A single-power-supply 10-b video BiCMOS sample-and-hold IC

A +5-V single-power-supply 10-b video BiCMOS sample-and-hold IC is described. Video speed, low power, and 10-b accuracy sample-and-hold operation have been achieved using a complementary connected buffer format sample switch. A high-speed p-n-p transistor used in the sample switch is formed by a combination of n-p-n and PMOS transistors. The sample-and-hold operation is accomplished by feeding back the hold capacitor voltage to the sample switch inputs, so that the inputs transfer symmetrically for the hold capacitor voltage at any input level. The sample-and-hold IC has been implemented in 1.2-μm BiCMOS technology and evaluated. The following results have been obtained: 185-MHz 3-dB bandwidth at 22-pF hold capacitor, 63-dB signal-to-noise ratio at 8-MHz full-scale input, 20-ns acquisition time at 1-V step input, 15-ns switch setting time, and 0.1% linearity error. Power dissipation is 150 mW     

The effect of material difference and flange nominal size on the sealing performance of new gasketless flanges

This paper deals with a new seal system between flange joints without using a gasket. This gasketless flange includes a groove and an annular lip that is machined in one of the flange rings which when removed being in contact with the other flange to form a seal line when the flanges are assembled. In this study, firstly, fundamental dimensions are examined for unplasticized polyvinyl chloride (PVC-U JIS) to obtain the best sealing performance. Then, the effects of material difference and flange nominal size upon the sealing performance of the new gasketless flange are investigated for two types of materials, 0.25% carbon steel (S25C JIS) and PVC-U. It is found that the critical internal pressure at which leakage appears is mainly controlled by the maximum stress at the annular lip for each material even if the flange nominal sizes are different. The gasketless flange made by PVC-U shows the higher critical internal pressure compared with the case of S25C if the same clamping forces are applied. The effect of stress relaxation for PVC-U on the sealing performance is also considered. Then, it may be concluded that this PVC-U gasketless flange as well as S25C has good sealing performance.     

Study on heat transfer characteristics of reservoir embedded loop heat pipe (1st report,Influence of evaporator orientation against gravity and charged liquid weight on heat transfer characteristics)

High‐powered satellites need larger heat rejection areas. A deployable radiator is one of the key technologies for a high‐powered satellite bus. A Reservoir Embedded Loop Heat Pipe (RELHP) is a two‐phase heat transfer device that constitutes a deployable radiator. RELHP has an evaporator core which is used as a liquid reservoir to enhance operational reliability. This paper presents the heat transport characteristics of a RELHP under changing evaporator orientation against gravity and charged ammonia weight by experiment and calculation. Liquid slug position in the reservoir has a great influence on heat transport characteristics, caused by changing heat transfer coefficients between returned liquid into the evaporator and vapor in the reservoir. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(3): 143– 157, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20150     

Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid

A surface modification method by electrical discharge machining (EDM) with a green compact electrode has been studied to make thick TiC or WC layer. Titanium alloy powder or tungsten powder is supplied from the green compact electrode and adheres on a workpiece by the heat caused by discharge. To avoid the production process of the green compact electrode, a surface modification method by EDM with powder suspended in working fluid is proposed in this paper. After considering flow of working fluid in EDM process, the use of a thin electrode and a rotating disk electrode are expected to keep powder concentration high in the gap between a workpiece and an electrode and to accrete powder material on the workpiece. The accretion machining is tried under various electrical conditions. Titanium powder is suspended in working oil like kerosene. TiC layer grows a thickness of 150 μm with a hardness of 1600 Hv on carbon steel with an electrode of 1 mm in diameter. When a disk placed near a plate rotates in viscous fluid, the disk drags the fluid into the gap between the disk and the plate. Therefore, the powder concentration in the gap between a workpiece and a rotational disk electrode can be kept high. A wider area of the accretion can be obtained by using the rotational electrode with a gear shape.     

Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder

A combined experimental/numerical methodology is developed to fully consolidate pure ultrafine WC powder under a current-control mode. Three applied currents, 1900, 2100 and 2700 A, and a constant pressure of 20 MPa were employed as process conditions. The developed spark plasma sintering (SPS) finite-element model includes a moving-mesh technique to account for the contact resistance change due to sintering shrinkage and punch sliding. The effects of the heating rate on the microstructure and hardness were investigated in detail along the sample radius from both experimental and modeling points of view. The maximum hardness (2700 HV10) was achieved for a current of 1900 A at the core sample, while the maximum densification was achieved for 2100 and 2700 A. A direct relationship between the compact microstructure and both the sintering temperature and the heating rate was established.     

Multicopy suppressors of the sly1 temperature-sensitive mutation in the ER-Golgi vesicular transport in Saccharomyces cerevisiae

Saccharomyces cerevisiae Sly1 protein is a member of the Sec1/Munc18-family proteins, which are essential for vesicular trafficking, but their exact biological roles are yet to be determined. A temperature-sensitive sly1 mutant arrests the vesicular transport from the ER to Golgi compartments at 37 degrees C. We screened for multicopy suppressor genes that restore the colony formation of the sly1(ts) mutant to discover functionally interacting components. The suppressor genes obtained were classified as: (1) those that encode a multifunctional suppressor, SSD1; (2) heat shock proteins, SSB1 and SSB2; (3) cell surface proteins, WSC1, WSC2 and MID2; (4) ER-Golgi transport proteins, USO1 and BET1; and (5) an as-yet-uncharacterized protein, HSD1 (high-copy suppressor of SLY1 defect 1). By epitope tagging of the gene product, we found that Hsd1 protein is an ER-resident membrane protein. Its overproduction induced enlargement of ER-like membrane structures.     

A 400 K-transistor CMOS sea-of-gates array with continuous track allocation

A 0.8- mu m CMOS sea-of-gates (SOG) array with first-level wiring channels perpendicular to transistor rows and 40 0K transistors is integrated on a 6*7-mm/sup 2/ chip. Implementation of a 64-bit multiplier shows 60-percent gate utilization and density of 1410 G/mm/sup 2/. The wiring length of the multiplier is 70 percent of that in a conventional SOG.<>     

Tor, a phosphatidylinositol kinase homologue, controls autophagy in yeast

Autophagy is a bulk protein degradation process that is induced by starvation. The control mechanism for induction of autophagy is not well understood. We found that Tor, a phosphatidylinositol kinase homologue, is involved in the control of autophagy in the yeast, Saccharomyces cerevisiae. When rapamycin, an inhibitor of Tor function, is added, autophagy is induced even in cells growing in nutrient-rich medium. A temperature-sensitive tor mutant also leads to induction of autophagy at a nonpermissive temperature. These results indicate that Tor negatively regulates the induction of autophagy. Tor is the first molecule that is identified as a pivotal player in the starvation-signaling pathway of autophagy. Furthermore, we found that a high concentration of cAMP is inhibitory for induction of autophagy. APG gene products are involved in autophagy induced by starvation. Autophagy was not induced in apg mutants in the presence of rapamycin, indicating that the site of action of Tor is upstream of those of Apg proteins. In nutrient-rich medium, Apg proteins are involved also in the transport of aminopeptidase I from the cytosol to the vacuole. Tor may act to switch Apg function between autophagy and transport of aminopeptidase I.     

Fluorescent estimation of H2O2-induced changes in cell viability and cellular nonprotein thiol level of dissociated rat thymocytes

Vector control and the detection (followed by treatment) of infected individual are the two methods currently available for the control of sleeping sickness. The basic reproduction rate of a compartmental model (Kermack and McKendrick) is used to analyze and compare the two strategies. The model shows that when there is a long first stage characteristic of an endemic situation, the detection of sick individuals is more efficient than vector control. This higher efficiency of detection decreases in a epidemic situation. In this case vector control in the form of a decrease in vector density and/or an increase in vector mortality is relatively more efficient than detection. Because it is squared in the basic reproduction rate, the probability of a tsetse blood meal on humans is an important and sensitive parameter in the study of control strategies. This sensitivity has been observed previously and empirically by field workers. When the probability of a tsetse blood meal on humans is above a certain value, vector control becomes warranted or even necessary.