, this measure requires the test to achieve the correct response 58 times for every 60 samples evaluated, or a 96.7% accuracy rate. A minimum detection level of 0.1% bovine meat and bone meal (BMBM) was required, consistent with the sensitivity of the analytical methods presently used by the U.S. Food and Drug Administration. Selectivity was assessed by testing 60 dairy feed samples that contained no added animal proteins; sensitivity was determined by evaluating 60 samples (per level of fortification) of this same feed that contained 0.025, 0.05, 0.1, 0.25, 0.5, 1, or 2% BMBM. The MELISA-Tek test passed the acceptance set-point criteria for selectivity assessment but failed the sensitivity assessment at all levels except at the 2% level. The MELISA-Tek test came close to passing at the 1% level, detecting true-positive findings at a rate of 93%, but failed at lower levels, in spite of the label claim of 0.5% sensitivity. The BioKit for (Cooked) Species Identification test detected only 2 of 17 samples fortified at the 2% BMBM level and failed to detect any other BMBM-fortified samples. The results of this evaluation indicate that neither test is adequate for regulatory use.     

Development of an optimised papaya pulp nectar using a combination of irradiation and mild heat

Papaya does not sufficiently maintain desired fresh fruit quality when shipped long distances due to an easily bruised soft skin and a short shelf life. This leads to both a large supply of pulp from unsightly fruit that is never shipped and low sales due to blemished fruit. Unfortunately, traditional preservation methods (pasteurisation) negatively alter papaya’s fresh flavour. Thus to effectively utilise available papaya pulp, processing requires an approach that enables retention of papaya’s natural flavours without excessive heat. Papaya fruit (Carica papaya L., var.’s Rainbow (yellow-fleshed) and SunUp (red-fleshed)) were pulped, diluted, and processed with mild heat (80 °C, 5 min), irradiation (5 kGy or 7.5 kGy) or combinations of both. Irradiation resulted in a significant reduction in ascorbic acid content. Mild heat treatment significantly reduced pectinesterase activity and microbiological viability. Irradiation followed by heat further enhanced destruction of Listeria innocua and Clostridium sporogenes and retained the flavour and a nutritional profile closest to untreated controls. The product was microbiologically safe with acceptable enzyme levels and would be shippable under refrigeration.     

Effects of dietary deoiled soy lecithin supplementation on milk production and fatty acid digestibility in Holstein dairy cows

Deoiled soy lecithin is a feed additive enriched in phospholipids. Our study evaluated the effects of dietary deoiled soy lecithin supplementation on (1) milk production and composition, (2) plasma and milk fatty acid (FA) content and yield, and (3) apparent FA digestibility and absorption in lactating dairy cows fed fractionated palm fat. In a split-plot Latin square design, 16 Holstein cows (160 ± 7 days in milk; 3.6 ± 1.2 parity) were randomly allocated to a main plot receiving a corn silage and alfalfa haylage-based diet with palm fat containing either moderate (MPA) or high palmitic acid (HPA) content at 1.75% of ration dry matter (72 or 99% palmitic acid, respectively; n = 8/palm fat diet). On each palm fat diet, deoiled soy lecithin was top-dressed at 0, 0.12, 0.24, or 0.36% of ration dry matter in a replicated 4 × 4 Latin square design. Following a 14-d covariate period, lecithin supplementation spanned 14 d, with milk and blood collected during the final 3 d. Milk composition and pooled plasma markers were measured. The statistical model included the fixed effects of palm fat type, lecithin dose, period, and the interaction between palm fat type and lecithin dose. The random effect of cow nested within palm fat group was also included. Lecithin linearly decreased dry matter intake. In cows fed HPA, lecithin feeding reduced milk fat content and tended to decrease milk fat yield. Although no changes in milk yield were observed, a quadratic reduction in 3.5% fat-corrected milk was observed with increasing lecithin dose. Lecithin linearly increased energy-corrected milk efficiency in cows fed MPA. Lecithin supplementation also decreased milk urea nitrogen, relative to unsupplemented cows. The proportion of 16-carbon FA in milk fat decreased linearly with lecithin dose, whereas 18-carbon FA increased linearly. Lecithin reduced de novo FA (<16-carbon) content and tended to increase preformed FA (>16-carbon) content in a linear manner. Compared with MPA, HPA diets reduced apparent total and 16-carbon FA digestibility and absorption. Deoiled soy lecithin feeding did not modify FA digestibility or absorption. Our observations suggest that soy lecithin feeding modifies rumen digestion to reduce dry matter intake and change milk composition.     

