Processing of Particle-Stabilized Wet Foams Into Porous Ceramics

Direct foaming of colloidal suspensions is a simple and versatile approach for the fabrication of macroporous ceramic materials. Wet foams produced by this method can be stabilized by long-chain surfactants or by colloidal particles. In this work, we investigate the processing of particle-stabilized wet foams into crack-free macroporous ceramics. The processing steps are discussed with particular emphasis on the consolidation and drying process of wet foams. Macroporous alumina ceramics prepared using different consolidation and drying methods are compared in terms of their final microstructure, porosity, and compressive strength. Consolidation of the wet foam by particle coagulation before drying resulted in porous alumina with a closed-cell structure, a porosity of 86.5%, an average cell size of 35 μm, and a remarkable compressive strength of 16.3 MPa. On the other hand, wet foams consolidated via gelation of the liquid within the foam lamella led to porous structures with interconnected cells in the size range from 100 to 150 μm. The tailored microstructure and high mechanical strength of the macroporous ceramics can be of interest for the manufacture of bio-scaffolds, thermal insulators, impact absorbers, separation membranes, and light weight ceramics.     

Reverse osmosis in the desalination of brackish water and sea water

To make RO an economical process, plant and operating costs have been reduced by developing compact modules, led by polyamide hollow fibre modules which recover energy from the reject when desalinating highly saline brackish water and seawater. Such plants only start to pay their way at product rates of around 400m³ /d +. Energy costs for desalination systems with lower capacities can also be reduced considerably by operating the RO plants at conversion rates of more than 30%. To what extent the required higher conversion rates can be obtained for a particular application depends on concentration of scales-forming content matter (calcium sulphate, strontium sulphate, barium sulphate and calcium carbonate), salt content of the raw water, concentration of fouling substances such as iron, manganese, anorganic and organic matter, risk of biological growth due to algae, shells and bacteria. The scope and type of conditioning and pre-treatment are based on these factors.     

Measuring Cognitive Load Using Linguistic Features: Implications for Usability Evaluation and Adaptive Interaction Design

An intelligent adaptable system, aware of a user’s experienced cognitive load, may help improve performance in complex, time-critical situations by dynamically deploying more appropriate output strategies to reduce cognitive load. However, measuring a user’s cognitive load robustly, in real-time is not a trivial task. Many research studies have attempted to assess users’ cognitive load using different measurements, but these are often unsuitable for deployment in real-life applications due to high intrusiveness. Relatively novel linguistic behavioral features as potential indices of user’s cognitive load is proposed. These features may be collected implicitly and nonintrusively supporting real-time assessment of users’ cognitive load and accordingly allowing adaptive usability evaluation and interaction. Results from a laboratory experiment show significantly different linguistic patterns under different task complexities and cognitive load levels. Implications of the research for adaptive interaction are also discussed, that is, how the cognitive load measurement-based approach could be used for user interface evaluation and interaction design improvement.     

Influence of the preparation conditions on the properties of gold catalysts for the oxidation of glucose

In this work, two deposition–precipitation methods for the preparation of gold catalysts for glucose oxidation were investigated. Thus far, gold colloids immobilized on carbon have been used for catalytic glucose oxidation, but the long-term stability of these systems was not sufficient. To improve the long-term stability we used the deposition–precipitation methods using NaOH (DP NaOH) or urea (DP urea) as precipitation agents as they were described by Haruta and Dekkers, respectively, using alumina as a support material. With these methods, it was possible to prepare highly active and selective catalysts which showed an excellent long-term stability. DP urea was found to be the preferred method, because in contrast to DP NaOH, no losses of gold occurred during the preparation, and it was possible to adjust various gold contents up to 10 wt% Au.     

Effect of Ionic Substitution on the Thermal Expansion of ZrTiO4

New oxide compounds with α-PbO₂ structure have been synthesized by solid-state reactions. These are derived from ZrTiO₄ and HfTiO₄ by a different kind of ionic substitution. The thermal expansion behavior of these phases was investigated by means of a dilatometer and an X-ray heating diffractometer. These measurements revealed rather low expansion for some of the Zr(Me³⁺/Me⁵⁺)O₄, solid solutions. This behavior is attributed to their high expansion anisotropy, which leads to extended formation of microcracks.     

Detection and evaluation of the fibers' deposition parameters during wet filament winding

Wet filament winding technology has been extensively used for the manufacture of rotationally symmetric parts made of fiber-reinforced plastics (FRP). As the design and modeling of FRP-parts require numerous assumptions, deviations between calculated and achieved mechanical properties are expected. One aspect that contributes to this discrepancy is the assumption of a homogeneous rectangular cross-section of the fiber-band. In this work, the fiber-band geometry in a wet-winding process of carbon fiber cylinders is analyzed. An Infrared-optical system for the detection of the fiber bandwidth and winding-angle is implemented. The influence of the winding speed and the resin temperature is analyzed. An image processing algorithm for the automatic measurement of the fiber's bandwidth and winding-angle is developed. Manual and adaptive gamma corrections are implemented to improve image quality. A parameter study for the suitable selection of image processing parameters is performed.     

Design of microfluidic channels for magnetic separation of malaria-infected red blood cells

This study is motivated by the development of a blood cell filtration device for removal of malaria-infected, parasitized red blood cells (pRBCs). The blood was modeled as a multi-component fluid using the computational fluid dynamics discrete element method (CFD-DEM), wherein plasma was treated as a Newtonian fluid and the red blood cells (RBCs) were modeled as soft-sphere solid particles which move under the influence of drag, collisions with other RBCs, and a magnetic force. The CFD-DEM model was first validated by a comparison with experimental data from Han and Frazier (Lab Chip 6:265–273, 2006) involving a microfluidic magnetophoretic separator for paramagnetic deoxygenated blood cells. The computational model was then applied to a parametric study of a parallel-plate separator having hematocrit of 40 % with 10 % of the RBCs as pRBCs. Specifically, we investigated the hypothesis of introducing an upstream constriction to the channel to divert the magnetic cells within the near-wall layer where the magnetic force is greatest. Simulations compared the efficacy of various geometries upon the stratification efficiency of the pRBCs. For a channel with nominal height of 100 µm, the addition of an upstream constriction of 80 % improved the proportion of pRBCs retained adjacent to the magnetic wall (separation efficiency) by almost twofold, from 26 to 49 %. Further addition of a downstream diffuser reduced remixing and hence improved separation efficiency to 72 %. The constriction introduced a greater pressure drop (from 17 to 495 Pa), which should be considered when scaling up this design for a clinical-sized system. Overall, the advantages of this design include its ability to accommodate physiological hematocrit and high throughput, which is critical for clinical implementation as a blood-filtration system.