Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Nickel‐Catalyzed Suzuki–Miyaura Coupling of a Tertiary Iodocyclopropane with Wide Boronic Acid Substrate Scope: Coupling Reaction Outcome Depends on Radical Species Stability

We describe a nickel‐catalyzed Suzuki–Miyaura arylation of a tertiary iodocyclopropane with arylboronic acids; this is an efficient and convergent strategy for providing various enantioenriched arylcyclopropanes with a quaternary stereogenic center. This is the first metal‐catalyzed coupling between a tertiary alkyl electrophile and a wide range of aromatics, including heteroaromatics. We found that the outcome of the Ni‐catalyzed coupling with halides as electrophiles was dependent on the stability of the radical species formed during the reaction. The use of tert‐butyl alcohol (t‐BuOH) as the reaction solvent was very effective, because of its stability under the radical‐generating reaction conditions.

     

Characteristics of fluoride adsorption onto aluminium(III) and iron(III) hydroxide flocs

The fluoride adsorption onto the hydroxide flocs of Al(III), Fe(III), or a mixture of the two was studied. The optimum pH was influenced by the flocs’ solubility and surface charge. Although the Al(III) hydroxide flocs had a maximum adsorption capacity at the equilibrium concentration of 8 mg-F/L, the two-stage adsorption process revealed that the mixture of the Al(III) and Fe(III) hydroxide flocs required the smallest adsorbent dose as the concentration changed from 40 to 8 mg-F/L. Thus, the simultaneous dosing of Al(III) and Fe(III) combined with a two-stage adsorption process appears to be an effective option for fluoride removal.     

High thermal conductivity of spark plasma sintered silicon carbide ceramics with yttria and scandia

A fully dense SiC ceramic with a room‐temperature thermal conductivity of 262 W·(m·K)^?1 was obtained via spark plasma sintering β‐SiC powder containing 0.79 vol% Y₂O₃‐Sc₂O₃. High‐resolution transmission electron microscopy revealed two different SiC‐SiC boundaries, that is, amorphous and clean boundaries, in addition to a fully crystallized junction phase. A high thermal conductivity was attributed to a low lattice oxygen content and the presence of clean SiC‐SiC boundaries.     

Effect of Ganglioside GM3 Synthase Gene Knockout on the Glycoprotein N‐Glycan Profile of Mouse Embryonic Fibroblast

The structural and clinical significance of cellular glycoproteins and glycosphingolipids (GSLs) are often separately discussed. Considering the biosynthetic pathway of glycoconjugates, glycans of cell‐surface glycoproteins and GSLs might partially share functions in maintaining cellular homeostatis. The purpose of this study is to establish a general and comprehensive glycomics protocol for cellular GSLs and N‐glycans of glycoproteins. To test the feasibility of a glycoblotting‐based protocol, whole glycans released both from GSLs and glycoproteins were profiled concurrently by using GM3 synthase‐deficient mouse embryonic fibroblast GM3(?/?). GM3(?/?) cells did not synthesize GM3 or any downstream product of GM3 synthase. Instead, expression levels of o‐series gangliosides involving GM1‐b and GD1‐α increased dramatically, whereas a‐/b‐series gangliosides were predominantly detected in wild‐type (WT) cells. We also discovered that glycoprotein N‐glycan profiles of GM3(?/?) cells are significantly altered as compared to WT cells, although GM3 synthase is responsible only for GSLs synthesis and is not associated with glycoprotein N‐glycan biosynthesis. The present approach allows for high‐throughput profiling of cellular glycomes enriched by different classes of glycoconjugates, and our results demonstrated that gene knockout of the enzymes responsible for GSL biosynthesis significantly influences the N‐glycans of glycoproteins.     

Investigation of Ozone Concentration Measurement by Visible Photo Absorption Method

The measurement of ozone concentration based on the visible photo absorption method is investigated. An LED having an emission peak at 609 nm and a photo diode sensitive at visible light frequencies are used as the light source and the photo detector, respectively. The transmittance is measured as a function of ozone concentration, which is in reasonable agreement with the Beer–Lambert relationship. The effective absorption cross-section can therefore be estimated from the fitting procedure. The concentrations determined by both the UV and visible photo absorptions agree well with each other in the range from 7.1 to 68.4 g/m³(N). The relative error in these concentrations is discussed on the basis of the Twyman–Lothian curve. The ozone measurement for the air-fed ozone generation is also investigated. The effect of photo absorption due to NOx species is unavoidable. The present results provide useful data if the ozone measurement based on the visible photo absorption method is applied to ozone monitoring instruments or used for laboratory experiments.     

