Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Extinction of dispersed heterogeneous systems

We consider extinction of various dispersed systems. Isolated boron particles and boron particles in gases are studied. Stability analysis of steady-state thermal regimes of reacting heterogeneous systems for the case of two parallel reactions on the reaction surface using the Frank-Kamenetskii method gives extinction conditions in oxygen-containing media. Curves of the extinction particle size versus the ambient temperature, oxidizer concentration, and, for particles in gases, also versus the oxidizer-to-fuel ratio are plotted. Approximate analytical calculations showed that the extinction process can be most actively controlled by varying the combustion temperature: a decrease in the latter increases the extinction particle size and decreases the completeness of fuel combustion. It is shown that at low ambient temperatures the extinction particle size for suspensions is larger than that for isolated particles. This effect is caused by a decrease in the oxidizer concentration during combustion of suspensions. At high temperatures, the role of this factor weakens.Translated from Fizika Goreniya i Vzryva, Vol. 32, No. 6, pp. 12–19, November–December, 1996.     

The influence of phosphate on the properties of clay bricks

The fabrication, properties and composition of heated phosphate-bonded clay bricks are reported. The strength of phosphate-bonded clay bodies is shown to be related to the equilibrium pH of the clay mix. The highest strengths were obtained for mixes with equilibrium pH 7 fired at 500°C which gave a modulus of rupture 60% higher than the unmodified clay heated under similar conditions but at 800°C firing temperature. The phosphate-bonded products were also of low porosity and improved dimensional stability. An insight into the probable mechanism of strength development of the heated product has been obtained from XRD, SEM and DSC studies. The results show that the properties of the phosphate-bonded clay bodies are critically affected by new mineral phases resulting from the reactions of phosphates with clay which subsequently undergo physico-chemical changes above 550°C.     

Study of the nozzle flow in a cross-flow turbine

An investigation of the flow inside the nozzle of a Cross-Flow turbine, which is a hydraulic turbine where the rectangular water jet issuing from the nozzle crosses the rotor blades twice, is presented here. Part of the investigation consisted in the experimental measurement of the static pressure distribution on the inside walls of two different nozzle configurations, both with the nozzle mounted alone and in the presence of a rotor. The tests performed in the presence of a rotor included the measurement of efficiency and covered a wide range of working conditions around the best efficiency point. The analysis of the results obtained in this way give us an indication of the influence of the turbine non-dimensional volume flow rate on the flow inside the nozzle and the way it affects the reaction degree of the machine and its efficiency level. Although most of the tests were carried out with a 25-blade rotor, one of the analysed nozzle configurations (that with an inside vane) was also tested with a 10-blade rotor, permitting the assessment of the effect the number of blades has on the flow in the nozzle.The flow inside the nozzle with no inside vane was numerically analysed using a method based on a Schwarz-Christoffel conformal transformation of variables. The numerical results show a fair agreement with the experimental data collected when the rotor was not present. A qualitative discussion of some of the losses occurring in the nozzle is advanced based on the computer results, and its conclusions are used for explaining the poor performance of the nozzle with no inside vane.     

Novel diterpenoid diacylglycerols from marine molluscs: potent morphogens and protein kinase C activators

Five novel 1,2-sn-diacylglycerols with diterpenoid acyl moieties in the sn-1 position were isolated and characterized, together with the corresponding 1,3-sn-diacylglycerols, from three species of dorid nudibranchs molluscs. Their potent activity as morphogens in vivo in the Hydra tentacle regeneration assay and their parallel activity as activators of rat brain protein kinase C (PKC) in vitro are reported here. Our findings promote the use of these compounds as useful molecular probes for both in vivo and in vitro studies on the participation of PKC in cell development.     

Performance model of interactive video-on-demand systems

An interactive video-on-demand (VoD) system allows users to access video services, such as movies, electronic encyclopedia, interactive games, and educational videos from video servers on a broadband network. This paper develops a performance evaluation tool for the system design. In particular, a user activity model is developed to describe the usage of system resources, i.e., network bandwidth and video server usage, by a user as it interacts with the service. In addition, we allow batching of user requests, and the effect of such batching is captured in a batching model. Our proposed queueing model integrates both the user activity and the batching model. This model can be used to determine the requirements of network bandwidth and video server and, hence, the trade-off in communication and storage costs for different system resource configurations     

Estimation of the through porosity of cloth made of chemical fibres in a blend with natural fibres and its correlation with air permeability

The accuracy and reliability of experimental data are determined by the choice of the method of determining the structural characteristics of materials to a significant degree. The data on the level of correlation and the type of functional dependence of the properties on the structure of materials obtained by correlation and regression analysis are a function of the reliability of the experimental data to a significant degree. Of the three methods of estimating the through porosity of materials examined here, the simplest and most widely used method of calculation provides the least reliable results. The most reliable data on through porosity can be obtained by the projection method of indirect estimation of the through porosity and it is recommended for practical research, especially when processing of materials with defined properties is the final goal.St. Petersburg State University of Design and Technology. Translated from Khimicheskie Volokna, No. 3, pp. 31–33, May–June, 1995.     

Modeling electromigration lifetime under bidirectional currentstress

Electromigration reliability of interconnect under bidirectional current stress has been studied in a wide frequency range (mHz to 200 MHz). Experimental results show that the AC lifetime rises with the stress current frequency. The current density exponent and the activation energy of AC lifetime are found to be twice that of DC lifetime. Pure AC current stress failure at extremely high current density is believed to result from thermal migration of metal at hot/cold transition points