Microstructure and yield strength of UDIMET 720LI alloyed with Co-16.9 Wt Pct Ti

We proposed a new method for developing Ni-base turbine disc alloy for application at temperatures above 700 °C by mixing a Ni-base superalloy U720LI with a two-phase alloy Co-16.9 wt pct Ti in various contents. The microstructure and phase stability of the alloys were analyzed using an optical microscope, a scanning electron microscope, energy-dispersive spectroscopy, and an X-ray diffractometer. The yield strength was studied by compression tests at temperatures ranging from 25 °C to 1200 °C. The results show that all the alloys had a dendritic structure. Ni₃Ti (η) phase was formed in the interdendritic region in the alloys with the addition of Co-16.9 wt pct Ti, and its volume fraction increased with the increase in the addition of Co-16.9 wt pct Ti. The results of exposure at 750 °C show that the addition of Co-16.9 wt pct Ti to U720LI had a great effect on suppressing the formation of σ phase due to the reduced Cr content in the γ matrix. Compared to U720LI, the alloys with the addition of Co-16.9 wt pct Ti possessed higher yield strength. The solid-solution strengthening of γ and γ′ and higher volume fraction of γ′ were assumed to cause this strength increase.     

Relationship between electrode surface roughness and impulse breakdown voltage in vacuum gap of Cu and Cu-Cr electrodes

The relationship between the impulse breakdown voltage of vacuum gaps and electrode surface roughness was investigated for the purpose of controlling the surface roughness on HV conductors. The roughness of mechanically polished Cu and Cu-Cr electrodes was measured with a roughness meter, and the relationship between the breakdown voltage and surface roughness was obtained for plate-to-plate gaps. The discharge-conditioning effect increased with reduction in the surface roughness. The breakdown voltage depended not only on the roughness of the cathode but also on the anode surfaces. Reducing the surface roughness was found not to be an effective way to increase the breakdown voltage for non-uniform field gaps after discharge conditioning.     

Frequency range extension of actively mode-locked lasers integratedwith electroabsorption modulators using chirped gratings

We have fabricated actively mode-locked lasers integrated with electroabsorption modulators and chirped gratings. A chirped grating with a large chirp rate of 1.45 Å/μm can be realized by using multiphase-shifted patterns. Short pulses of 4-6 ps were generated over a wide frequency range from 18.9-19.8 GHz. We observed jumps in the wavelength during detuning. These jumps arise from multiple lobes in the reflectivity spectrum. It is found that the wavelength jumps cause increases in the intensity noise. We showed that by reducing the grating length from 150 to 100 μm the sidelobes were suppressed and the detuning frequency range of over 1% could be realized. A smaller pulsewidth was obtained for the negatively-chirped gratings when compared to the positively chirped gratings     

Multi-modal Information Integration for Interactive Multi-agent Systems

This paper proposes a multi-agent system that carries out cooperative work. To achieve this, we use Fuzzy Associative Memory Organizing Unit Systems (FAMOUS) and Conceptual Fuzzy Sets (CFS). By using these proposed methods, each agent robot can decide its own behaviour to suit the situation in its environment. We apply this system to an Intelligent Transportation System (ITS) and do simulations.     

Growth of Yb-doped YLiF4 laser crystal by the Czochralski method. Attempt of Yb energy level assignment and estimation of the laser potentiality

YLiF₄ (YLF) single crystals undoped and Yb³⁺-doped with different concentrations were grown by the Czochralski technique under CF₄ atmosphere. Detailed analysis of Yb³⁺-doped YLF spectroscopy were made to contribute to the determination of energy levels in this host. We are dealing with temperature and concentration dependences of both π and σ polarizations of the infrared (IR) absorption and emission spectra. Raman spectra were also used to give an attempt of interpretation of electronic and vibronic levels. The radiative energy transfer (self-trapping) and strong phonon–electron coupling make the assignment of Yb³⁺ energy levels difficult. Evaluation of the laser potentiality of this fluoride host is also presented.     

