Indium oxide thin film based ammonia gas and ethanol vapour sensor

A sensor for ammonia gas and ethanol vapour has been fabricated using indium oxide thin film as sensing layer and indium tin oxide thin film encapsulated in poly(methyl methacrylate) (PMMA) as a miniature heater. For the fabrication of miniature heater indium tin oxide thin film was grown on special high temperature corning glass substrate by flash evaporation method. Gold was deposited on the film using thermal evaporation technique under high vacuum. The film was then annealed at 700 K for an hour. The thermocouple attached on sensing surface measures the appropriate operating temperature. The thin film gas sensor for ammonia was operated at different concentrations in the temperature range 323–493 K. At 473 K the sensitivity of the sensor was found to be saturate. The detrimental effect of humidity on ammonia sensing is removed by intermittent periodic heating of the sensor at the two temperatures 323K and 448 K, respectively. The indium oxide ethanol vapour sensor operated at fixed concentration of 400 ppm in the temperature range 293–393 K. Above 373 K, the sensor conductance was found to be saturate. With various thicknesses from 150–300 nm of indium oxide sensor there was no variation in the sensitivity measurements of ethanol vapour. The block diagram of circuits for detecting the ammonia gas and ethanol vapour has been included in this paper.     

Optical and electrical properties of ZrSe3 single crystals grown by chemical vapour transport technique

Single crystals of the lamellar compound, ZrSe₃, were grown by chemical vapour transport technique using iodine as a transporting agent. The grown crystals were characterized with the help of energy dispersive analysis by X-ray (EDAX), which gave confirmation about the stoichiometry. The optical band gap measurement of as grown crystals was carried out with the help of optical absorption spectra in the range 700–1450 nm. The indirect as well as direct band gap of ZrSe₃ were found to be 1.1 eV and 1.47 eV, respectively. The resistivity of the as grown crystals was measured using van der Pauw method. The Hall parameters of the grown crystals were determined at room temperature from Hall effect measurements. Electrical resistivity measurements were performed on this crystal in the temperature range 303–423 K. The crystals were found to exhibit semiconducting nature in this range. The activation energy and anisotropy measurements were carried out for this crystal. Pressure dependence of electrical resistance was studied using Bridgman opposed anvils set up up to 8 GPa. The semiconducting nature of ZrSe₃ single crystal was inferred from the graph of resistance vs pressure. The results obtained are discussed in detail.     

Possible Phase Transition at Low mK Temperatures in Liquid Helium Mixture Films Adsorbed on Graphite

We report heat capacity and magnetisation measurements of ³He adsorbed on the surface of graphite plated with three atomic layers of ⁴He. For ³He coverages n ₃>4 nm^?2 the heat capacity corresponds to a 2D Fermi fluid. The inferred hydrodynamic mass of the ³He quasiparticles is 1.38±0.05 m₃. The ³He effective mass ratio increases with coverage to 2.4 at n ₃=4 nm^?2, due to Fermi liquid interactions. The heat capacity isotherm exhibits a steplike increase centred on n ₃=4.5 nm^?2, similar to that previously observed on four layers of ⁴He. This is associated with the population of the first excited Andreev surface bound state. However, in the present case, as n ₃ is increased through the step a pronounced anomalous feature develops in the temperature dependence of the heat capacity, around 10 mK. Below 5 mK the heat capacity is approximately linear in temperature. With n ₃=7 nm^?2, we find that this behaviour is very sensitive to small changes in the ⁴He third layer coverage, around the completed third layer. Measurements of the ³He magnetisation,, by continuous wave NMR methods, find a significant increase with decreasing temperature below around 20 mK. Together the data suggest that a phase transition takes place in the film at low mK temperatures.     

Use of GafChromic film to diagnose laser generated proton beams

A calibration of three types of GafChromic radiochromic film (HS, MD-55, and HD-810) was carried out on the Crocker Nuclear Laboratory's 76 in. cyclotron at UC Davis over doses ranging from 0.001 to 15 kGy. The film was digitized with a scanning microdensitometer with which it was scanned twice with two different filters to increase the film's effective dynamic range. We demonstrate how this calibrated film can be used to measure the spectrum and total energy of a laser generated proton beam. This technique was applied to an experiment on the 10 J, 100 fs Callisto laser at Lawrence Livermore National Laboratory. The resulting proton spectrum was compared to that obtained by simultaneous measurement of Ti nuclear activation; the two methods give the same proton beam slope temperature and agree in number of protons to within 27%.     

