Microglial FABP4-UCP2 Axis Modulates Neuroinflammation and Cognitive Decline in Obese Mice

The microglial fatty-acid-binding protein 4-uncoupling protein 2 (FABP4-UCP2) axis is a key regulator of neuroinflammation in high-fat-diet (HFD)-fed animals, indicating a role for FABP4 in brain immune response. We hypothesized that the FABP4-UCP2 axis is involved in regulating diet-induced cognitive decline. We tested cognitive function in mice lacking microglial FABP4 (AKO mice). Fifteen-week-old male AKO and wild-type (WT) mice were maintained on 60% HFD or normal chow (NC) for 12 weeks. Body composition was measured using EchoMRI. Locomotor activity, working memory, and spatial memory were assessed using behavioral tests (open field, T-maze, and Barnes maze, respectively). Hippocampal microgliosis was assessed via immunohistochemical staining. An inflammatory cytokine panel was assayed using hippocampal tissue. Real-time RT-PCR was performed to measure microglial UCP2 mRNA expression. Our data support that loss of FABP4 prevents cognitive decline in vivo. HFD-fed WT mice exhibited impaired long- and short-term memory, in contrast with HFD-fed AKO mice. HFD-fed WT mice had an increase in hippocampal inflammatory cytokine expression (IFNγ, IL-1β, IL-5, IL-6, KC/GRO(CXCL1), IL-10, and TNFα) and microgliosis, and decreased microglial UCP2 expression. HFD-fed AKO mice had decreased hippocampal inflammatory cytokine expression and microgliosis and increased microglial UCP2 expression compared to HFD-fed WT mice. Collectively, our work supports the idea that the FABP4-UCP2 axis represents a potential therapeutic target in preventing diet-induced cognitive decline.     

A write-friendly approach to manage namespace of Hadoop distributed file system by utilizing nonvolatile memory

The Journal of Supercomputing - With the emergence of the big data era, various technologies have been proposed to cope with the exascale of data. For a considerably large volume of data, a single...     

Temperature Control of a Regasification System for LNG-fuelled Marine Engines Using Nonlinear Control Techniques

International Journal of Control, Automation and Systems - This paper presents two nonlinear PID (NPID) controllers which control the glycol temperature of a regasification system for LNG-fuelled...     

Preparation and catalytic activity of K4Zr5O12 for the oxidation of soot from vehicle engine emissions

Pure phase K₄Zr₅O₁₂ is synthesized via solid state method in the present work. Various K/Zr ratios and temperatures are applied, and the synthesis process is investigated in detail by means of X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. Its catalytic activity for soot oxidation is studied by temperature programmed oxidation with different types of soot/catalyst contacts. It is revealed that K₄Zr₅O₁₂ is very active in the presence of 2–10% O₂ for both tight and loose contacts (T_p(tight) = 335 °C, T_p(ethanol) = 355 °C and T_p(shaking) = 370 °C). Thermal stability study shows that K₄Zr₅O₁₂ is highly stable up to at least 900 °C.     

Development of dieldrin,endosulfan, and hexachlorobenzene‐imprinted polymers for dye‐displacement array sensing

Due to the toxicity associated with the exposure to organochlorine pesticides, new materials capable of selectively capturing and detecting these compounds are highly desirable. In this study, imprinted polymers were prepared using three organochlorine pesticides—dieldrin (DE), endosulfan (EN), or hexachlorobenzene (HCB) as templates. The MIPs were polymerized via precipitation polymerization. The yields were over 90% with particle sizes ranging from 62 to 214 nm. Binding studies combined with GC‐ECD analysis showed that each template is more selective to its corresponding MIP compared with the other two structurally homologous templates. These results were consistent with those obtained using UV–vis where more bromocresol green (BCG) dye was released when higher template concentrations were introduced to the corresponding BCG‐impregnated MIPs. Since unique selectivity response pattern for each of the MIPs was obtained, this demonstrated that the MIPs were selective and can be potentially used in dye‐displacement array sensing. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44401.     

