Predicting nitrogen leaching with the modified LEACHM model: validation in soils receiving long-term application of animal manure composts

A variety of process-based models have been developed for predicting nitrogen (N) dynamics in agro-ecosystem; however, no reliable models have been validated for N leaching from soils receiving a long-term application of different types of animal manure composts. The Leaching Estimation and Chemistry Model (LEACHM) was recently modified by incorporating the basic structure of Rothamsted Carbon Model for extending its ability to describe soil organic matter decomposition and subsequent N leaching in soils rich in organic matter. We evaluate the applicability of the modified LEACHM in cropped Yellow soils receiving 10-year application of cattle or swine manure compost in addition to chemical fertilizers, where high-frequency field monitoring data of soil water contents, soil N contents and leachate N concentrations were available for the last 3 years. Particular attention was paid to determine all input parameters from independent measurements, parameterization from known soil properties or databases without optimisation to fit the measured field data. The model reasonably predicted temporal changes in the soil NH₄-N and NO₃-N contents, and inorganic N concentrations in the leachate as well as their differences due to different manure compost/chemical fertilizer applications. The simulations of leached N concentration yielded a Willmott index of agreement (IA) of 0.62–0.68, with those for soil moisture, soil nitrate content and crop N uptake all within an acceptable IA range. In view of the good performance without site-specific calibrations, the modified LEACHM appears to be a valuable tool for predicting N leaching from cropped soils receiving long-term manure compost applications.     

Emission of Particulate Matter 2.5 (PM2.5) from Sewage Sludge Incinerators in Japan

Because fine particulate matter ≤2.5 µm in diameter (PM2.5) causes health problems, PM2.5 emissions are of concern. However, little research on stationary sources has been conducted. To determine the concentration and filtration behavior of PM2.5, dust was collected from five fluid-bed sewage sludge incinerators (SSIs) sorted by particle size using cascade impactors. The average PM2.5 concentration was 0.00014–4.8 mg/Nm³. The total estimated amount of PM2.5 emissions from the SSIs for all plants in Japan was 0.96–8.9 tons/year. Since the SSIs with dry Electrostatic Precipitators (EP) contributed 75–99% of the total emissions, replacing dry EPs with bag filters would significantly reduce the PM2.5 emissions from SSI.     

Curing of epoxy resin by ultrafine silica modified by grafting of hyperbranched polyamidoamine using dendrimer synthesis methodology

Hyperbranched polyamidoamine–grafted silica was prepared according to dendrimer synthesis methodology. The modified silica was dispersed uniformly in epoxy resin, and the curing of epoxy resin proceeded successfully by heating in the presence of the modified silica; the gel fraction of the epoxy resin cured by the hyperbranched polyamidoamine–grafted silica (grafting = 80.2%) reached 77% at 170°C after 48 h. The gel fraction increased with increasing terminal amino group content of the hyperbranched polyamidoamine–grafted silica. In addition, the curing ability of the silica increased by complexation of the terminal amino groups of the grafted polyamidoamine with boron trifluoride. The modulus of elasticity of the curing materials obtained using the modified silica as a curing agent was lower than that using conventional a curing agent such as ethylenediamine in the presence of untreated silica. On the other hand, the heat resistance of the curing product using the modified silica was superior to that using ethylenediamine, but no difference in glass‐transition temperature was observed. It is expected that hyperbranched polyamidoamine grafted‐silica is incorporated uniformly with chemical bonds in the matrix of the epoxy resin. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 573–579, 2001     

Synthesis of polyamides from sugar derived d-glucaric acid and xylylenediamines

d -Glucaric acid (GA) is the one of aldaric acids and is an important bio-based building block for polymers. In this study, poly(m-xylylene-acetyl glucaramide) and poly(p-xylylene-acetyl glucaramide) were synthesized from GA acetate and two kind of aromatic diamines by solution polymerization. The chemical structures of the polyamides were analyzed by nuclear magnetic resonance spectroscopy. The weight-average molecular weights ranged from 3.3 × 10³ to 1.15 × 10⁴ with a polydispersity of 1.6–1.9, depending on monomer ratio or monomer concentration in solution. The 10% decomposition temperature of the polymers was about 210 °C. Differential scanning calorimetry revealed that the polyamides exhibited no peaks attributed to crystallization or melting point, which indicated that the polyamides were amorphous. No crystalline pattern was observed in the X-ray diffractograms, supporting this result. Polarized optical microscopy observation revealed that the polyamides exhibited melting-like behavior at above 150 °C, which was attributed to glass-transition behavior. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47255.     

