Geochemical characteristics of the Yufuin outflow plume, Beppu hydrothermal system, Japan

Thermal water at Yufuin (Kyushu Island, Japan) is tapped through about 820 shallow wells and used mainly for hot-spring bathing purposes. Chemical and isotopic data for fluids from wells and fumaroles in Yufuin and Beppu indicate that the thermal activity at Yufuin represents a dilute, westward-flowing hydrothermal outflow plume from the Beppu hydrothermal system. Two other (eastward-flowing) outflow plumes have long been recognized at Beppu, but the Yufuin outflow plume is first recognized here. The Yufuin outflow plume is apparently a mixture of two end-member fluids: (1) deep high-temperature (250–300°C) fluid from the Beppu system having high chloride concentration (1400–1600 mg/L) and a δ¹⁸O value near −6.0%, and (2) meteoric water having low chloride concentration (≤7 mg/L) and a δ¹⁸O value near −9.2%.A permeable conduit for the vertical and lateral transport of deep fluid from the Beppu system is provided by the Yufuin Fault zone, which extends westward from the southern flank of Mt. Tsurumi volcano to the town of Yufuin. Stable isotope ratios and chloride concentrations for shallow groundwaters near the eastern end of the fault, at an elevation near 700 m, are consistent with those required for the low-chloride meteoric end-member of the Yufuin thermal waters. Recharge of this meteoric water, as well as mixing with the Beppu deep fluid, may occur along the Yufuin Fault. Enthalpy-chloride relations indicate additional conductive heating of the Yufuin waters, in the amount of 350–500 kJ/kg beyond that which can be accounted for by mixing between Beppu deep fluid and meteoric water. This could be a result of conductive heating with convection to a depth of 1–2 km. Estimates of the magnitude of the heat source for the Beppu hydrothermal system should take into account the heat being discharged at Yufuin.     

Nickel/microcapsules composite electrocoatings; the synthesis of water-containing microcapsules and preparation of the coatings

Composite coatings, the product of electrolytic codeposition of solid particles in a metallic matrix have been developed and utilized in industry as wear resistant coatings. The work described in this paper concerns the development of water-containing metallic coatings prepared by the electrolytic codeposition of water-containing microcapsules from nickel Watts plating baths under pulse reversed current conditions. The water-containing polystyrene microcapsules employed in the codeposition experiments were produced by the complex emulsion/solvent evaporation technique. The influence of the use of two types of stabilizers on the size and the surface chemistry of the microcapsules is discussed. The microcapsules prepared in both cases are rigid spheres with compact walls and a smooth surface. The different stabilizers showed a significant influence on the dispersability of the capsules in the plating solution and their codeposition behaviour. The codeposition experiments carried out with the use of a rotating disc electrode revealed the influence of the plating parameters on the incorporation procedure and on the quality of the composite electrodeposits.     

Testing images independently of translations and linear deformations

This article considers the theory of construction of criteria that are independent of the motions of images, as as well rotations and linear deformations. A method is presented for construction of new types of criteria that have the following distinctive features: they make it easy to construct functionals for measurement of the characteristics of motion of standard images; the theory can easily be extended to the case of grey-scale and colored images; the criteria that are obtained are amenable to parallel computation; the proposed theory makes it easy to construct new criteria. Translated from Izmeritel’naya Tekhnika, No. 8, pp. 13–16, August, 1996.     

Adhesion of streptococci to saliva-coated and uncoated composite-based resins

This study was designed to evaluate the bacterial adhesion to five types of experimental composite-based resins and a commercial composite resin used as a control. Physicochemical surface characteristics of composite resins with and without an artificial saliva coating were measured. The relationship between the numbers of adhering cells (Streptococcus sanguis, S. mutans and S. sobrinus) and surface characteristics was analysed. The values of contact angles and the number of adhering cells were small with saliva coating. S. sanguis ATCC 10557 showed a positive correlation (r=0.835, p<0.05) with the contact angles of uncoated resins, whereas no relationship was observed for saliva-coated resins. With S. mutans Ingbritt the cell numbers adhering to resins correlated strongly (p<0.01) with the values of zeta potential of resins for either saliva coated or uncoated. Electrical repulsion forces had a strong contribution to adherence of cells such as S. mutans and S. sobrinus which show a high absolute zeta potential.     

A simple and effective precoding scheme for noise whitening onintersymbol interference channels

A precoding scheme for noise whitening on intersymbol interference (ISI) channels is presented. This scheme is compatible with trellis-coded modulation and, unlike Tomlinson precoding, allows constellation shaping. It can be used with almost any shaping scheme, including the optimal SVQ shaping, as opposed to trellis precoding, which can only be used with trellis shaping. The implementation complexity of this scheme is minimal-only three times that of the noise prediction filter, hence effective noise whitening can be achieved by using a high-order predictor     

Crack growth and residual strength characteristics of two grades of glass-reinforced aluminium ‘Glare’

Crack growth and residual strength tests have been conducted on both Glare 3 and Glare 4 material. Results have been compared with those for 2024-T3 monolithic aluminium alloy showing improvements in fatigue life of up to 100 times and improvements in residual strengths of up to 40%. The potential weight savings and general structural performance improvements of the Glare material make it most attractive for future aerospace vehicle design, despite its current higher manufacturing costs.     

Anomalous photoemission threshold in high-T c oxide superconductor with Cs and K submonolayers

The photoemission threshold and photocurrent spectra were investigated for Bi₂Sr₂CaCu₂O₈ crystals with K or Cs submonolayer films. The different films of K or Cs were deposited on the Bi-O surface in the temperature range 80–250 K. We observed an appreciable (up to 0.3 eV) energy shift of the threshold and a strong modification of the photocurrent spectra for different temperatures and submonolayer coverages. The appropriate model of such a phenomena is based on a quasimetallic K or Cs clusters effect and additional 2D-polaronic effect.     

Chemical control of superconducting properties of (Y,Ca)(Sr,Ba)2Cu2.7Ga0.3O7−δ

The partial substitution of Ga at the Cu(1) (chain) sites of the YBa₂Cu₃O₇ structure allows synthesis at ambient pressure of Ba-free analogs, e.g., YSr₂Cu_2.7Ga_0.3O_7?δ . Materials with this composition have been found to be nonsuperconducting, but superconductivity has been induced by one or more of the following methods: Ca substitutions at the Y site; Ba substitutions at the Sr site; annealing in high-pressure oxygen. The influence of these chemical manipulations onT _c has been monitored and all methods have been found to enhanceT _c . The electronic effects of Ba substitutions have been deduced indirectly using powder neutron diffraction, and such substitutions appear to result in a redistribution of hole density into the Cu(1) sites from the superconducting CuO₂ planes.