Effect of physical properties on the stability of Lactobacillus bulgaricus in a freeze-dried galacto-oligosaccharides matrix

The ability of galacto-oligosaccharides (GOS) to protect Lactobacillus delbrueckii subsp. bulgaricus upon freeze drying was analyzed on the basis of their capacity to form glassy structures. Glass transition temperatures (T(g)) of a GOS matrix at various relative humidities (RH) were determined by DSC. Survival of L. bulgaricus in a glassy GOS matrix was investigated after freezing, freeze drying, equilibration at different RHs and storage at different temperatures. At 32 °C, a drastic viability loss was observed. At 20 °C, the survival was affected by the water content, having the samples stored at lower RHs, the highest survival percentages. At 4°C, no decay in the cells count was observed after 45 days of storage. The correlation between molecular mobility [as measured by Proton nuclear magnetic resonance (1H NMR)] and loss of viability explained the efficiency of GOS as cryoprotectants. The preservation of microorganisms was improved at low molecular mobility and this condition was obtained at low water contents and low storage temperatures. These results are important in the developing of new functional foods containing pre and probiotics.     

Determination of ochratoxin A in wines by capillary liquid chromatography with laser induced fluorescence detection using dispersive liquid-liquid microextraction

A method based on reverse phase capillary high performance liquid chromatography (capillary HPLC) coupled to laser-induced fluorescence detection (LIF) has been proposed for the determination of ochratoxin A (OTA) in wine samples. An anionic micellar medium was added to the mobile phase for increasing the fluorescence intensity and peak efficiency. Dispersive liquid-liquid microextraction (DLLME) has been used as a simple and efficient sample pretreatment method for the analysis of OTA in wines, being optimised by means of experimental design. The limit of detection was 5.5 ng L(-1) (3 × S/N) and recoveries for different wines ranged from 91.7 to 98.1%. The proposed methodology could be classified as a green analytical chemistry alternative, combining the low organic solvent volumes required in the DLLME with the reduced consumption of mobile phase in capillary HPLC. The use of LIF as detector provided an extremely sensitive method for the determination of OTA in wines.     

Breeding of lager yeast with Saccharomyces cerevisiae improves stress resistance and fermentation performance

Lager beer brewing relies on strains collectively known as Saccharomyces carlsbergensis, which are hybrids between S. cerevisiae and S. eubayanus‐like strains. Lager yeasts are particularly adapted to low‐temperature fermentations. Selection of new yeast strains for improved traits or fermentation performance is laborious, due to the allotetraploid nature of lager yeasts. Initially, we have generated new F1 hybrids by classical genetics, using spore clones of lager yeast and S. cerevisiae and complementation of auxotrophies of the single strains upon mating. These hybrids were improved on several parameters, including growth at elevated temperature and resistance against high osmolarity or high ethanol concentrations. Due to the uncertainty of chromosomal make‐up of lager yeast spore clones, we introduced molecular markers to analyse mating‐type composition by PCR. Based on these results, new hybrids between a lager and an ale yeast strain were isolated by micromanipulation. These hybrids were not subject to genetic modification. We generated and verified 13 hybrid strains. All of these hybrid strains showed improved stress resistance as seen in the ale parent, including improved survival at the end of fermentation. Importantly, some of the strains showed improved fermentation rates using 18°Plato at 18–25°C. Uniparental mitochondrial DNA inheritance was observed mostly from the S. cerevisiae parent. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermal and Combustion Properties of 3,4‐Bis(3‐nitrofurazan‐4‐yl)furoxan (DNTF)

Thermal decomposition of melted 3,4‐bis(3‐nitrofurazan‐4‐yl)furoxan (DNTF) in isothermal conditions was studied. The burning rates of DNTF were measured in the pressure interval of 0.1–15 MPa. The thermal stability of DNTF was found to be close to the stability of HMX, while the burning rate of DNTF was close to the burning rate of CL‐20. The thermocouple measurements in the combustion wave of DNTF showed that combustion of DNTF was controlled by the gas‐phase mechanism. The DNTF vapor pressure was determined from thermocouple measurements and agreed well with data obtained at low temperatures under isothermal conditions.     

Antibacterial Activity and Physical Properties of Edible Chitosan Films Exposed to Low-pressure Plasma

The challenge for food industry is developing gentle processes concept, which will prevent food spoilage and leave a food natural, minimally processed, fresh-like and safe. A new technique of food preservation could be usage of combined methods of green process, such as cold gas plasma with bioactive substances, and protective coatings. The aim of this study was to determine the antibacterial activity of chitosan films incorporated with lysozyme exposed to helium plasma treatment as well as evaluate their physical properties. The edible films have been prepared basing on low molecular weight chitosan by casting from lactic acid solution with water solution of lysozyme in three various concentrations (0, 0.5 and 1 %). Dried films were then modified by exposition on cold helium plasma treatment for 0, 5 and 10 min. Obtained films were tested against growth of Listeria monocytogenes, Yersinia enterocolitica and Pseudomonas fluorescens. In order to characterize chitosan-based films, their mechanical properties, theromogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA), contact angle measurement, water vapour permeability (WVP) and scanning electron microscopy (SEM) were evaluated. The films with 1 % lysozyme incorporation enhanced the inhibition efficiency of chitosan-based films against gram-positive (L. monocytogenes) and gram-negative (P. fluorescens) bacteria, where reduction zones were 42.5 and 69.8 mm, respectively. Besides that, hydrolytic changes of chitosan chain caused by lysozyme activity were confirmed by TGA and DMTA. Contact angles and WVP of tested films were not significantly affected by helium plasma exposition, nor lysozyme dosage. Hydrophilic natures of chitosan-based films were confirmed by both tests. Microscopy image of cross-section structure was smooth and continuous due to lysozyme addition in film composition. Application of chitosan films incorporated with lysozyme and low-pressure plasma treatment could be used as innovative preservation method in a wide range of food products.     

