Young’s modulus of crystalline C60 nanotubes studied by in situ transmission electron microscopy

Bending tests of crystalline nanotubes composed of fullerene C₆₀ molecules are performed inside a high-resolution transmission electron microscope. We fixed one side of a C₆₀ nanotube with a body-centered tetragonal structure with typical inner and outer diameters, i.e., 180 nm and 510 nm, respectively, and then applied concentrated forces on the other side using piezomanipulation of a silicon nanotip. The bending process was observed in situ by transmission electron microscopy with simultaneous measurements of the forces by an optical deflection method. It was found that the Young’s modulus of the nanotube was estimated to be 62–107 GPa, which was 1.1–3.3 times larger than that of C₆₀ nanowhiskers. The result concerning the increase in the Young’s modulus of the C₆₀ nanotube provided an experimental evidence for the structural model composed of an inner core and a surface shell for C₆₀ nanowhiskers.     

An algorithm for the three-dimensional packing problem with asymptotic performance analysis

The three-dimensional packing problem can be stated as follows. Given a list of boxes, each with a given length, width, and height, the problem is to pack these boxes into a rectangular box of fixed-size bottom and unbounded height, so that the height of this packing is minimized. The boxes have to be packed orthogonally and oriented in all three dimensions. We present an approximation algorithm for this problem and show that its asymptotic performance bound is between 2.5 and 2.67. This result answers a question raised by Li and Cheng [5] about the existence of an algorithm for this problem with an asymptotic performance bound less than 2.89. This research was partially supported by FAPESP (proc. 93/0603-1) and by CNPq/ProTeM-CC, project ProComb (proc. 680065/94-6).     

In vivo functions of the auxiliary genes and regulatory elements of feline immunodeficiency virus

Feline immunodeficiency virus (FIV) is a widespread lentivirus of domestic cats that causes an acquired immunodeficiency syndrome (AIDS)-like disease similar to human AIDS caused by human immunodeficiency virus. FIV has a complex genome structure including structural, enzymatic and auxiliary genes and regulatory elements. In this article, we review the in vivo roles of some of these FIV auxiliary genes and regulatory elements, especially focusing on the dUTPase, vif, and ORF-A genes and AP-1 binding site in the enhancer region of the long terminal repeat, by comparison with those of other non-primate lentiviruses. These genes and elements are considered to be important for viral replication, immunological response and pathogenesis in cats.     

Age-related accumulation of phosphatidylcholine hydroperoxide in cultured human diploid cells and its prevention by α-tocopherol

The levels of phosphatidylcholine hydroperoxide in serially cultured human fetal diploid fibroblasts at various population doubling levels were determined by high-performance liquid chromatography combined with chemiluminescence detections. This methodology utilizes a mixture of cytochromec and luminol as post-column hydroperoxide group specific luminescent reagents. The cellular hydroperoxide content increased with age from 0.34 to 27.72 pmol/10⁶ cells. At the end of the cells'in vitro lifespan (51st population doubling level), the hydroperoxide content per 10⁶ cells reached about 80 times the level found in cells of the 20th population doubling level. Supplementation of exogenous α-tocopherol to the culture medium prevented hydroperoxide accumulation, but did not extent the lifespanin vitro. The results indicate that substantial intracellular phospholipid hydroperoxide accumulation occurred in the course of aging of human fetal liploid fibroblasts.     

Network formation and swelling behavior of photosensitive poly(vinyl alcohol) gels prepared by photogenerated crosslinking

Poly (vinyl alcohol) with pendent styrylpyridinium groups (SbQ) is insolubilized by photoirradiation. An association takes place in SbQ groups. The association of polymer chains becomes marked with increasing the number of SbQ groups. Mainly intermolecular crosslinks were formed. Transparent and homogeneous macrogels consisting of several intermolecular crosslinks are obtained. The proportion of the free water to the bound water in PVA-SbQ gels was 3.3?2.9 despite of the large change in conversion of photodimerization of SbQ groups, x=0.27?0.58. The water uptake after swelling of the gels in water increased 6–27 times compared to the original weight at pH=7. The higher the degree of photocrosslinking, the lower was the degree of swelling. The water diffusion coefficients, D, were (2.2?5.8) × 10^?5 cm² S^?1 for a 88% saponified PVA with 1 . 3 mol% SbQ groups. The volume of the gel increased discontinuously about 10-fold for the 99% saponified PVA with 0 . 096 mol% SbQ and 51% water (49% acetone). The acetone concentration at the transition decreased with increasing the degree of saponification of the PVA.     

