Scientific and technological performance evaluation of the Spanish Council for Scientific Research (CSIC) in the field of Biotechnology

An evaluation of the Spanish CSIC performance in Biotechnology, as compared with those of the French CNRS and the Italian CNR, has been carried out to determine the balance between the generation of scientific knowledge and the transfer of technology. This study shows a high scientific productivity mostly in journals with moderate impact factor, a low generation of patents and an insufficient transfer of knowledge to the Spanish companies. Other indicators confirm the existence of competitive human resources in biotechnological research producing scientific knowledge of interest for the development of patents and that cooperates successfully at European level.     

Metric analysis of the information visibility and diffusion about the European Higher Education Area on Spanish University websites

The purpose of the study proposed in this paper is to evaluate the Spanish public university websites dedicated to the European Higher Education Area (EHEA). To do so, the quality of these resources has been analysed in the light of data provided by a series of indicators grouped in seven criteria, most of which were used to determine what information is made available and in what way. The criteria used in our analysis are: visibility, authority, updatedness, accesibility, correctness and completeness, quality assessment and navigability. All in all, the results allow us to carry out an overall diagnosis of the situation and also provide us with information about the situation at each university, thus revealing their main strengths, namely authority and navegability, and also their chief shortcomings: updatedness, accessibility and quality assessment. In this way it is possible to detect the best practices in each of the aspects evaluated so that they can serve as an example and guide for universities with greater deficiencies and thus help them to improve their EHEA websites.     

Residual fracture energy of high-performance and normal concrete subject to high temperatures

Test data on the residual fracture energy of two significantly different concrete types are presented. About 80 beams of high performance basalt concrete and ordinary gravel concrete have been tested in accordance with the RILEM work of fracture method. The beams are heated at 1°C per minute up to a certain maximum temperature and kept at this temperature for 8 hours before cooling them back to room temperature and testing in three-point bending. The tests show that the two concretes behave almost identifical when the fracture energyG _F is considered as a function of maximum temperature. It is found that the damage introduced by a maximum temperature of 300 to 400°C increases the fracture energy by 50% compared with the reference tests at room temperature. A more tortuous crack surface is one plausible explanation for the significant increase inG _F. The article also presents temperature and weight loss recordings from the heating scenarios and finally, the characteristic length and the cohesive tensile softening curve are shown to depend on the maximum temperature. Basically it is demonstrated that the temperature exposure makes the concrete significantly more ductile.

---

Résumé Des données sur l'énergie résiduelle de rupture de deux bétons différents sont présentées. Environ 80 poutres de béton à base de basalte de très haute performance et de béton à base de gravier ordinaire ont été examinées conformément au travaux de la RILEM sur l'énergie de rupture. Les poutres sont chauffées à 1°C par minute jusqu'à une température maximale, puis maintenues à cette température pendant 8 heures avant d'être refroidies de nouveau à la température ambiante. Les poutres sont ensuite testées en flexion (système de flexion en trois points). Les essais prouvent que les deux bétons se comportent d'une manière presque identique quandG _F est considéré comme une fonction de la température maximale. On peut aussi constater que le dommage occasionné par une température maximale de 300 à 400°C augmente l'énergie de rupture de 50% par comparaison aux essais de référence réalisés à la température ambiante. Une surface de rupture plus tortueuse semble être une explication plausible pour l'augmentation significative deG _F. L'article présente également les évolutions de la température et de la perte de poids pour les scénarios de chauffage utilisés. En conclusion, cette étude montre que la longueur caractéristique et la courbe de post pic dépendent de la température maximale. Fondamentalement cela démontre que l'exposition à la température rend le béton sensiblement plus ductile.

     

Effect of Crude Oil Composition and Blending on Flowing Properties

The effect of crude oil n-paraffin molecular weight distribution on wax crystallization risk was studied. Sixteen highly paraffinic crude oils from Eastern Venezuela were characterized, in terms of hydrocarbon family distribution, by High Temperature Simulate Distillation (HTSD), Gel Permeation Chromatography (GPC), and wax content. n-Paraffin chain length was correlated with crude oil cloud point and pour point. It was demonstrated that high molecular weight linear paraffins are responsible for crude oil wax precipitation. A quantitative correlation between molecular weight distribution and crude oil flowing properties was also obtained. It was found that the wider the molecular weight distribution, the lower is the wax crystallization risk. Blends of different paraffinic crude oils were prepared and their flowing properties were evaluated in comparison with the original crudes. Cloud points below the mean value were obtained. In some cases, a synergistic effect was observed (cloud points below the minimum of the two crude oils). Blends of some of these crudes with condensates afforded improvements on crude oil flow and a reduction of wax crystallization tendency (cloud point). This phenomenon can be attributed to a combination of two factors: I. increases in C24-n-paraffins, and II. a wider molecular weight distribution.     