Quantifying remediation effectiveness under variable external forcing using contaminant rating curves

Remediation efforts are typically assessed through before-and-after comparisons of contaminant concentrations or loads. These comparisons can be misleading when external drivers, such as weather conditions, differ between the pre- and postremediation monitoring periods. Here, we show that remediation effectiveness may be better assessed by comparing pre- and postremediation contaminant rating curves, which permit "all else equal" comparisons of pre- and postremediation contaminant concentrations and loads under at any specified external forcing. We illustrate this approach with a remediation case study at an abandoned mercury mine in Northern California. Measured mercury loads in the stream draining the mine site were a factor of 1000 smaller after the remediation than before, superficially suggesting that the cleanup was 99.9% effective, but rainstorms were weaker and less frequent during the postremediation monitoring period. Our analysis shows that this difference in weather conditions alone reduced mercury loads at our site by a factor of 73-85, with a further factor of 12.6-14.5 being attributable to the remediation itself, implying that the cleanup was 92-93% (rather than 99.9%) effective. Our results illustrate the need to account for external confounding drivers when assessing remediation efforts, particularly in systems with highly episodic forcing.     

The effects of acrolein on the thioredoxin system: implications for redox-sensitive signaling

The reactive aldehyde acrolein is a ubiquitous environmental pollutant and is also generated endogenously. It is a strong electrophile and reacts rapidly with nucleophiles including thiolates. This review focuses on the effects of acrolein on thioredoxin reductase (TrxR) and thioredoxin (Trx), which are major regulators of intracellular protein thiol redox balance. Acrolein causes irreversible effects on TrxR and Trx, which are consistent with the formation of covalent adducts to selenocysteine and cysteine residues that are key to their activity. TrxR and Trx are more sensitive than some other redox-sensitive proteins, and their prolonged inhibition could disrupt a number of redox-sensitive functions in cells. Among these effects are the oxidation of peroxiredoxins and the activation of apoptosis signal regulating kinase (ASK1). ASK1 promotes MAP kinase activation, and p38 activation contributes to apoptosis and a number of other acrolein-induced stress responses. Overall, the disruption of the TrxR/Trx system by acrolein could be significant early and prolonged events that affect many aspects of redox-sensitive signaling and oxidant stress.     

Full Wafer In Situ Deposition of Thallium Lead Superconductors

Thin films of (Tl,Pb)Sr₂Ca_0.8Y_0.2Cu₂O₇, and (Tl,Pb)Sr₂CuO₅ can be grown in a single step process which involves sputter deposition from a mixed oxide target and simultaneous thermal evaporation of Tl₂O. The use of a radiant heater has allowed extension of this in situ deposition process to full LaAlO₃ and NdGaO₃ wafers. Variations in the composition of the deposited film is < 4% across a 50 mm wafer while the thickness uniformity is 8%. The highest transition temperature for a (Tl,Pb)Sr₂Ca_0.8Y_0.2 Cu₂O₇ film thus far is 83 K. The RMS surface roughness of (Tl,Pb)Sr₂CuO₅ films is uniform across the wafer and approximately 1% of the film thickness for films 20 to 100 nm thick.     

12-O-tetradecanoylphorbol-13-acetate inhibits aminophospholipid translocase activity and modifies the lateral motions of fluorescent phospholipid analogs in the plasma membrane of bovine aortic endothelial cells

Interstitial cystitis (IC) is a relatively uncommon and enigmatic disorder characterized by pain in the bladder and pelvic region, typically accompanied by urinary urgency and frequency. Fibromyalgia is a more common disorder, with the prominent symptoms being diffuse musculoskeletal pain and fatigue, and it has been well established that there is substantial clinical overlap between fibromyalgia and chronic fatigue syndrome (CFS). Although genitourinary and musculoskeletal symptoms predominate in IC and fibromyalgia respectively, both disorders share a number of features, including similar demographics, "allied conditions" (e.g. irritable bowel syndrome, headaches, etc.), natural history, aggravating factors, and efficacious therapy. We hypothesized that there was substantial clinical overlap between fibromyalgia and IC, and examined cohorts of individuals with these two disorders in parallel, to compare the spectrum of symptomatology. Sixty fibromyalgia patients, 30 IC patients, and 30 age-matched healthy controls were questioned regarding current symptomatology. A dolorimeter examination was also performed in the three groups to assess peripheral nociception. We found that the frequency of current symptoms was very similar for the fibromyalgia and IC groups. Both the fibromyalgia and IC patients displayed increased pain sensitivity when compared to healthy individuals, at both tender and control points. These data suggest that IC and fibromyalgia have significant overlap in symptomatology, and that IC patients display diffusely increased peripheral nociception, as is seen in fibromyalgia. Although central mechanisms have been suspected to contribute to the pathogenesis of fibromyalgia for some time, we speculate that these same types of mechanisms may be operative in IC, which has traditionally been felt to be a bladder disorder.