Mass transfer in polycrystalline ytterbium monosilicate under oxygen potential gradients at high temperatures

Mass transfer in polycrystalline Yb₂SiO₅ wafers with precise composition control was evaluated and analyzed by oxygen permeation experiments at high temperatures using an oxygen tracer. Oxygen permeation proceeded due to mutual grain boundary diffusion of oxide ions and Yb ions without synergistic effects such as acceleration or suppression. The oxygen shielding properties of Yb₂SiO₅ were compared with those of the other line compounds such as Yb₂Si₂O₇ and Al₂O₃ based on the determined mass transfer parameters. It was found that the more preferentially an oxide ion diffuses in the grain boundary compared to the interior of the grain, the greater the effect of suppressing the movement of the oxide ion by applying an oxygen potential gradient becomes.     

Effect of in-flight particle behavior on the morphology of flame sprayed Er2O3 splats

The morphology and microstructure of splats impact the comprehensive capability of a new coating methodology called chelate flame spraying (CFS). This study addresses the quantitative characterization of the spread morphologies of flame sprayed Er₂O₃ splats directly deposited under different spray conditions on aluminum alloy substrates with a mirror finish. The influence of the in-flight particle temperature and velocity, carrier gas type, and carrier gas ratio on the solidification mechanism of molten droplets was investigated. Image analysis methods were employed to identify single splats from the morphology observed with field-emission scanning electron microscopy (FE-SEM). In addition, Er₂O₃ films were synthesized on an Al–Mg alloy (A5052) substrate using N₂ or O₂ as the carrier gas. When O₂ was used as the carrier gas, 109-μm-thick films were deposited on the A5052 substrate. The cross-sectional porosity of the films was 3.8%. In contrast, films with 101-μm thickness were synthesized on the A5052 substrate when N₂ was used as the carrier gas. The cross-sectional porosity of these films was 13.8%. The results showed that the carrier gas type (N₂) and carrier gas ratio had a significant effect on the flattening behavior of the molten droplets. A spraying method combined with multidimensional modes is proposed to control the morphology of the splats.     

Resistance to aerobic deterioration of total mixed ration silage: effect of ration formulation,air infiltration and storage period on fermentation characteristics and aerobic stability

BACKGROUND: High aerobic stability can be expected when wet brewers' grains are stored as a total mixed ration (TMR) silage. To understand the factors affecting the stability, the effects of ration formulation, air infiltration and storage period were studied. RESULTS: A TMR containing wet brewers' grains, hay, maize, wheat bran, beet pulp and molasses was ensiled in laboratory silos for 14 and 56 days. The effects of hay species (lucerne or sudangrass) and air infiltration (Exp. 1) and of excluding one, two or three items from the six ingredients (Exp. 2) were examined. Ethanol was the main fermentation product in all TMR silages in this study. Aerobic deterioration occurred in 14 day silages prepared with sudangrass hay along with air infiltration (Exp. 1), and with the simplest recipe where three items (hay, maize and wheat bran) were excluded (Exp. 2). No deterioration occurred in 56 day silages regardless of ration formulation and air infiltration. Yeasts receded in 56 day silages, except with the simplest recipe, to the 10² cfu g^?1 level and remained undetectable in the presence of air (Exp. 2). CONCLUSION: TMR silage can resist aerobic deterioration provided that a sufficient ensiling period has elapsed. Silages stored for only a few weeks may be susceptible to deterioration when air is infiltrated or where fewer ingredients are used in the TMR mixture. Copyright © 2007 Society of Chemical Industry     

An ultra-fast fabrication technique for anode support solid oxide fuel cells by microwave

An effective and facile technique has been developed for high temperature anode-electrolyte co-sintering of anode support solid oxide fuel cells by using microwave activated sparking plasma. A high sintering temperature of 1600 °C can be achieved in a few minutes time by discharging effect. Anode support substrate pellet is uniaxially pressed, and then dip-coated with a 10 μm yttria stabilized zirconia electrolyte layer. After the microwave co-sintering, La_0.8Sr_0.2MnO_x cathode is screen-printed onto electrolyte and sintered by conventional thermal method. The cell has stably operated in 3% humidified hydrogen for more than 130 h.     

Preparation and electrocatalytic activity of palladium-platinum core-shell nanoalloys protected by a perfluorinated sulfonic acid ionomer

Palladium-platinum nanoalloys with a core-shell and nano-network structure were successfully synthesized by a hydrogen sacrificial protective method in an aqueous solution directly using a perfluorinated sulfonic acid (PFSA) ionomer as a protecting agent. The structure, local composition and electrocatalytic activity for the oxygen reduction reaction of the Pd/Pt/PFSA nanoalloys were investigated by transmission electron microscopy (TEM), aberration corrected scanning transmission electron microscopy (Cs-STEM), energy-dispersive X-ray spectrometry (EDS) and voltammetry. The core-shell structure was completed without contaminating reducing agents, organic solvents, useless protecting agents and a mediator. The Pd/Pt/PFSA core-shell nanoalloys realized a high electrochemical surface area and better electrocatalytic mass-activity for the oxygen reduction reaction than the Pt/PFSA nanoparticles.     