Simulating ion beam extraction from a single aperture triode acceleration column: a comparison of the beam transport codes IGUN and PBGUNS with test stand data

Ion beam extraction from two different ion sources with single aperture triode extraction columns was simulated with the particle beam transport codes PBGUNS and IGUN. For each ion source, the simulation results are compared to experimental data generated on well-equipped test stands. Both codes reproduced the qualitative behavior of the extracted ion beams to incremental and scaled changes to the extraction electrode geometry observed on the test stands. Numerical values of optimum beam currents and beam emittance generated by the simulations also agree well with test stand data.     

Notes on ensembles of IoT,network functions and clouds for service-oriented computing and applications

Many advances have been introduced recently for service-oriented computing and applications (SOCA). The Internet of Things (IoT) has been pervasive in various application domains. Fog/Edge computing models have shown techniques that move computational and analytics capabilities from centralized data centers where most enterprise business services have been located to the edge where most customer’s Things and their data and actions reside. Network functions between the edge and the cloud can be dynamically provisioned and managed through service APIs. Microservice architectures are increasingly used to simplify engineering, deployment and management of distributed services in not only cloud-based powerful machines but also in light-weighted devices. Therefore, a key question for the research in SOCA is how do we leverage existing techniques and develop new ones for coping with and supporting the changes of data and computation resources as well as customer interactions arising in the era of IoT and Fog/Edge computing. In this editorial paper, we attempt to address this question by focusing on the concept of ensembles for IoT, network functions and clouds.     

Synthesis of flame retardant polyester‐urethanes and their applications in nanoclay composites and coatings

This paper describes the synthesis of phosphorus‐containing polyester‐urethanes and their applications in nanoclay composites and coatings. Polyester was prepared by the reaction of bis(bisphenol‐A) monophenyl phosphonate, maleic anhydride and phthalic anhydride. The polyester was reacted with various diols such as ethylene glycol, diethylene glycol and propylene glycol to obtain polyester polyols. Synthesized polyester polyols were characterized by chemical analysis and instrumental analysis and was used further to react with different isocyanates to develop polyester‐urethanes. The synthesized polyester‐urethanes were blended with organo‐modified montmorillonite nanoclay (1 wt%, 3 wt% and 5 wt%) and were cast in a mold and coated on mild steel panels. The thermal stability of neat polyester‐urethane and the nanoclay composites was determined by thermogravimetric analysis. The flame retardant properties of cast films and their composites were determined by the limiting oxygen index and UL‐94 test methods. The physical and mechanical properties of coatings such as pot life, drying properties, scratch hardness, pencil hardness, impact resistance, adhesion and flexibility were investigated. The chemical resistance properties of the coatings were also determined in different reagents. The data reveal that the polyester‐urethane nanoclay composites with 3 wt% clay hold promise for use in effective flame retardant coatings. © 2013 Society of Chemical Industry     

Effect of Temperature on Hydraulic Parameters of Cable-In-Conduit-Conductor of SST-1

Stable operation of superconducting magnets depend critically on the balance of heat deposition rate versus heat extraction rate by the cryo-coolant. Thus, the mass flow rate of the coolant in case of force-flow cooled superconducting magnet with Cable-In-Co-nduit-Conductor (CICC) construction becomes an important factor for optimum stability of magnets. The Toroidal and Poloidal Field magnets of Steady-state Superconducting Tokamak-1 (SST-1) is made of superconducting CICC with a void fraction of 40 %±2 %. For adequate cooling of magnets, supercritical helium at 4 bar and 4.5 K is forced-flown through the voids. Effect of temperature on mass flow rate and pressure drop in SST-1 CICC is studied in a 7 m long piece wound helically. The experimental friction factor of the CICC is also measured at different temperatures and flow rates and is compared with the standard Katheder equation and Tada equation. Also, based on the new findings obtained from the experimental results, the dimensionless Reynolds number has been slightly modified. This new number is used to propose a modified Katheder correlation for the friction factor in CICCs similar to that of SST-1.     

Freestanding chemiresistive polymer composite ribbons as high-flux sensors

Chemiresistive polymer composite ribbons that function as chemical detectors were produced from solution-cast films of polymers and carbon composites. An array with multiple polymer sensor threads was exposed to dimethyl methyl phosphonate, a nerve agent simulant, and different interferents in the vapor phase. Principal component analysis was used to differentiate between the analytes. The response of the ribbon sensors as a function of the carbon composite and the host polymer source was investigated. The freestanding threads/sensors were mounted into a cell perpendicular to the gas flow to provide little pressure drop and were imbedded into fabrics to provide an example of a small, low-cost, wearable chemical sensor. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012