Synthesis of Ferrocene-Based Hyperbranched Polyether and Its Catalytic Performance for Thermal Decomposition of Ammonium Perchlorate

A series of ferrocene-based hyperbranched polyethers (HBPE-Fc) with different ferrocene content were synthesized by esterification of ferrocenecarbonyl chloride and hyperbranched polyether (HBPE). ¹H NMR and FT-IR were used to confirm the structure of HBPE and HBPE-Fc. GPC was used to calculate the molecular weights. The catalytic performance of the synthesized HBPE-Fc for thermal decomposition of ammonium perchlorate (AP) was investigated by TG and DTG techniques. The results showed that HBPE-Fc exhibited good catalytic activity on the thermal decomposition of AP. The influence factors on catalytic performances, such as substitution degree of ferrocene and mass ratio of AP/HBPE-Fc were discussed as well.     

An analysis of construction productivity differences between Canada and the United States

Comparisons of industry sectors in advanced economies since the 1960s show that the construction sector has lagged in productivity growth rates, especially in the United States. Although the US and Canadian economies are highly integrated, Canada’s experience differs in key ways. Analysis of these differences offers insight into fundamental construction productivity drivers. Three levels of analyses of construction productivity in the US are provided in this study. The first analysis compared international levels of labour productivity growth. The second compared construction productivity between the US and Canada, and the third analysed cost estimating data from RS Means estimating manuals to measure the changes in labour and partial factor productivity in the US from 1995 to 2009. Statistical significance testing indicates that labour productivity remained nearly constant in the building sub-sector and that partial factor productivity has improved at an annual compound rate of 0.66%. This supports previous findings that US construction has stagnated but is still improving in Canada, with wage differentials and training systems as potential drivers of this difference. While growth rates of productivity seem to decline with higher absolute levels of productivity, there is no evidence that high absolute productivity levels preclude significant growth.     

Growth and characterization of Ni:DLC composite films using pulsed laser deposition technique

The structure and surface morphology of Ni-incorporated diamond like carbon (Ni:DLC) films have been investigated. These films were deposited on Si substrates using pulsed laser deposition (PLD) technique. A KrF Excimer laser (λ = 248 nm) was used for co-ablation from multi component Ni–graphite target. The concentration of Ni was varied by ablating the Ni part of the target with various numbers of laser pulses. The SEM and AFM analysis reveals that the surface is composed of segregates of Ni which increases with the increase in Ni content during the growth process. The structural investigations by XRD and Raman spectroscopy provided information about the orientation of the incorporated constituent and the ordering of the carbon species. Maximum height of the nano structures which were observed on the surface was ∼50 nm. The G-peak of the graphite was shifted towards higher wave number due to enhancement in SP² sites which have been increased due to the increase in the Ni concentration. A small change in the surface roughness ranging from 7.78 nm to 13.1 nm due to increased Ni concentration was also observed.     

pH-dependant structural and morphology evolution of Ni(OH)2 nanostructures and their morphology retention upon thermal annealing to NiO

Nickel hydroxide nanosheets, nanobelts and nanorods were prepared by hydrothermal treatment of the precipitates obtained at different pH values. The morphology and crystal structure of the products could be controlled simply by adjusting the pH value at precipitation. Interconnected nanosheets of hexagonal β-Ni(OH)₂ with thickness around 10–20 nm were formed at pH ∼ 11, whereas nanobelts with typical widths around 40–80 nm, and nanorods with diameters around 50–60 nm of phase pure α-Ni(OH)₂ containing intercalated sulphate ions were obtained in the pH range ∼9.5–8.5. Thermal annealing of the hydroxides at 500 °C yielded cubic phase NiO with morphologies similar to their hydroxide precursors. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and energy dispersive X-ray (EDX) analysis were used to characterize the as-prepared products. The role of pH in controlling the phase and morphology of the products was discussed.     

