A comparative study on the antioxidative and anti‐allergic activities of fresh and aged black garlic extracts

The antioxidative and anti‐allergic activities of fresh and aged black garlic extracts were investigated. The garlic samples were extracted with 70% ethanol (v/v) and the total phenolic content was measured. The antioxidant capacity of extracts was assessed by determining the scavenging activities on 1,1‐diphenyl‐2‐picrylhydrazyl and hydroxyl radicals, ferricyanide reducing power, ferrous ion‐chelating ability and inhibitory effect on linoleic acid peroxidation. The anti‐allergic activity of extracts was analysed by measuring their inhibitory effects against β‐hexosaminidase release. The aged black garlic exhibited significantly higher phenolic content and greater antioxidative activity than fresh garlic. Both garlic extracts showed strong antioxidant capacity in a dose‐dependent manner. On the other hand, a considerably higher suppression of β‐hexosaminidase release was found in fresh garlic extract at lower concentration compared with that of the black garlic. Results of this study illustrate that ageing of garlic could enhance its antioxidant capacity, but could decrease its anti‐allergic activity.     

A vacuum-sealed miniature X-ray tube based on carbon nanotube field emitters

ABSTRACT: A vacuum-sealed miniature X-ray tube based on a carbon nanotube field-emission electron source has been demonstrated. The diameter of the X-ray tube is 10 mm; the total length of the tube is 50 mm, and no external vacuum pump is required for the operation. The maximum tube voltage reaches up to 70 kV, and the X-ray tube generates intense X-rays with the air kerma strength of 108 Gy * cm2 min1. In addition, X-rays produced from the miniature X-ray tube have a comparatively uniform spatial dose distribution.     

High-temperature strength and damage evolution in short fiber reinforced aluminum alloys studied by miniature creep testing and synchrotron microtomography

The creep behavior of a squeeze-cast, short fiber reinforced Al metal matrix composite (MMC), consisting of an Al-11 wt.% Zn-0.2 wt.% Mg alloy reinforced with 15 vol.% Al₂O₃ Saffil® short fibers is investigated using miniature creep specimens. The small dimensions of the miniature creep specimens permit them to be machined from regions of an MMC block with different microstructures, thus allowing the effect of grain size and fiber texture on creep to be investigated on a more local level than is possible using conventional specimen geometries. The miniature creep specimens are subjected to uniaxial tensile stresses ranging from 3 to 40 MPa at temperatures between 573 and 623 K. It is shown that tests performed using the miniature creep specimen geometry are in good agreement with results previously obtained with standard creep specimens. Through interrupted creep experiments, it is observed that the creep back flow that occurs after unloading increases with increasing accumulated plastic strain. In the as-cast MMC, synchrotron microtomography reveals a fine distribution of pores whose spatial density increases with the spatial density of the fibers. The presence of fractured fibers in the crept MMC is also revealed. Some of the regions between fractured fiber fragments appear to be filled with matrix material, while others are voided.     

Effect of green mate in overweight volunteers: A randomized placebo-controlled human study

Overweight and obesity have become a global epidemic and they may impair health. Traditional use and growing evidence indicate that mate (Ilex paraguariensis A. St.-Hil.) may be helpful in losing excessive weight and fat. The present randomized, double-blind, placebo-controlled study evaluated efficacy and safety of an extract from green mate in 60 overweight subjects aged 20–39 years during 6-weeks. Body composition was measured by Dual-Energy X-ray Absorptiometry (DEXA) at baseline and after 6 weeks. Body weight, body mass index (BMI), waist circumference (WC) and various safety parameters were monitored. After 6 weeks, subjects taking mate experienced a significantly greater reduction of percent of body fat (?0.3% vs. +0.6%, p = 0.04) and fat mass (?0.5 kg vs. +0.2 kg, p = 0.04) than placebo. No significant differences were observed in other measurements. No adverse events occurred and all safety parameters were within normal ranges during the study in both groups. Thus, taking green mate extract reduced body fat after 6 weeks, while the treatment was safe and well tolerated.     

Development of an embedded solar tracker for the enhancement of solar energy utilization

An embedded two‐axis solar tracking system using Laboratory Virtual Instrumentation Engineering Workbench to write the operation and control algorithms was developed for enhancing solar energy utilization. The system consists of a real‐time processor, two motion‐control modules, two step drives, two step motors, feedback devices, and other accessories needed for functional stability. The real‐time processor allows the solar tracker to be used as a stand‐alone, real‐time system that can operate automatically without any external control. The system combines two different solar tracking methods: the optical method and the astronomical method. Cadmium Sulfide (CdS) sensors are employed to continuously generate feedback signals to the controller, ensuring high‐precision solar tracking even under adverse conditions. The CdS sensor is a resistor whose electric resistance decreases with increasing incident light intensity. A database of solar altitude, azimuth, and sunrise and sunset times is provided by this solar tracking system. Other solar trackers operating in an astronomical method may access and use this database over the Internet. Solar position and sunrise and sunset times in the database were compared with those of the Astronomical Applications Department of the U.S. Naval Observatory. The differences were found to be negligible. Copyright © 2011 John Wiley & Sons, Ltd.     

乔后盐矿斜井溶腔形状初探

斜井三管油垫单井开采在国内为数不多，探讨其溶腔形状及运行参数对安全生产、采矿量计算起到至关重要的指导作用。     

Hiring Qualified College Graduates: MIS Business Majors Versus Computer Science Majors

When decisions must be made regarding systems productivity and control trade-offs, many companies automatically opt for productivity improvement. However, critical functions, documentation, testing, and training are sometimes sacrificed. To establish a balance between these competing needs, MIS management should educate systems developers and users about the nature of and need for controls.