On the onset of fracture as a silicon-based polymer converts into the ceramic phase

Silicon-based polymers evolve into refractory ceramics when heated gradually up to ~1000°C. The conversion is accompanied by the loss of gaseous species, and by a two-fold increase in density. The shrinkage can produce microcracks if the heating rate is too high, or if the specimen is too thick. This communication builds on earlier work whereby the measurement of gas evolution, and its relationship with viscous flow, are related to the onset of fracture in disk-shaped green (polymer) samples. The onset is determined as a function of the thickness of the disks, and of the heating rate. The results are presented in the form of a processing map. The overlay with gas evolution, and strain-rate measurements, suggest that fracture initiates with the release of hydrogen and methane, starting at temperatures near 750°C.     

晶粒尺寸对（TiB2＋TiC）/Ni3Al复合材料循环氧化性能的影响（英文）

采用放电等离子烧结法制备（TiB2＋TiC）/Ni3Al复合材料。在950°C下烧结的（TiB2＋TiC）/Ni3Al复合材料的组织比在1050°C下烧结的（TiB2＋TiC）/Ni3Al复合材料的组织更细小。对烧结温度分别为950°C和1050°C的复合材料在900°C下进行循环氧化性能测试。结果表明,在950°C下烧结的复合材料的循环氧化质量损失要小于在1050°C下烧结的复合材料的。晶粒细化有助于在氧化过程汇总的选择性氧化,使得连续的TiO2和Al2O3氧化膜得以在复合材料表面形成,从而提高复合材料的抗氧化性能。     

Low-Temperature Magnetotransport and Magnetic Properties of Cobalt-Doped Amorphous Carbon Thin Films

采用磁控共溅射方法在n型Si(100)基片上制备了一系列具有不同Co含量(x,at％)的Co掺杂非晶C颗粒薄膜,溅射温度为室温.研究了Co-C颗粒薄膜的微结构,磁输运特性及磁性能.通过优化Co含量,在低温下发现了较大的负磁电阻(MR).温度为2K、磁场为90×79.6 kA.ml时,Co含量为6.4 at％的Co-C薄膜的负磁电阻值最大,达到27.6％.随着Co含量从6.4 at％增加至16.4 at％,MR 值从27.6％逐渐减小至2.2％.电阻率ρ随温度T的变化曲线显示了线性的lnρ-T1/2关系,说明样品中电子传导遵循隧穿输运机制.     

Porous Titania Ceramic Prepared by Mimicking Silicified Wood

A porous titania ceramic with a woodlike microstructure that was analogous to silicified wood was prepared. The production of "titanified wood" was performed using the following process: (i) introduction of titanium tetraisopropoxide into wood materials via vacuum infiltration, (ii) hydrolysis of the titanium tetraisopropoxide in the cell structure to form a titania gel, and (iii) firing at a temperature of 600°–1400°C in air. The resulting titania ceramic had the same external and internal forms of the original wood.     

Molecular simulation for adsorption of chlorinated hydrocarbon in zeolites

Equilibrium and isosteric heat of adsorption for the system of chloroform and USY-type zeolite were studied. The USY-type zeolite (PQ Co., SiO₂/Al₂O₃=70) was used both as a pure crystalline powder and as granulated particles with binder. Chloroform was reagent grade. The adsorption equilibria were measured using a gravimetric method and were expressed as isotherms. A chromatographic method (i.e. pulse response of chloroform through the USY column with helium carrier) was used to get the initial slope of the isotherms. In the simulation, the GCMC method was used to calculate amounts adsorbed for various conditions. FF parameters were confidently applied. And modified structure model was effective for simulation. This paper was presented at The 5th International Symposium on Separation Technology-Korea and Japan held at Seoul between August 19 and 21, 1999.     

Hyperbranched poly(arylene ether phosphine oxide)s

Summary New AB₂ and A₂B monomers, bis(4-fluorophenyl)-4'-hydroxyphenylphosphine oxide and bis(4-hydroxyphenyl)-4'-fluorophenyl-phosphine oxide were prepared and converted to corresponding hyperbranched poly(arylene ether phosphineoxide)s with hydroxyphenyl and fluorophenyl end functional groups. While the dihydroxy monomer gave a low molecular weight polymer, the difluoro monomer produced a high molecular weight hyperbranched polymer. The glass transition temperature of the obtained polymers was 266°C and 230°C, and 5% weight loss temperature was 491 °C and 391 °C, respectively. The fluorophenyl-terminated hyperbranched polymer was soluble in CHCl₃, but the hydroxyphenyl-terminated polymer was not soluble in CHCl3 even though it has lower molecular weight than the fluorophenyl-terminated polymer, indicating that properties of the hyperbranched polymers markedly depend on end functional groups as well as their molecular weight. Received: 23 August 2000/Revised version: 19 October 2000/Accepted: 31 October 2000