Performance analysis of opportunistic broadcast for delay-tolerant wireless sensor networks

This paper investigates a class of mobile wireless sensor networks that are unconnected most of the times; we refer to them as delay-tolerant wireless sensor networks (DTWSN). These networks inherit their characteristics from both delay tolerant networks (DTN) and traditional wireless sensor networks. After introducing DTWSNs, three main problems in the design space of these networks are discussed: routing, data gathering, and neighbor discovery. A general protocol is proposed for DTWSNs based on opportunistic broadcasting in delay-tolerant networks with radio device on-off periods. Three performance measures are defined in the study: the energy for sending queries to ask for data from possible neighbors (querying energy), data transfer energy, and absorption time (delay). A simple yet accurate approximation for the data-transfer energy is proposed. An analytic model is provided to evaluate the querying energy per contact (epc). Simulation results for the data propagation delay show that the querying energy per contact measure obtained from the analytic model is proportional to the product of the querying energy and the delay. A practical rule of thumb for an optimal query interval in terms of delay and energy is derived from different parts of the study.     

The performance of multiwavelets based OFDM system under different channel conditions

In wireless communication reception, the reliability of orthogonal frequency division multiplexing (OFDM) is limited because of the time-varying nature of the channel. This causes inter-carrier interference (ICI) and increases inaccuracies in channel tracking. This can effectively be avoided at the cost of power loss and bandwidth expansion by inserting a cyclic prefix guard interval before each block of parallel data symbols. However, this guard interval decreases the spectral efficiency of the OFDM system as the corresponding amount. Recently, it was found that based on Haar-orthonormal wavelets, discrete wavelet-based OFDM (DWT-OFDM) is capable of reducing the inter symbol interference (ISI) and ICI, which are caused by the loss in orthogonality between the carriers. DWT-OFDM can also support much higher spectrum efficiency than discrete Fourier-based OFDM (DFT-OFDM). In this paper the DFT-OFDM is replaced by Multiwavelets OFDM (DMWT-OFDM) in order to further reduce the level of interference and increase spectral efficiency. It is found that proposed Multiwavelet design achieves much lower bit error rates, increases signal to noise power ratio (SNR), and can be used as an alternative to the conventional OFDM. The proposed OFDM system was modeled tested, and its performance was found under different channel conditions.     

Design and optimization of LNA topologies with image rejection filters

An important problem in designing RFIC in CMOS technology is the parasitic elements of passive and active devices that complicate design calculations. This article presents three LNA topologies including cascode, folded cascade, and differential cascode and then introduces image rejection filters for low‐side and high‐side injection. Then, a new method for design and optimization of the circuits based on a Pareto‐based multiobjective genetic algorithm is proposed. A set of optimum device values and dimensions that best match design specifications are obtained. The optimization method is layout aware, parasitic aware, and simulation based. Circuit simulations are carried out based on TSMC 0.18 μm CMOS technology by using Hspice. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Estimation of magnitude and time duration of temporary overvoltages using ANN in transmission lines during power system restoration

In most countries, the main step in the process of power system restoration, following a complete/partial blackout, is energization of primary restorative transmission lines. Artificial neural network (ANN) is employed for performing a nonlinear input–output mapping in this work, in order to estimate the temporary overvoltages (TOVs) due to transmission lines energization. In the proposed methodology, Levenberg–Marquardt second order method is used to train the multilayer perceptron. Proposed ANN is trained with equivalent circuit parameters of the network as input parameters, trained ANN has therefore satisfactory generalization capability. Both single and three-phase line energizations are analyzed. The simulated results for 39-bus New England test system, indicate that the proposed technique can estimate the peak values and duration of switching overvoltages with acceptable accuracy.     

A parameter-tuned genetic algorithm for the resource investment problem with discounted cash flows and generalized precedence relations

A resource investment problem with discounted cash flows (RIPDCF) is a project-scheduling problem in which (a) the availability levels of the resources are considered decision variables and (b) the goal is to find a schedule such that the net present value of the project cash flows optimizes. In this paper, the RIPDCF in which the activities are subject to generalized precedence relations is first modeled. Then, a genetic algorithm (GA) is proposed to solve this model. In addition, design of experiments and response surface methodology are employed to both tune the GA parameters and to evaluate the performance of the proposed method in 240 test problems. The results of the performance analysis show that the efficiency of the proposed GA method is relatively well.     

On partial-information optimal singular control problem for mean-field stochastic differential equations driven by Teugels martingales measures

This paper is concerned with partial-information mixed optimal stochastic continuous–singular control problem for mean-field stochastic differential equation driven by Teugels martingales and an independent Brownian motion, where the Teugels martingales are a family of pairwise strongly orthonormal martingales associated with Lévy processes. The control variable has two components; the first being absolutely continuous, and the second singular. Partial-information necessary and sufficient conditions of optimal continuous–singular control for these mean-field models are investigated. As an illustration, this paper studies a partial-information linear quadratic control problem of mean-field type involving continuous–singular control.     

Evidence of short-range order in the disordered Cu-Ti alloys

Diffuse X-ray scattering measurements have been carried out on a series of Cu-Ti alloys, in order to determine the dependence of short-range order (SRO) parameters on the composition and annealing temperature. The diffuse scattering intensity (DSI) curves contain a maximum at the superstructural position 100 which provides evidence of SRO in this alloy. The degree of SRO has been estimated by calculating the Warren-Cowley parameter ₁ (WCP) and size-effect parameter ₁ from the DSI curves. The large negative values of WCP for all samples show the presence of heterogeneous SRO in these alloys. Comparison is also made between the values of experimental WCP and theoretical WCP calculated in the framework of electronic theory of short-range order and the high-temperature approximation of Clapp and Moss. A fairly good agreement between theory and experiment is observed.     

Three Dimensional Conceptualisation of Hydrogeological Environment to Underpin Groundwater Management in Irrigation Area

Australian irrigated agriculture utilises about 70?% of all water used in the country, 21?% of which is derived from groundwater. Sustainability for irrigated agriculture also depends on keeping the watertables at a safe level below the rootzone to avoid salinisation and reduction in crop yields. There is a vital need to understand groundwater and aquifer systems and their roles in the sustainability of irrigated agriculture in order to manage groundwater properly. This study builds on the previous hydrogeological and groundwater investigations of the Coleambally Irrigation Area (CIA) in New South Wales of Australia. It presents a new approach which systematically characterises regional hydrogeological environment using a three-dimensional (3-D) conceptual framework developed in ArcGIS. The 3-D hydrological conceptualisation of the CIA has integrated disparate sources of data into a coherent knowledge base for a better visualisation of hydrogeological characteristics and a comprehensive analysis of groundwater flow and aquifers. As an application example, the model was used to develop cross-sectional models of the area and to estimate regional-scale net recharge. The results have provided a basis for the numerical modelling and added values to procedures which underpin irrigation system management investment decisions through improving the understanding of hydrogeology underlying the area and creating an action-oriented dialogue among stakeholders.