Application of enzymatically gelled chitosan solutions to water‐resistant adhesives

An investigation was undertaken on the application of dilute chitosan solutions gelled by tyrosinase‐catalyzed reaction with 3,4‐dihydroxyphenethylamine (dopamine). The tyrosinase‐catalyzed reaction with dopamine conferred water‐resistant adhesive properties to the semidilute chitosan solutions. The viscosity of the chitosan solutions increased highly by the tyrosinase‐catalyzed reaction and the subsequent reactions between o‐quinone compounds and chitosan. These highly viscous, gel‐like modified chitosan materials were allowed to spread onto the surfaces of the glass slides, which were tightly lapped together and held them in water. Tensile shear adhesive strength of over 400 kPa was observed for the modified chitosan samples. The increase in the amino group concentration of the chitosan solutions and the molecular mass of the chitosan used effectively led to the increase in adhesive strength of the glass slides. In addition, in the case where the chitosan solution was gelled by the enzymatic reaction with dopamine in the presence of poly(ethylene glycol), adhesive strength sharply increased at shorter reaction times concomitantly with the increase in the viscosity of the chitosan solutions because the tyrosinase activity effectively was retained by poly(ethylene glycol). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1818–1827, 2007     

Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

Separation and determination of glycolipids from edible plant sources by high-performance liquid chromatography and evaporative light-scattering detection

Glycolipids from edible plant sources were accurately quantified by silica-based, normal-phase high-performance liquid chromatography using an evaporative light-scattering detector. Five major glycolipid classes (acylated steryl glucoside, steryl glucoside, ceramide monohexoside, monogalactosyldiacylglycerol, and digalactosyldiacylglycerol) were separated and determined with a binary gradient system consisting of chloroform and methanol/water (95∶5, vol/vol) without any interference from other lipid classes and pigments. The described method was applied to 48 edible plants available in Japan including cereals, legumes, vegetables, and fruits. Examined plant species contained glycolipids in wide concentration ranges, such as 5–645 mg/100 g tissue.     

Autoxidation of ethyl eicosapentaenoate and docosahexaenoate

The extent of oxidation of ethyl esters of eicosapentaenoic (EPA) and docosahexaenoic acids (DHA) was compared quantitatively with that of ethyl linoleate (Lo) and ethyl linolenate (Ln) by oxygen uptake and formation of conjugated diene, hydroperoxide and secondary oxidation products. EPA and DHA esters were oxidized rapidly even at 5 C in the dark after an induction period of 3–4 days, while the induction periods of Ln and Lo esters were 20 days and more than 60 days, respectively. Oxygen uptake of EPA and DHA esters after the induction period was 5.2 and 8.5 times faster than that of ethyl Ln, respectively. Hydroperoxides of EPA and DHA esters are much less stable than those of ethyl Lo. The peroxide value is not necessarily a good indication of oxidation in these polyenoic acids because a considerable amount of secondary products is formed at the early stage of oxidation. Polymers were found to be major secondary products in these polyenoic esters.     

Electrochemical micromachining using a solid electrochemical reaction at the metal/β″-Al2O3 microcontact

A simple solid state technique for electrochemical micromachining of metal substrates using a metal ion conductor (Na-β″-Al₂O₃) was proposed. The fundamental solid electrochemical cell consists of a (anode) metal substrate (M = Ag, Cu, Zn, and Pb)/pyramidal Na-β″-Al₂O₃/Ag (cathode) system, where the contact diameter between M/Na-β″-Al₂O₃ was extremely small, on the order of a few micrometer. Under an applied electric field, the metal substrate was electrochemically oxidized to metal ions (Mⁿ⁺) at the M/Na-β″-Al₂O₃ microcontact. These Mⁿ⁺ ions migrated into the Na-β″-Al₂O₃. As a result of continuous electrolysis, the metal substrate was locally consumed at the microcontact, and thus solid state electrochemical micromachining was accomplished. As expected, the machining size or depth depended on the electrolysis conditions (current, operating time) and the apex configuration of pyramidal Na-β″-Al₂O₃. Moreover, the scanning of the Na-β″-Al₂O₃ pyramid during electrolysis produced a fine patterned metal substrate. In the present paper, solid state electrochemical micromachining was performed for several metal substrates, and its advantages and disadvantages vis-a-vis the conventional electrochemical micromachining method are discussed in detail.