Response to Zenz and Altiner

Ordered mixes were produced using a fructose-based excipient as a coarse carrier component and fine-particle pyridoxine hydrochloride (vitamin B₆) as the adherent component. Prior to mixing, the fructose agglomerates were conditioned for 48 h at either 0% RH or 55% RH at 20 °C. Under these conditions, one lot of fructose had a moisture content of 0.24 wt.% and the other lot had a moisture content of 0.74 wt.%. Following mixing, the powders were subjected to vibration at various frequencies in the range 25 to 200 Hz and accelerations in the range 9.81 to 39.24 m/s². It was found that whilst ordered mixes produced using fructose at 0.24 wt.% moisture content were unstable, those produced using 0.74 wt.% moisture content fructose were extremely stable and segregation resistant.The formation of ordered units with increased adhesion in carriers with higher moisture content suggested that these ordered mixes could be considered as spontaneous granulations.     

Type synthesis of spatial mechanisms on the basis of spatial single loop structural groupsTypensynthese räumlicher mechanismen auf der grundlage räumlicher einfach geschlossener strukturgruppen

This paper describes the basis for a new method of type synthesis of spatial mechanisms with the use of single-loop structural groups having zero degrees of freedom. Applying the binary system, the value 0 is used for R (revolute) and 1 is used for P (prismatic) pairs. The five-link spatial groups are described by codes both in the binary and decimal systems. All other groups are reduced to the basis of five-link spatial groups. In these cases two-degree-of-freedom and three-degree-of-freedom kinematic pairs are transformed to one-degree-of-freedom pairs, and these transformations are also described by codes in the binary and decimal systems. This method of coding can be programmed for digital computation and applied towards the automatic type synthesis in the design of spatial mechanisms. The system is equally clear for alphanumeric or for graphical display. To the designer it defines the diagram of the mechanism, pointing out the frame, the mobile links, the types of the kinematic pairs and their mutual disposition in the mechanism configuration.     

A new technique for on-line and off-line high speed computation

A novel technique for both online and offline computation is presented. With this technique, a reconstruction analysis in elementary particle physics, otherwise prohibitively long, has been accomplished. It will be used online in an upcoming Fermilab experiment to reconstruct more than 100000 events per second and to trigger on the basis of that information. The technique delivers 40 gigaoperations per second, has a bandwidth on the order of gigabytes per second, and has a modest cost. An overview of the program, details of the system, and performance measurements are presented     

Magnetism in SiC implanted with high doses of Fe and Mn

High concentrations (0.1–5 at.%) of Mn or Fe were introduced into the near-surface region (≤2000 Å) of 6H-SiC substrates by direct implantation at ～300°C. After annealing at temperatures up to 1000°C, the structural properties were examined by transmission electron microscopy (TEM) and selected-area diffraction pattern (SADP) analysis. The magnetic properties were examined by SQUID magnetometry. While the Mn-implanted samples were paramagnetic over the entire dose range investigated, the Fe-implanted material displayed a ferromagnetic contribution present at <175 K for the highest dose conditions. No secondary phases were detected, at least not to the sensitivity of TEM or SADP.     

Thermal degradation of cinnamoylated poly(vinyl alcohol)

Thermogravimetry and pyrolysis in combination with gas chromatography and infrared spectroscopy were the experimental techniques applied to the thermal degradation of cinnamoylated poly(vinyl alcohol) samples, constituted from vinyl alcohol-vinyl cinnamate photocrosslinkable copolymers. The thermal decomposition products include gases, liquids and solids. The gases are formed from saturated and unsaturated volatile hydrocarbons C₁? C₄, carbon monoxide and carbon dioxide. The liquid fraction includes aromatic hydrocarbons and some oxygenated organic compounds. The solid product identified in the greatest amount was cinnamic acid. The content in the thermal decomposition products varies considerably both with copolymer composition and temperature.     

Linear viscoelastic properties of mixtures of 3- and 4-arm polybutadiene stars

The viscoelastic properties of a three-arm and a four-arm star polybutadiene with the same arm molecular weight (M_a) were studied. The zero-shear recoverable compliance (J⁰_e) and plateau modulus (G⁰_N) for these stars are the same. The zero-shear viscosity (η₀) of the three-arm star is 20% lower than that of the four-arm star. Mixtures of the stars had J⁰_e and G⁰_N unchanged. A $\text{50}\text{50}$ mixture of the three- and four-arm star was diluted with a low molecular weight linear polybutadiene. G⁰_N∝ø²; J⁰_e∝ø^?1 and M_e∝ø^?1, as expected for dilution with a θ-solvent.     

An X-ray study of particulate solids flow in a cylindrical bunker

The noise generated by a ball mill during a batch grinding operation is investigated and the results show that, for a given ore, the noise levels may vary with time of grind, ore charge weight and mill speed. The role of the ore in absorbing noise energy is suggested as a possible control variable for the grinding process and as an indicator of product size distribution. The relationship between ore types and mill noise is also examined and, under conditions of wet grinding, it is demonstrated that mill noise analysis can indicate ore type and may have a possible use as a grindability-type parameter.     

Tunable multifunction logic modules based on parametric representation of functions of k-valued logic over quasifields

We propose a new class of tunable logic modules that realize functions of k-valued logic. These modules are characterized by homogeneous structure and linear dependence of the number of tunable inputs on the number of input variables.Translated from Kibernetika i Sistemnyi Analiz, No. 4, pp. 24–29, July–August, 1991.