Ni-based Plasmonic/Magnetic Nanostructures as Efficient Light Absorbers for Steam Generation

Solar steam generation technologies have gained increasing attention due to their great potential for clean water generation with low energy consumption. The rational design of a light absorber that can maximize solar energy utilization is therefore of great importance. Here, the synthesis of Ni@C@SiO₂ core–shell nanoparticles as promising light absorbers for steam generation by taking advantage of the plasmonic excitation of Ni nanoparticles, the broadband absorption of carbon, and the protective function and hydrophilic property of silica is reported. The nanoparticle-based evaporator shows an excellent photothermal efficiency of 91.2%, with an evaporation rate of 1.67 kg m⁻² h⁻¹. The performance can be further enhanced by incorporating the nanoparticles into a polyvinyl alcohol hydrogel to make a composite film. In addition, utilizing the magnetic property of the core–shell particles allows the creation of surface texture in the film by applying an external magnetic field, which helps increase surface roughness and further boost the evaporation rate to as high as 2.25 kg m⁻² h⁻¹.     

Effect of Conductive Particle Properties on the Reliability of Anisotropic Conductive Film for Chip-on-Glass Applications

This paper describes how the material properties of conductive particles in anisotropic conductive films (ACFs) affect the electrical conductivity and the reliability of ACF interconnections for chip-on-glass (COG) applications. For the conductive particles, Au/Ni-coated polymer particles with a 5-diameter were used. Two different types of conductive particles were characterized with respect to their mechanical and electrical properties, such as ball hardness, recovery behavior, and electrical resistance. In addition, two ACFs were fabricated in the form of a double-layered structure, in which the thickness of the ACF and a nonconductive film (NCF) layer were optimized to have as many conductive particles as possible on the bump after COG bonding. The electrical contact resistance of an ACF interconnection in a COG structure depends mainly on the electrical properties of conductive particles in the ACF. The electrical reliability of an ACF interconnection in a COG structure also depends more on the electrical properties than the mechanical properties of conductive particles under a high-temperature and humid condition. Conductive particles with a lower electrical resistance, higher mechanical hardness, and lower recovery rate show better reliability than conductive particles with a higher electrical resistance, lower mechanical hardness, and higher recovery rate. Cross-sectional scanning electron microscopic (SEM) pictures of a COG interconnection show the deformation of two different conductive particles after the reliability tests. The ACF interconnections in the edge or corner of a driver IC show less reliable joints due to high absorption of moisture.     

Application of Plasma-Doping (PLAD) Technique to Reduce Dark Current of CMOS Image Sensors

Plasma doping (PLAD) was applied to reduce the dark current of CMOS image sensor (CIS), for the first time. PLAD was employed around shallow trench isolation (STI) to screen the defective sidewalls and edges of STI from the depletion region of photodiode. This technique can provide not only shallow but also conformal doping around the STI, making it a suitable doping technique for pinning purposes for CISs with sub-2-mum pixel pitch. The measured results show that temporal noise and dark signal deviation as well as dark level decrease     

Predictive model of a reduced surface field p-LDMOSFET using neural network

Due to complex dynamics, it has been extremely difficult to model high power devices. A predictive model is constructed by using a backpropagation neural network (BPNN). The BPNN was applied to predict electrical characteristics of a reduced surface field p-channel lateral double-diffused MOSFET. Drain–source currents for applied drain–source voltages were measured with a HP4156A. Prediction performance of BPNN model was optimized with variations in training factors. With respect to the reference models, the optimized models demonstrated considerably improved predictions. Model predictions were highly consistent with actual measurements. Further improvement was obtained by constructing a modular network comprising multiple BPNNs.     

External force of snake: virtual electric field

Gradient vector flow (GVF) is an external force of snake that overcomes traditional snake's problems: limited capture range and poor convergence to concave boundaries. A new external force with the same properties as the GVF is proposed. The proposed method has much shorter computational time than the GVF.     

