Thin film composite sodium alginate membranes for dehydration of acetic acid and isobutanol

Dehydration of widely used organic solvents such as acetic acid (AA) and isobutanol (IB) is challenging tasks, which form close boiling mixtures with water. Sodium alginate (SA) thin film composite membranes were prepared and crosslinked with 2,4‐toluene diisocyanate (TDI) and glutaraldehyde for dehydration of IB and AA/water mixtures through pervaporation (PV). The crosslinked and uncrosslinked SA composite membranes were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, and universal testing machine for intermolecular interactions, crystalline nature, thermal stability, surface morphology, and tensile strength, respectively. At a feed composition of 98 wt % IB and 95 wt % AA aqueous solutions, the TDI crosslinked SA composite membrane exhibited separation factors of 3229 and 708 with reasonable fluxes of 0.021 and 0.012 kg m^?2 h^?1, respectively. The results obtained in the study for IB and AA systems were compared with other SA membranes reported in the literature. The membranes appeared to have potential for commercial PV ability to dehydrate the solvents up to desirable purity levels (>99%) and feasibility of preparing them in a composite form which would enable scale‐up into modular configurations. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40018.     

Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

Phenotypic identification and technological properties of lactic acid bacteria isolated from traditionally processed fish products of the Eastern Himalayas

Sukako maacha, gnuchi, sidra and sukuti are traditional smoked and sun-dried fish products of the Eastern Himalayan regions of Nepal and India. A total of 40 samples of sukako maacha (14), gnuchi (6), sidra (10) and sukuti (10) were collected and were analysed for microbial load. Population of lactic acid bacteria (LAB) as well as aerobic mesophilic counts ranged from 4.7-8.3 to 5.1-8.5 log cfu g(-1), respectively. A total of 189 strains of LAB were isolated from sukako maacha, gnuchi, sidra and sukuti samples, out of which 171 strains were cocci and 15 strains, were heterofermentative lactobacilli. LAB were identified on the basis of phenotypic characters including API system as Lactococcus lactis subsp. cremoris, Lactococcus lactis subsp. lactis, Lactococcus plantarum, Leuconostoc mesenteroides, Enterococcus faecium, Enterococcus faecalis, Pediococcus pentosaceus and Weissella confusa. LAB strains produced a wide spectrum of enzymes. Some strains of LAB showed antagonistic properties against pathogenic strains. None of the strains produced biogenic amines in the method applied. This paper is the first report on the microbial composition, mostly lactic acid bacteria, of traditionally processed fish products of Eastern Himalayas.     

Properties of laboratory made yellow poplar (Liriodendron tulipifera) laminated veneer lumber: effect of the adhesives

Four different commercial resin formulations namely cross-linked polyvinyl acetate (XPVAc), melamine urea formaldehyde (MUF), urea formaldehyde (UF) and melamine formaldehyde (MF) were used to produce laminated veneer lumber (LVL) from yellow poplar veneers in the laboratory. Physical and mechanical properties were evaluated using ASTM (D 1037, D 906, D 5456) standards and compared. Internal bond, tensile shear and block shear strengths of specimens subjected to accelerated (boiled water) and cyclic (repeated cold water) conditions were also determined. Strength properties of yellow poplar LVL were improved compared with the solid wood. The properties of XPVAc bonded LVL were superior or comparable to the thermosetting adhesives. This study clearly indicated that cross-linked PVAc can be used to manufacture LVL with acceptable properties.     

Binder Evolution from Powder Compacts: Thermal Profile for Injection-Molded Articles

Binder evolution information generated using thermal analysis techniques is used along with microstructural information to define a thermal cycle for debinderizing injection-molded articles. In addition, the roles of binder chemistry, powder morphology, binder loading, article size, heating rate, and environmental conditions in determining a satisfactory thermal cycle are investigated. Major binder evolution events and types of defects generated are identified. An improved binder removal cycle is developed from this evaluation for organics elimination of a honeycomb structure.     

Effect of morphology on the performance of metal-hydride electrodes

Electrochemical studies on AB₂ type Zr_0.5Ti_0.5V_0.6Cr_0.2Ni_1.2 metal hydride electrodes with varying particle size suggests that the electrodes with alloy particles of about 60 m yield the optimum performance. The values for diffusion coefficient of hydrogen in the alloy particles > 25 m are found to be nearly invariant. Both a.c. impedance and linear polarization data on electrodes with varying particle size suggest that the charge-transfer resistance depends on state-of-charge of the electrodes. A comparison of scanning electron micrographs of fresh electrodes and subsequent to their prolonged charge-discharge cycling suggests that the metal hydride particles develop stress-induced cracks owing to their inherent expansion and contraction during the hydriding/dehydriding processes.     

