Comparative effects of gamma and microwave irradiation on the quality of black pepper

Powdered black pepper from Egyptian markets, was irradiated with different recommended doses of gamma rays (5.0 and 10.0 kGy) and with microwaves for different periods (20, 40 and 75 s) to improve its hygienic quality. The most common bacterial isolates were of three generaBacillus, Clostridium andMicrococcus (7.5 × 10⁶), whereas the predominant fungi (7.8 × 10⁴) wereAspergillus species,A. glaucus, A. flavus, A. niger andA. ochraceus. Doses of gamma irradiation used (5.0 and 10 kGy) were sufficient to decrease spore-forming bacteria (SFB) and to inhibit the fungal flora and coliforms which contaminated the black pepper powder. Microwave treatments for 40 s and 75 s were of the same effectiveness whereas treatment for 20 s was less so. GLC analysis proved the presence of 31 peaks, only 19 compounds were identified as monoterpene hydrocarbons (56.21%), the major one being -phellandrene and limonene. Sesquiterpenes were also present, mainly -caryollphyllene (3.69%) as well as oxygenated compounds such as terpenol, geraniol, Me-chavicol, eugenol and anisol. Gamma irradiation at 5 kGy and 10 kGy respectively decreased the numbers of identified compounds from 21 (86.58% concentration) in untreated pepper to 16 (59.22% concentration), 15 (54.06% concentration). In comparison, microwave treatments, particularly for 40 s and 75 s, increased the concentration of the same compounds. The results obtained indicate that microwave treatment, under these conditions, is a safe and suitable technique for decontamination of black pepper which does not result in a great loss of flavour compounds, as compared with recommended doses of gamma irradiation.     

Effective participation of wind turbines in frequency control of a two-area power system using coot optimization

In this paper, load frequency control is performed for a two-area power system incorporating a high penetration of renewable energy sources. A droop controller for a type 3 wind turbine is used to extract the stored kinetic energy from the rotating masses during sudden load disturbances. An auxiliary storage controller is applied to achieve effective frequency response. The coot optimization algorithm (COA) is applied to allocate the optimum parameters of the fractional-order proportional integral derivative (FOPID), droop and auxiliary storage controllers. The fitness function is represented by the summation of integral square deviations in tie line power, and Areas 1 and 2 frequency errors. The robustness of the COA is proven by comparing the results with benchmarked optimizers including: atomic orbital search, honey badger algorithm, water cycle algorithm and particle swarm optimization. Performance assessment is confirmed in the following four scenarios: (i) optimization while including PID controllers; (ii) optimization while including FOPID controllers; (iii) validation of COA results under various load disturbances; and (iv) validation of the proposed controllers under varying weather conditions.     

Evidence for Glass–glass Interfaces in a Columnar Cu–Zr Nanoglass

Comprehensive analyses of the atomic structure using advanced analytical transmission electron microscopy-based methods combined with atom probe tomography confirm the presence of distinct glass–glass interfaces in a columnar Cu-Zr nanoglass synthesized by magnetron sputtering. These analyses provide first-time in-depth characterization of sputtered film nanoglasses and indicate that glass–glass interfaces indeed present an amorphous phase with reduced mass density as compared to the neighboring amorphous regions. Moreover, dedicated analyses of the diffusion kinetics by time-of-flight secondary ion mass spectroscopy (ToF SIMS) prove significantly enhanced diffusivity, suggesting fast transport along the low density glass–glass interfaces. The present results further indicate that sputter deposition is a feasible technique for reliable production of nanoglasses and that some of the concepts proposed for this new class of glassy materials are applicable.     

Design and development of dynamic Agri-ontology for IoT interoperability

In recent years, the usage and applications of Internet of Things (IoT) have increased exponentially. IoT connects multiple heterogeneous devices like sensors, micro controllers, actuators, smart devices like mobiles, watches, etc. IoT contributes the data produced in the context of data collection, including the domains like military, agriculture, healthcare, etc. The diversity of possible applications at the intersection of the IoT and the web semantics has prompted many research teams to work at the interface between these two disciplines. This makes it possible to collect data and control various objects in transparent way. The challenge lies in the use of this data. Ontologies address this challenge to meet specific data needs in the IoT field. This paper presents the implementation of a dynamic agriculture ontology-building tool that parses the ontology files to extract full data and update it based on the user needs. The technology is used to create the angular library for parsing the OWL files. The proposed ontology framework would accept user-defined ontologies and provide an interface for an online updating of the owl files to ensure the interoperability in the agriculture IoT.     

Maximum Power Extraction Control Algorithm for Hybrid Renewable Energy System

In this research, a modified fractional order proportional integral derivate (FOPID) control method is proposed for the photovoltaic (PV) and thermoelectric generator (TEG) combined hybrid renewable energy system. The faster tracking and steady-state output are aimed at the suggested maximum power point tracking (MPPT) control technique. The derivative order number (µ) value in the improved FOPID (also known as PI^λD^µ) control structure will be dynamically updated utilizing the value of change in PV array voltage output. During the transient, the value of µ is changeable; it’s one at the start and after reaching the maximum power point (MPP), allowing for strong tracking characteristics. TEG will use the freely available waste thermal energy created surrounding the PV array for additional power generation, increasing the system’s energy conversion efficiency. A high-gain DC-DC converter circuit is included in the system to maintain a high amplitude DC input voltage to the inverter circuit. The proposed approach’s performance was investigated using an extensive MATLAB software simulation and validated by comparing findings with the perturbation and observation (P&O) type MPPT control method. The study results demonstrate that the FOPID controller-based MPPT control outperforms the P&O method in harvesting the maximum power achievable from the PV-TEG hybrid source. There is also a better control action and a faster response.     