Changes in polymer foils used in food packaging tested by using differential scanning calorimetry

This work is an experimental study of the differential scanning calorimetry characterisation of polymer materials used in food packaging materials, such as polypropylene (0.03 mm), polyethylene (0.1 and 0.03 mm), poly(D-(-)-Β-hydroxybutyrate) (powder), two-layered polypropylene (0.064 mm), and two-layered polypropylene with poly-vinylidene-chloride (0.012/0.021). The polymer stability was checked by simulation of conditions during food preparation in microwave ovens, sterilisation or rapid freezing. The materials were tested in the temperature range from 40 to 200‡C at different scan rates from 2 to 30°C min⁻¹ during heating or cooling. The enthalpies show a high correlation coefficient (0.964) with scan rate. All samples undergo phase change in the temperature range from 107 to 173°C during heating and enthalpies are in the range from 31.8 to 71.1Jg⁻¹. Upon subsequent cooling from 200°C, the temperature range of phase changes is shifted to lower temperatures from 86 to 102°C with enthalpies ranging from 30.4 to 57.8 J g⁻¹. Experiments with exposure of polymers to microwave radiation and freezing prove that the phase change considering the temperature range is very similar in all experiments.     

Low temperature and strain rate dependence of fracture stress and fracture toughness on thin Fe40Ni40B20 amorphous ribbon

The fracture stress and the critical stress intensity factor of the Fe₄₀Ni₄₀B₂₀ amorphous metallic ribbons 20 μm thick were measured in the temperature range 4.2–300 K and at deformation rates from 3.3×10⁻⁶ to 1.25×10⁻³ m⁻¹ with the aim to obtain more information on the condition for the onset and development of the inhomogeneous plastic deformation and fracture.     

Decision support for AIDS control programmes in Eastern Africa

The Acquired Immune Deficiency Syndrome (AIDS) constitutes the worst hazard to health care systems in Eastern Africa. Misallocation of scarce resources of AIDS Control Programmes will unavoidably lead to additional infections and casualties. The following paper discusses a system dynamics model which allows to assess the impact of different interventions on a pattern population in Eastern Africa. It becomes obvious that short- and long-term consequences of these programmes differ significantly. The optimal allocation of resources, therefore, is highly complex and calls for decision support systems to sustain AIDS control programmes.     

Vortices in anisotropic type-II superconductors

We present a generalized variational model of an isolated vortex, valid in the anisotropic case when the external magnetic field is along one of the symmetry directions. We discuss the effects of the field anisotropy on the core and magnetic pinning of individual vortices.     

Perceptual primitives from an extended 4D Hough transform

Directional features extracted from Gabor wavelets responses were used to train a structure of self-organising maps, thus classifying each pixel in the image within a neuron-map. Resulting directional primitives were grouped into perceptual primitives introducing an extended 4D Hough transform to group pixels with similar directional features. These can then be used as perceptual primitives to detect salient structures. The proposed method has independently fixed parameters that do not need to be tuned for different kind or quality of images. We present results in application to noisy FLIR images and show that line primitives for complex structures, such as bridges, or simple structures, such as runways, can be found by this approach. We compare and demonstrate the quality of our results with those obtained through a parameter-dependent traditional Canny edge detector and Hough line finding process.     

Deep oxidation of VOC mixtures with platinum supported on Al2O3/Al monoliths

Pt impregnated metallic monoliths prepared from anodised aluminium foils were tested to study their catalytic activity in complete oxidation of volatile organic compound (VOC) mixtures. The VOCs oxidised were 2-propanol, toluene, methyl ethyl ketone (MEK), acetone and their mixtures. Complete oxidation was obtained in all cases except for the case of 2-propanol, where acetone was found as an oxidation intermediate. Even if the adsorption of the VOC on the Al₂O₃ is governed by its polarity, the reactivity is mainly affected by the competition of the oxygen atoms chemisorbed on the Pt particles.