Design of a laminated current cell relocation 12-bit CMOS D/A converter with a high output impedance technique and a merged switching logic

A compact and low power 12-bit 300 MS/s current steering CMOS D/A converter is presented. The architecture of the D/A converter is based on the current steering 6 + 6 segmented type with a laminated current cell relocation technique. In order to improve the linearity and glitch noise, a high output impedance analog current cell is designed. Furthermore, for the purpose of reducing the chip area and power dissipation, a noble merged switching logic and a compact layout technique are proposed. To verify its performance, the chip was fabricated with 0.13 μm thick-gate 1-poly 6-metal N-well Samsung CMOS technology. The effective chip area is 0.26 mm² (510 × 510 μm) with a power consumption of 100 mW. The measured INL and DNL are within ±3LSB and ±1LSB, respectively. The measured SFDR is about 70 dB, when the input frequency is 1 MHz at a clock frequency of 300 MHz.     

40 GHz Vertical Transition with a Dual‐Mode Cavity for a Low‐Temperature Co‐fired Ceramic Transceiver Module

A new vertical transition between a substrate integrated waveguide in a low‐temperature co‐fired ceramic substrate and an air‐filled standard waveguide is proposed in this paper. A rectangular cavity resonator with closely spaced metallic vias is designed to connect the substrate integrated waveguide to the standard air‐filled waveguide. Physical characteristics of an air‐filled WR‐22 to WR‐22 transition are compared with those of the proposed transition. Simulation and experiment demonstrate that the proposed transition shows a ?1.3 dB insertion loss and 6.2 GHz bandwidth with a 10 dB return loss for the back‐to‐back module. A 40 GHz low‐temperature co‐fired ceramic module with the proposed vertical transition is also implemented. The implemented module is very compact, measuring 57 mm × 28 mm × 3.3 mm.     

Application of TerraSAR-X Data for Emergent Oil-Spill Monitoring

Synthetic aperture radar (SAR) signals can propagate through hazardous weather and atmospheric conditions with heavy cloud cover, volcanic dust, snow, or rain. The all-weather capabilities of SARs have attracted significant interest in remote sensing communities, since serious environmental disasters such as oil spills have been highly “elusive” to optical sensors, making visible spectrum data vulnerable to rapidly changing atmospheric conditions. In this paper, we discuss the technical functionalities of TerraSAR-X from the emergency response perspective, describing its technical abilities in terms of a damping ratio, radiometric accuracy, and noise level with reference to the actual Hebei Spirit oil-spill incident that occurred on the west coast of the Korean peninsula in December 2007. The damping ratios estimated from the TerraSAR-X data as a function of Bragg wavenumber for various wind speeds indicate that TerraSAR-X data can be effectively used to identify oil-spill areas with acceptable accuracy. We also received ERS-2, ENVISAT, RADARSAT-1, and ALOS PALSAR data for this oil-spill event, not simultaneously but with varying time delays. The processing results for the multitemporal data sets obtained from the X- and C-band SAR systems are useful since they can be used to determine the near-real-time migration of spilt oil. The results of the current study indicate that there are distinct advantages of using X-band TerraSAR-X data for oil-spill detection compared to the data obtained at other available frequencies.      

Modeling of spiking analog neural circuits using organic semiconductor thin film transistors with silicon oxide nitride semiconductor gates

This paper uses the results of the characterization of amorphous semiconductor thin film transistors (TFTs) with the quasi-permanent memory structure referred to as silicon oxide nitride semiconductor (SONOS) gates, to model spiking neural circuits. SONOS gates were fabricated and characterized. In addition, MOSFETs using organic copper phthalocyanine (CuPc) were fabricated with these SONOS gates to demonstrate proof of concept performance. Analog spiking circuits were then modeled using these low performance TFTs to demonstrate the general suitability of organic TFTs in neural circuits. The basic circuit utilizes a standard comparator with charge and discharge circuits. A simple Hebbian learning circuit was added to charge and discharge the SONOS device. The use of these elements allows for the design and fabrication of high-density 3-dimensional circuits that can achieve the interconnect density of biological neural systems.     

Characteristics of P-channel SOI LDMOS Transistor with Tapered Field Oxides

A new tapered TEOS oxide technique has been developed to use field oxide of the power integrated circuits. It provides better uniformity of less than 3 % and reproducibility. On-resistance of P-channel RESURF (REduced SURface Field) LDMOS transistors has been optimized and improved by using a novel simulation and tapered TEOS field oxide on the drift region of the devices. With the similar breakdown voltage, at V_gs = ?5.0 V, the specific on-resistance of the LDMOS with the tapered field oxide is about 31.5 mΩ · cm², while that of the LDMOS with the conventional field oxide is about 57 mΩ · cm².