Optimisation of an analytical method and results from the inter-laboratory comparison of the migration of regulated substances from food packaging into the new mandatory European Union simulant for dry foodstuffs

This paper presents the outcome of the development, optimisation and validation at European Union level of an analytical method for using poly(2,6-diphenyl phenylene oxide – PPPO), which is stipulated in Regulation (EU) No. 10/2011, as food simulant E for testing specific migration from plastics into dry foodstuffs. Two methods for fortifying respectively PPPO and a low-density polyethylene (LDPE) film with surrogate substances that are relevant to food contact were developed. A protocol for cleaning the PPPO and an efficient analytical method were developed for the quantification of butylhydroxytoluene (BHT), benzophenone (BP), diisobutylphthalate (DiBP), bis(2-ethylhexyl) adipate (DEHA) and 1,2-cyclohexanedicarboxylic acid, diisononyl ester (DINCH) from PPPO. A protocol for a migration test from plastics using small migration cells was also developed. The method was validated by an inter-laboratory comparison (ILC) with 16 national reference laboratories for food contact materials in the European Union. This allowed for the first time data to be obtained on the precision and laboratory performance of both migration and quantification. The results showed that the validation ILC was successful even when taking into account the complexity of the exercise. The results showed that the method performance was 7–9% repeatability standard deviation (rSD) for most substances (regardless of concentration), with 12% rSD for the high level of BHT and for DiBP at very low levels. The reproducibility standard deviation results for the 16 European Union laboratories were in the range of 20–30% for the quantification from PPPO (for the three levels of concentrations of the five substances) and 15–40% from migration experiments from the fortified plastic at 60°C for 10 days and subsequent quantification. Considering the lack of data previously available in the literature, this work has demonstrated that the validation of a method is possible both for migration from a film and for quantification into a corresponding simulant for specific migration.     

The potential of volatile organic compound analysis in cervicovaginal mucus to predict estrus and ovulation in estrus-synchronized heifers

Cervicovaginal mucus is a mixture of mucins, ions, salts, and water, the proportions of which change during the reproductive cycle. It is suspected that this mucus emits an important volatile signal indicative of the reproductive state of the female. The objective of this study was to identify volatile organic compounds (VOC) in bovine cervicovaginal mucus that are modulated during the estrous cycle and could potentially be used as biomarkers of estrus and ovulation. Cervicovaginal mucus was collected from crossbred beef heifers (n = 8), which were synchronized using an 8-d controlled internal drug release (CIDR) protocol and in which onset of estrus and time of ovulation were determined by visual observation and ultrasonography, respectively. Mucus samples were collected between 0 and 96 h after CIDR removal (estrus onset occurred at 49.1 ± 3.3 h after CIDR removal). A validation study was performed on an independent group of 15 heifers from which cervicovaginal mucus samples were collected every 8 h from 40 to 80 h after CIDR removal. The VOC in mucus were identified using gas chromatography-mass spectrometry and selected compounds were quantified using selected-ion flow-tube mass spectrometry. The presence of 47 VOC was detected in mucus samples by gas chromatography-mass spectrometry with those exhibiting highest abundance including 2-butanone, acetone, 2-pentanone, 4-methyl-2-pentanone, 1-(1-methylethoxy)-2-propanone, ethanol, 2-methyl-2-propanol, and 2-butanol. All VOC peaked between 24 to 47 h after the onset of estrus (ovulation occurred 26.6 ± 5.6 h after estrus onset). Two VOC, 2-pentanone and 4-methyl-2-pentanone, exhibited a significant increase at the onset of estrus, whereas concentration of 2-butanone increased significantly just after estrus onset, indicating that these VOC may be used as putative biomarkers of estrus. The results of our study may contribute to the development of a sensor device based on VOC to aid the detection of estrus and ovulation in cattle, with particular relevance for the dairy industry where the majority of females are bred by artificial insemination.     

Acoustic vibrations of metal-dielectric core-shell nanoparticles

The acoustic vibrations of metal nanoparticles encapsulated in a dielectric shell (Ag@SiO(2)) were investigated using a time-resolved femtosecond technique. The measured vibration periods significantly differ from those predicted for the bare metal cores and, depending on the relative core and shell sizes, were found to be either larger or smaller than them. These results show that the vibration of the whole core-shell particle is excited and detected. Moreover, vibrational periods are in excellent agreement with the predictions of a model based on continuum thermoelasticity. However, such agreement is obtained only if a good mechanical contact of the metal and dielectric parts of the core-shell particle is assumed, providing a unique way to probe this contact in multimaterial or hybrid nano-objects.