Czochralski growth of Yb doped oxyapatite for high power laser application

Ca₈(La,Yb)₂(PO₄)₆O₂ (Yb:CLPA) single crystals with the apatite-type structure could be grown from the melt using the Czochralski method. Grown crystal was 18 mm in diameter and 110 mm in length. It is transparent with slightly blue color. Neither visible inclusion nor crack was observed. Thermal conductivity of Yb:CLPA was calculated from the values of thermal diffusivity, heat capacity measurement and density. Luminescent characterization was carried out from the results of emission, absorption and Raman spectrum.     

The Atmospheric Scanning Electron Microscope with open sample space observes dynamic phenomena in liquid or gas

Although conventional electron microscopy (EM) requires samples to be in vacuum, most chemical and physical reactions occur in liquid or gas. The Atmospheric Scanning Electron Microscope (ASEM) can observe dynamic phenomena in liquid or gas under atmospheric pressure in real time. An electron-permeable window made of pressure-resistant 100 nm-thick silicon nitride (SiN) film, set into the bottom of the open ASEM sample dish, allows an electron beam to be projected from underneath the sample. A detector positioned below captures backscattered electrons. Using the ASEM, we observed the radiation-induced self-organization process of particles, as well as phenomena accompanying volume change, including evaporation-induced crystallization. Using the electrochemical ASEM dish, we observed tree-like electrochemical depositions on the cathode. In silver nitrate solution, we observed silver depositions near the cathode forming incidental internal voids. The heated ASEM dish allowed observation of patterns of contrast in melting and solidifying solder. Finally, to demonstrate its applicability for monitoring and control of industrial processes, silver paste and solder paste were examined at high throughput. High resolution, imaging speed, flexibility, adaptability, and ease of use facilitate the observation of previously difficult-to-image phenomena, and make the ASEM applicable to various fields.     

Permeation measurements for investigating atomic hydrogen flux and wall pumping/fuelling dynamics in QUEST

In order to investigate the overall atomic hydrogen background and the dynamic characteristics of wall pumping/fuelling phenomenon, a permeation probe system has been developed and applied in the spherical tokamak QUEST. Reliability of measurements, within ±3% accuracy and a positive correlation with the hydrogen line emission over three orders of magnitude have been demonstrated for more than 3000 various plasma discharges. By comparison of the experimental permeation (flux) curves with the numerically simulated curves, the net incident atomic hydrogen flux is evaluated in the range of 1 × 10¹⁹ H m^?2 s^?1 to 4 × 10²⁰ H m^?2 s^?1. The atomic flux has been investigated as a function of various plasma operation parameters like RF power, gas pressure and magnetic configuration. Using the static particle balance and permeation measurements, the progress in wall conditioning has been investigated. An inverse correlation between the atomic hydrogen flux and improvement in wall pumping has been observed over the two campaigns.     

Clinically applicable bulk isolation of blood CD34+ cells for autografting in children

The quality of population-based cancer registries has been measured by the indices of the proportion of total incident cases (DCO%) registered by death certificate only (DCO), and the ratio of incidence to mortality (I/D ratio). Recently it has been recommended that DCO% should be used as an index for the reliability of diagnosing cancers and that the proportion of cases first notified via death certificate (DCN, DCN%) be used as an index for the completeness of registration. Parkin introduced a method to estimate the registration rate, the estimated proportion of the "true incidence" that are registered in population-based registries. We recommend a modified method for estimating the registration rate for cancer registries where DCN% is relatively high, as it is in Japan, as Parkin's method may overestimate the registration rate. The method is as follows: the registration rate = (1-DCN% x 1/D ratio)/(1-DCN%). The registration rates at the Osaka Cancer Registry between 1966 and 1992 were estimated using our method. During this period, the yearly registration rate was 74.6-78.4% for males and 69.1-73.3% for females. When the cancer cases were looked at according to site, the yearly registration rate was 74.2-81.6% for stomach cancer, 81.2-89.3% for lung cancer, and 71.3-76.9% for uterine cancer. These results show that the registration rate is high for cancers that have an unfavorable prognosis and low for cancers that have a favorable prognosis. We recommend that all cancer registries in Japan calculate the completeness of registration by utilizing DCN defined as the sum of DCO plus cases not reported as cancer but with supportive clinical information of such obtained through survey of the registry for DCN.