An Engineered Biocatalyst for the Synthesis of Glycoconjugates: Utilization of β1,3‐N‐Acetyl‐D‐glucosaminyltransferase from Streptococcus agalactiae Type Ia Expressed in Escherichia coli as a Fusion with Maltose‐Binding Protein

A fusion protein composed of β1,3‐N‐acetyl‐D ‐glucosaminyltransferase (β1,3‐GlcNAcT) from Streptococcus agalactiae type Ia and maltose‐binding protein (MBP) was produced in Escherichia coli as a soluble and highly active form. Although this fusion protein (MBP‐β1,3‐GlcNAcT) did not show any sugar‐elongation activity to some simple low‐molecular weight acceptor substrates such as galactose, Galβ(1→4)Glc (lactose), Galβ(1→4)GlcNAc (N‐acetyllactosamine), Galβ(1→4)GlcNAcβ(1→3)Galβ(1→4)Glc (lacto‐N‐tetraose), and Galβ(1→4)GlcβCer (lactosylceramide, LacCer), the multivalent glycopolymer having LacCer‐mimic branches (LacCer mimic polymer, LacCer primer) was found to be an excellent acceptor substrate for the introduction of a β‐GlcNAc residue at the O‐3 position of the non‐reducing galactose moiety by this engineered enzyme. Subsequently, the polymer having GlcNAcβ(1→3)Galβ(1→4)Glc was subjected to further enzymatic modifications by using recombinant β1,4‐D ‐galactosyltransferase (β1,4‐GalT), α2,3‐sialyltransferase (α2,3‐SiaT), α1,3‐L ‐fucosyltransferase (α1,3‐FucT), and ceramide glycanase (CGase) to afford a biologically important ganglioside; Neu5Aα(2→3)Galβ(1→4)[Fucα(1→3)]GlcNAcβ(1→3)Galβ(1→4)GlcCerα(IV3Neu5Acα,III3Fucα‐nLc4Cer) in 40% yield (4 steps). Interestingly, it was suggested that MBP‐β1,3‐GlcNAcT could also catalyze a glycosylation reaction of the LacCer mimic polymer with N‐acetyl‐D ‐galactosamine served from UDP‐GalNAc to afford a polymer carrying trisaccharide branches, GalNAcβ(1→3)Galβ(1→4)Glc. The versatility of the MBP‐β1,3‐GlcNAcT in the practical synthesis was preliminarily demonstrated by applying this fusion protein as an immobilized biocatalyst displayed on the amylose resin which is known as a solid support showing potent binding‐affinity with MBP.     

Fracture behavior of core‐shell rubber–modified clay‐epoxy nanocomposites

Morphology and fracture mechanisms in two nanoclay‐filled epoxy systems were investigated using both microscopy and spectroscopy tools. Clay exfoliation was achieved using a series of sample preparation steps, and confirmed using wide angle X‐ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. Significant improvement in modulus was obtained when clay exfoliation was achieved. Incorporation of core‐shell rubber (CSR) in both caly‐filled epoxy systems leads to greatly enhanced fracture toughness. Optical microscopy and TEM observations of the CSR‐modified nanocomposites suggest that CSR cavitation. shear yielding of the matrix, clay layer delamination. CSR bridging, crack bifurcation. and crack deflection are among the operative toughening mechanisms observed, depending on the nature of the epoxy matrix utilized.     

Synthesis and Self-Organization of Fluorene-Conjugated Bisimidazolylporphyrin and Its Optical Properties

A conjugated-bisimidazolylporphyrin bridged by bis(ethynylfluorene) was synthesized and organized into linear polymer through self-coordination having mean molecular weights, M_w and M_n, of ~2.1 × 10⁵ Da and ~1.6 × 10⁵ Da, respectively. A large two-photon absorption cross section value of 3.4 × 10⁵ GM (per dimer unit) was observed. This value was comparable to that of the previously reported self-assembled linear polymer consisting of butadiyne-bridged imidazolylporphyrins. The two-photon absorption properties could be controlled by tuning the wavelength and absorption intensity of the one-photon absorption.