Optimal Deep Learning Based Intruder Identification in Industrial Internet of Things Environment

With the increased advancements of smart industries, cybersecurity has become a vital growth factor in the success of industrial transformation. The Industrial Internet of Things (IIoT) or Industry 4.0 has revolutionized the concepts of manufacturing and production altogether. In industry 4.0, powerful Intrusion Detection Systems (IDS) play a significant role in ensuring network security. Though various intrusion detection techniques have been developed so far, it is challenging to protect the intricate data of networks. This is because conventional Machine Learning (ML) approaches are inadequate and insufficient to address the demands of dynamic IIoT networks. Further, the existing Deep Learning (DL) can be employed to identify anonymous intrusions. Therefore, the current study proposes a Hunger Games Search Optimization with Deep Learning-Driven Intrusion Detection (HGSODL-ID) model for the IIoT environment. The presented HGSODL-ID model exploits the linear normalization approach to transform the input data into a useful format. The HGSO algorithm is employed for Feature Selection (HGSO-FS) to reduce the curse of dimensionality. Moreover, Sparrow Search Optimization (SSO) is utilized with a Graph Convolutional Network (GCN) to classify and identify intrusions in the network. Finally, the SSO technique is exploited to fine-tune the hyper-parameters involved in the GCN model. The proposed HGSODL-ID model was experimentally validated using a benchmark dataset, and the results confirmed the superiority of the proposed HGSODL-ID method over recent approaches.     

Feature Selection for Detecting ICMPv6-Based DDoS Attacks Using Binary Flower Pollination Algorithm

Internet Protocol version 6 (IPv6) is the latest version of IP that goal to host 3.4 × 10³⁸ unique IP addresses of devices in the network. IPv6 has introduced new features like Neighbour Discovery Protocol (NDP) and Address Auto-configuration Scheme. IPv6 needed several protocols like the Address Auto-configuration Scheme and Internet Control Message Protocol (ICMPv6). IPv6 is vulnerable to numerous attacks like Denial of Service (DoS) and Distributed Denial of Service (DDoS) which is one of the most dangerous attacks executed through ICMPv6 messages that impose security and financial implications. Therefore, an Intrusion Detection System (IDS) is a monitoring system of the security of a network that detects suspicious activities and deals with a massive amount of data comprised of repetitive and inappropriate features which affect the detection rate. A feature selection (FS) technique helps to reduce the computation time and complexity by selecting the optimum subset of features. This paper proposes a method for detecting DDoS flooding attacks (FA) based on ICMPv6 messages using a Binary Flower Pollination Algorithm (BFPA-FA). The proposed method (BFPA-FA) employs FS technology with a support vector machine (SVM) to identify the most relevant, influential features. Moreover, The ICMPv6-DDoS dataset was used to demonstrate the effectiveness of the proposed method through different attack scenarios. The results show that the proposed method BFPA-FA achieved the best accuracy rate (97.96%) for the ICMPv6 DDoS detection with a reduced number of features (9) to half the total (19) features. The proven proposed method BFPA-FA is effective in the ICMPv6 DDoS attacks via IDS.     

Pseudo-T2 mapping for normalization of T2-weighted prostate MRI

Magnetic Resonance Materials in Physics, Biology and Medicine - Signal intensity normalization is necessary to reduce heterogeneity in T2-weighted (T2W) magnetic resonance imaging (MRI) for...     

Home Automation Using Augmented Reality (HAAR)

Wireless Personal Communications - The development of Smart Home Controllers has seen rapid growth in recent years, especially for smart devices, that can utilize the Internet of Things (IoT)....     

A New Adaptive Beamforming of Multiband Fractal Antenna Array in Strong-Jamming Environment

This paper proposes, for the first time, a new radiation pattern synthesis for fractal antenna array that combines the unique multi-band characteristics of fractal arrays with the adaptive beamforming requirements in wireless environment with high-jamming power. In this work, a new adaptive beamforming method based on discrete cbKalman filter is proposed for linear Cantor fractal array with high performance and low computational requirements. The proposed Kalman filter-based beamformer is compared with the Least Mean Squares (LMS) and the Recursive Least Squares (RLS) techniques under various parameter regimes, and the results reveal the superior performance of the proposed approach in terms of beamforming stability, Half-Power Beam Width (HPBW), maximum Side-Lobe Level (SLL), null depth at the direction of interference signals, and convergence rate for different Signal to Interference (SIR) values. Also, the results demonstrate that the suggested approach not only achieves perfect adaptation of the radiation pattern synthesis at high jamming power, but also keep the same SLL at different operating frequencies. This shows the usefulness of the proposed approach in multi-band smart antenna technology for mobile communications and other wireless systems.