吸水膨胀弹性体PVA-g-PBA的研究

在水介质中.在氮气保护下以硝酸铈铵(CAN)为引发剂,将丙烯酸丁酯(BA)接枝到聚乙烯醇(PVA)上,制得水膨胀弹性体PVA—g—PBA。通过红外光谱证实了接枝物的形成。讨论了PVA浓度、单体浓度、引发剂浓度和反应温度对接枝物接枝率(G％)的影响。结果表明随PVC浓度增大,接技率降低.[PVA2.5×10-4mol/L.[BA]0.702mol/l、[CAN]0.01mol/L45℃接枝率较高.接枝率越高其吸水膨胀率越低,8h达吸水平衡,最大吸水率为165.1％。     

The catalytic activity and surface characterization of Ln2B2O7 (Ln=Sm, Eu, Gd and Tb; B=Ti or Zr) with pyrochlore structure as novel CH4 combustion catalyst

Ln₂B₂O₇ (Ln=Sm, Eu, Gd and Tb; B=Zr or Ti) with pyrochlore structure was prepared by sol–gel method for the high-temperature catalytic combustion. The crystal structure of Ln₂B₂O₇ was identified by XRD and their surface area was about 4 m²/g after calcinations at 1200 °C. Catalytic activity of methane combustion was observed for Ln₂Zr₂O₇ series and the best catalyst was Sm₂Zr₂O₇. Its relative reaction rate per unit surface area at 600 °C was 2 cm³/m² min, which was twice higher than that of Mn-substituted Sr hexaaluminate. From surface analysis by XPS, the low binding energy of each Ln element of Ln₂Zr₂O₇ compared to that of Ln₂Ti₂O₇, gave the catalytic activity of methane combustion.     

Synthesis of polystyrene/poly(butyl acrylate) core–shell latex and its surface morphology

A polystyrene (PS)/poly(butyl acrylate) (PBA) composite emulsion was produced by seeded emulsion polymerization of butyl acrylate (BA) with PS seed particles which were prepared by emulsifier‐free polymerization of styrene with potassium persulfate (KPS) under a nitrogen atmosphere at 70°C for 24 h with stirring at 60 rpm and swelled with the BA monomer in an ethanol/water medium. The structure of the PS/PBA composite particles was confirmed by the presence of the characteristic absorption band attributed to PS and PBA from FTIR spectra. The particles for pure PS and PS/PBA with a low content of the BA monomer were almost spherical and regular. As the BA monomer content was increased, the particle size of the PS/PBA composite particles became larger, and more golf ball‐like particles were produced. The surface morphology of the PS/PBA composite particles was investigated by AFM and SEM. The T_g's attributed to PS and PBA in the PS/PBA composite particles were found at 110 and ?49°C, respectively. The thermal degradation of the pure PS and PS/PBA composite particles occurred in one and two steps, respectively. With an increasing amount of PBA, the initial thermal decomposition temperature increased. On the contrary the residual weight at 450°C decreased with an increasing amount of PBA. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 595–601, 2003     

Functional polymer–polymer/carbon nanotube bi-component fibers

Bi-component fibers typically combine multiple functions that arise from at least two distinct components. As a result, these fibers can incorporate carbon nanotubes, which impart specific and controllable mechanical, electrical, and thermal transport properties to the fibers. Using gel spinning, sheath-core polyacrylonitrile–polyacrylonitrile/carbon nanotube bi-component fibers with a diameter of less than 20 μm and carbon nanotube concentrations of up to 10 wt% were produced. In these fibers, the carbon nanotubes were well dispersed and aligned along the fiber axis. The fibers exhibited a tensile strength as high as 700 MPa, and a tensile modulus as high as 20 GPa, as well as enhanced electrical and thermal conductivities when compared to the fibers without carbon nanotubes.     

Synthesis of LiNi0.9Co0.1O2 from Li2CO3, NiO or NiCO3, and CoCO3 or Co3O4 and their electrochemical properties

Cathode active materials with a composition of LiNi_0.9Co_0.1O₂ were synthesized by a solid-state reaction method at 850 °C using Li₂CO₃, NiO or NiCO₃, and CoCO₃ or Co₃O₄, as the sources of Li, Ni, and Co, respectively. Electrochemical properties, structure, and microstructure of the synthesized LiNi_0.9Co_0.1O₂ samples were analyzed. The curves of voltage vs. x in Li_xNi_0.9Co_0.1O₂ for the first charge–discharge and the intercalated and deintercalated Li quantity Δx were studied. The destruction of unstable 3b sites and phase transitions were discussed from the first and second charge–discharge curves of voltage vs. x in Li_xNi_0.9Co_0.1O₂. The LiNi_0.9Co_0.1O₂ sample synthesized from Li₂CO₃, NiO, and Co₃O₄ had the largest first discharge capacity (151 mA h/g), with a discharge capacity deterioration rate of −0.8 mA h/g/cycle (that is, a discharge capacity increasing 0.8 mA h/g per cycle).