An Efficient,Scalable Key Transport Scheme (ESKTS) for Delay/Disruption Tolerant Networks

In the past, security protocols including key transport protocols are designed with the assumption that there are two parties communication with each other and an adversary tries to intercept this communication. In Delay/Disruption Tolerant Networking (DTN), packet delivery relies on intermediate parties in the communication path to store and forward the packets. DTN security architecture requires that integrity and authentication should be verified at intermediate nodes as well as at end nodes and confidentiality should be maintained for end communicating parties. This requires new security protocols and key management to be defined for DTN as traditional end-to-end security protocols will not work with DTN. To contribute towards solving this problem, we propose a novel Efficient and Scalable Key Transport Scheme (ESKTS) to transport the symmetric key generated at a DTN node to other communicating body securely using public key cryptography and proxy signatures. It is unique effort to design a key transport protocol in compliance with DTN architecture. ESKTS ensures that integrity and authentication is achieved at hop-by-hop level as well as end-to-end level. It also ensures end-to-end confidentiality and freshness for end communicating parties. This scheme provides a secure symmetric key transport mechanism based on public key cryptography to exploit the unique bundle buffering characteristics of DTN to reduce communication and computation cost .     

Improving security of the Internet of Things via RF fingerprinting based device identification system

Neural Computing and Applications - Security is one of the primary concerns when designing wireless networks. Along detecting user identity, it is also important to detect the devices at the...     

Reviewing the world's edible mushroom species: A new evidence-based classification system

Wild mushrooms are a vital source of income and nutrition for many poor communities and of value to recreational foragers. Literature relating to the edibility of mushroom species continues to expand, driven by an increasing demand for wild mushrooms, a wider interest in foraging, and the study of traditional foods. Although numerous case reports have been published on edible mushrooms, doubt and confusion persist regarding which species are safe and suitable to consume. Case reports often differ, and the evidence supporting the stated properties of mushrooms can be incomplete or ambiguous. The need for greater clarity on edible species is further underlined by increases in mushroom-related poisonings. We propose a system for categorizing mushroom species and assigning a final edibility status. Using this system, we reviewed 2,786 mushroom species from 99 countries, accessing 9,783 case reports, from over 1,100 sources. We identified 2,189 edible species, of which 2,006 can be consumed safely, and a further 183 species which required some form of pretreatment prior to safe consumption or were associated with allergic reactions by some. We identified 471 species of uncertain edibility because of missing or incomplete evidence of consumption, and 76 unconfirmed species because of unresolved, differing opinions on edibility and toxicity. This is the most comprehensive list of edible mushrooms available to date, demonstrating the huge number of mushrooms species consumed. Our review highlights the need for further information on uncertain and clash species, and the need to present evidence in a clear, unambiguous, and consistent manner.     

The effect of di-2-ethylhexyl phthalate on the thermo-oxidative ageing of poly(vinyl chloride)/epoxidized natural rubber blends

The effect of di-2-ethylhexyl phthalate (DOP) plasticizer on the degradation behaviour of 50/50 poly(vinyl chloride)/epoxidized natural rubber (PVC/ENR) blend was studied by long-term exposure to ambient conditions (27–30°C) in the laboratory. While the unplasticized blend showed obvious changes in physical properties such as hardening, loss of elasticity and embrittlement, the plasticized blend retained its properties. Thermo-oxidative ageing studies were carried out by evaluating the mechanical properties before and after ageing in an air oven at 80°C for 168 h. The relatively rapid degradation of PVC/ENR blend has been attributed to the high concentration of epoxy groups and the occurrence of ring-opening reactions to form ether crosslinks. It was found that the plasticizer confers adequate stabilization upon the addition of a certain threshold amount. The optimum amount of plasticizer required to adequately stabilize the blend is 20 phr. Above this there is a tendency for plasticizer migration to occur. The use of an antioxidant in conjunction with the plasticizer further stabilizes the blend. The general trend is of decrease in mechanical and physical properties with increase in DOP concentration. In addition, ease of processing also increases as indicated by the torque maxima and minima obtained from the Brabender plastograms.