An Experimental Study on the Additional Settlement of Footings Resting on Granular Soils by Water Table Rise

When the water table rises in a granular soil mass, a large additional settlement of footing resting on such a soil mass is commonly expected. Laboratory model tests show that when the water table rises to the footing level, there can be an additional 400 to 500% of the settlements compared to when the soil is dry. To understand the mechanics of the additional settlements of footings resting on the granular soil masses caused by water table rise, an investigation into the change in the Young's modulus of soil was therefore made using oedometer tests. A relation between the saturated and the dry Young's moduli of the granular soils is presented for use in the elastic analysis of footing settlements. The findings of the investigation were then used to predict the additional settlements of a model footing when subjected to a water table rise, using elastic analysis. The theoretical predictions of the additional settlements are lower than the actual additional settlements observed in the settlement tests conducted in the laboratory using model tests. The model tests show that the additional settlements are larger in loose sands than in dense sands.     

Hydrogen delivery through liquid organic hydrides: Considerations for a potential technology

Carrying hydrogen in chemically bounded form as cycloalkanes and recovery of hydrogen via a subsequent dehydrogenation reaction is a potential option for hydrogen transport and delivery. We have earlier reported a novel method for transportation and delivery of hydrogen through liquid organic hydrides (LOH) such as cycloalkanes. The candidate cycloalkanes including cyclohexane, methylcyclohexane, decalin etc. contains 6 to 8 wt% hydrogen with volume basis capacity of hydrogen storage of 60–62 kg/m³. In view of several advantages of the system such as transportation by present infrastructure of lorries, no specific temperature pressure requirement and recyclable reactants/products, the LOH definitely pose for a potential technology for hydrogen delivery. A considerable development is reported in this field regarding various aspects of the catalytic dehydrogenation of the cycloalkanes for activity, selectivity and stability. We have earlier reported an account of development in chemical hydrides. This article reports a state-of-art in LOH as hydrogen carrier related to dehydrogenation catalysts, supports, reactors, kinetics, thermodynamic aspects, potential demand of technology in field, patent literature etc.     

Identification and tackling of a parasitic surface compound in SiC and Si-rich carbide films

Silicon carbide and silicon rich carbide (SiC and SRC) thin films were prepared by PECVD and annealed at 1100 °C. Such a treatment, when applied to SiC/SRC multilayers, aimed at the formation of silicon nanocrystals, that have attracted considerable attention as tunable band-gap materials for photovoltaic applications. Optical and structural techniques (X-ray photoelectron spectroscopy, Reflectance and Transmittance, Fourier Transformed Infrared Spectroscopy) were used to evidence the formation, during the annealing treatment in nominally inert atmosphere, of a parasitic ternary SiO_xC_y surface compound, that consumed part of the originally deposited material and behaved as a preferential conductive path with respect to the nanocrystal layer in horizontal electrical conductivity measurements. The SiO_xC_y compound was HF-resistant, with composition dependent on the underlying matrix. It gave rise to a Si-O related vibration in FTIR analysis, that may be misinterpreted as due to silicon oxide. The compound, if neglected, can affect the structural and electrical characterization of the material.To overcome this problem, a procedure is analyzed, based on the deposition of a sacrificial capping a-Si:H layer that partially oxidizes, and is removed by tetra methyl ammonium hydroxide (TMAH) after annealing. XPS analysis revealed that the resulting surface is mainly made up of SiC regardless of the composition of the underlying SRC layer. Subsequent SF₆:O₂ dry etching results in a porous SiC-rich surface layer. The proposed method is effective in controlling the SRC surface configuration, and allows the performance of reliable optical and electrical characterization.     

Study of pyro-carbon coated alumina kernel using mixed contrast transfer based X-ray phase retrieval technique

We have used the contrast transfer function based X-ray phase retrieval technique for phase retrieval studies on a two-component system. Pyro-carbon coated alumina matrix was chosen as a two-component system for these studies. Simulations as well as experimental results are presented. This paper shows that X-ray phase contrast along with phase retrieval can become an alternative tool for non-destructive characterization of these materials. We have also attempted to retrieve the spatial distribution of the projected thickness map of the two different elements.