锂离子二次电池

锂离子二次电池的体积比能量和质量比能量分别为金属氢化物－镍电池的约１．５倍和２倍。为充分发挥锂离子电池比能量高这一特点，生产电子设备的厂家在设计使用该类电池的整机线路时必须充分考虑到该类电池的有关特性、使用方法及电路设计原则，包括放电电流的控制、充电方式的选择、充电电压的限制以及避免过充放等     

钢筋混凝土的粘结强度理论

从能量原理出发，把钢筋混凝土看成为一种纤维增强复合材料，利用已有的实验回归公式，推导出了钢筋混凝土中钢筋与混凝土的脱开条件，给出了钢筋的拔出长度与拔出载荷的关系。     

季节冻土区挡土墙水平冻胀力设计取值

论述了作用在季节冻土区水工挡土墙结构上的水平冻胀力压强分布图形和设计取值方法，为确定挡土墙结构上的冻胀荷载提供一个实用方法。     

信息转接死锁避免的动态优化算法

对于动态传输路径，给出了每个结点至少两个缓冲的信息转接网死锁避免问题，所提出的死锁避免算法从缓冲利用的角度看是优化的。同时给出了死锁无关的证明及其条件，这对于并行计算处理问题是有益的。     

薄壁黄铜天线套管成型的试验研究

介绍了开发研制薄壁黄铜小直径天线套管的拉伸工艺及理论，并对拉伸断裂的塑性变形理论进行了分析探讨，进而对游动芯头拉伸与应用，提出工艺改进和提高管材表面质量的措施。     

激波绕尖劈障碍物运动粘性流场的数值模拟研究

本文以数值方法研究了运动激波绕射的非定常粘性流的发展过程．计算中采用二阶ＴＶＤ差分格式求解二维非定常薄层Ｎａｖｉｏｒ－Ｓｔｏｋｅｓ方程，得到了清晰的流场结构图谱，分析了产生局部粘性分离的现象．研究结果表明，本文的方法可以很好地描述激波绕射的复杂流动，对流场间断有较高的捕获能力，同时表明在激波障碍物干扰的绕射场研究中局部粘性效应作用是不可忽视的重要因素     

A simple adaptive PI controller for linear systems with constantdisturbances

It is known that an adaptive controller via high-gain output feedback can globally stabilize a class of minimum phase systems with relative degree one. However, exact output regulation is difficult for systems with disturbances. In this paper, we consider linear single-input/single-output (SISO) systems with unknown constant disturbances. We present a simple adaptive output feedback controller with an integral action and show that it can asymptotically stabilize those disturbed systems. The proposed PI type adaptive controller can also deal with the output tracking problem of a step reference     

数字集成电路的可测性设计及其应用

首先论述了可测性设计的概念，分析了时序电路测试生成面临的困境。然后介绍了可测性设计的专门方法，并举例说明了它在实际中的应用。     

Summative evaluation of the SINCGARS Tutor

In an earlier set of studies with a different Intelligently Coached Simulation (Orey, M.A., Fan, H., Park, J., Tzeng, S., & Gustafson, K. (1995). Evaluation of Device operator in a context of a coached simulation environment), we found a retention and a transfer problem. We tried to solve these problems while building a new Intelligently Coached Simulation (the SINCGARS Tutor). The solutions to the two problems were to use an interactive conceptual model for the retention problem and we used photographs of the equipment as the visuals of the simulation. We then tested this new tutor with a group of 22 officers who were not only required to know how to operate the SINCGARS radio, but would be responsible for teaching others in their unit when their training was complete. We had one group of officers train on the real equipment, in pairs, with one instructor available for guidance. The other group of 11 learned via the SINCGARS Tutor. The post test was to put an actual radio into operation while being observed by a trained observer. Results indicate that not only did the transfer problem go away, but officers trained on the computer performed the task more accurately both initially on the immediate post test and again on a surprise four-week delayed post test. The SINCGARS Tutor was found to be a very good training solution.     

基于USB的高速数据采集系统的设计

本文介绍基于ARM7控制芯片S3C44B0X、DSP芯片TMS320VC5409和USB芯片PDIUS-BD12的高速数据采集系统的设计,给出数据采集系统的硬件设计构架,并且阐述各个部分的功能.文中着重讲述系统中USB接口部分的硬件设计、软件开发流程和USB的枚举过程.文中给出USB软件设计分层图,以及USB设备初始化的软件流程图,实现了基于USB接口的高速数据采集系统.