Bulk heterojunction organic solar cells utilizing 1,4,8,11,15,18,22,25-octahexylphthalocyanine

Bulk heterojunction solar cells utilizing soluble phthalocyanine derivative, 1,4,8,11,15,18,22,25-octahexylphthalocyanine (C6PcH₂) have been investigated. The active layer was fabricated by spin-coating the mixed solution of C6PcH₂ and 1-(3-methoxy-carbonyl)-propyl-1-1-phenyl-(6,6)C61 (PCBM). The photovoltaic properties of the solar cell with bulk heterojunction of C6PcH₂ and PCBM demonstrated the strong dependence of active layer thickness, and the optimized active layer thickness was clarified to be 120 nm. By inserting MoO₃ hole transport buffer layer between the positive electrode and active layer, the FF and energy conversion efficiency were improved to be 0.50 and 3.2%, respectively. The tandem organic thin-film solar cell has also been studied by utilizing active layer materials of C6PcH₂ and poly(3-hexylthiophene) and the interlayer of LiF/Al/MoO₃ structure, and a high V_oc of 1.27 V has been achieved.     

Experimental study of impingement cooling by heat sinks with thin longitudinal fins for LSI packages

This paper reports on the impingement cooling characteristics of a heat sink with thin longitudinal fins of 0.2 mm thickness, which are spaced with a fin-pitch in the range 0.5 mm to 2.0 mm. The air cooling of the heat sink comes from a slot-shaped orifice positioned above the heat-sink center. The breadth of the gap between the fin tops and the inlet orifice is in the range 0 mm to 10 mm. The thermal resistance of the thin longitudinal fins used is about 50% to 57% that of the thick longitudinal fins now in commercial use. The cooling performance of the thin-plate fins is almost the same as that of optimally arranged pin-fins with the same total surface area. A maximum value of six times the heat transfer rate of a single flat plate having the same base area was observed for the thin-plate fins. A comparison of cooling performance between impingement and channel flow systems was conducted. The performance of impingement cooling systems is almost unaffected by the breadth of the gap between the fin tops and the inlet orifice (or, for channel cooling, the upper wall). On the other hand, the performance of channel-cooling systems decreases significantly as the gap widens. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(7): 449–459, 1996     

Improvement of polymer/fullerene solar cells by controlling geometry of the ITO substrate surface

We have found that the short-circuit current, J_sc, of polymer/fullerene [RR-P3HT/C₆₀] solar cells has a clear dependence on the surface roughness of the ITO/glass substrate. We prepared an ITO surface with an average roughness, R_a, of 0.7–11 nm by chemical etching. At first J_sc increases with the increase in ITO surface roughness and then gradually decreases. The maximum performance was obtained at R_a≈4 nm. J_sc is also high with a very flat surface of R_a=0.7 nm. This feature can be attributed to the trade-off between the increase in absorption light path length and film-quality deterioration.     

Full-scale application of anaerobic digestion process with partial ozonation of digested sludge.

For improving sludge digestion and biogas recovery, a new anaerobic digestion process combined with ozonation was tested at a full-scale unit for 2 years and its performance was compared with a simultaneously operated conventional anaerobic digestion process. The new process requires two essential modifications, which includes ozonation for enhancing the biological degradability of sludge organics and concentrating of solids in the digester through a solid/liquid separation for extension of SRT. These modifications resulted in high VSS degradation efficiency of ca. 88%, as much as 1.3 times of methane production and more than 70% reduction in dewatered sludge cake production. Owing to accumulation of inorganic solids in the digested sludge, water content of the dewatered sludge cake also reduced from 80% to 68%. An energy analysis suggested that no supplemental fuel was necessary for the subsequent incineration of the cake from the new process scheme. The process is suitable to apply to a low-loaded anaerobic digestion tank, where power production is used.     

Inundation analysis of the effectiveness of an estuarygate in Hori River

Storm surges and floods around bays in Japan frequently result in water disasters. Both dikes and estuary gates can be constructed in urban areas near bays as counter measures. Estuary gates at the mouth of a river are intended to protect the upstream areas from storm surges and tsunamis. The sewer systems in urban areas also decrease the inundation. In this study, a numerical simulation is carried out to examine the effectiveness of the estuary gate and performance of the sewer system. A synthetic analysis model of inundation phenomena is developed and applied to the behavior of water in the urban area near the Nagoya Port and the estuary region of the Hori River. The developed model consists of models for the sea, river, sewer, overland flood flow, and typhoon. The inundation analysis model is validated by a comparison of analytical and observed results. The features of the inundations in the urban area caused by various conditions are discussed.