Adoption of Rainwater Harvesting: a Dual-factor Approach by Integrating Theory of Planned Behaviour and Norm Activation Model

The objective of the study is to identify the factors that lead to the adoption of rainwater harvesting in enabling sustainable ground water. The Theory of Planned Behavior and Norm Activation Model has been adopted. The sample consists of 400 participants who were either constructing and likely to construct houses have been considered for the study. Structural Equation Modelling was used to analyze the data. The study results exhibited the adoption of rainwater harvesting, and the moderation effect of intention to acquire rainwater harvesting knowledge on the relationship between environmental concern; environmental responsibility and rainwater harvesting. Based on the results, significant theoretical and practical implications have been made.

     

Expression of Aspergillus nidulans phy Gene in Nicotiana benthamiana Produces Active Phytase with Broad Specificities

A full-length phytase gene (phy) of Aspergillus nidulans was amplified from the cDNA library by polymerase chain reaction (PCR), and it was introduced into a bacterial expression vector, pET-28a. The recombinant protein (rPhy-E, 56 kDa) was overexpressed in the insoluble fraction of Escherichia coli culture, purified by Ni-NTA resin under denaturing conditions and injected into rats as an immunogen. To express A. nidulans phytase in a plant, the full-length of phy was cloned into a plant expression binary vector, pPZP212. The resultant construct was tested for its transient expression by Agrobacterium-infiltration into Nicotiana benthamiana leaves. Compared with a control, the agro-infiltrated leaf tissues showed the presence of phy mRNA and its high expression level in N.benthamiana. The recombinant phytase (rPhy-P, 62 kDa) was strongly reacted with the polyclonal antibody against the nonglycosylated rPhy-E. The rPhy-P showed glycosylation, two pH optima (pH 4.5 and pH 5.5), an optimum temperature at 45~55 °C, thermostability and broad substrate specificities. After deglycosylation by peptide-N-glycosidase F (PNGase-F), the rPhy-P significantly lost the phytase activity and retained 1/9 of the original activity after 10 min of incubation at 45 °C. Therefore, the deglycosylation caused a significant reduction in enzyme thermostability. In animal experiments, oral administration of the rPhy-P at 1500 U/kg body weight/day for seven days caused a significant reduction of phosphorus excretion by 16% in rat feces. Besides, the rPhy-P did not result in any toxicological changes and clinical signs.     

High-efficiency Silicon Solar Cells: A Review

Over the past few decades, crystalline silicon solar cells have been extensively studied due to their high efficiency, high reliability, and low cost. In addition, these types of cells lead the industry and account for more than half of the market. For the foreseeable future, Si will still be a critical material for photovoltaic devices in the solar cell industry. In this paper, we discuss key issues, cell concepts, and the status of recent high-efficiency crystalline silicon solar cells.     

Travelling-wave photodetectors with 172-GHz bandwidth and 76-GHzbandwidth-efficiency product

Results of the first fabrication and measurement of travelling-wave photodetectors are reported. The devices have bandwidths as high as 172 GHz, the highest reported for a p-i-n photodetector, and bandwidth-efficiency products as large as 76 GHz, the largest reported for any photodetector without gain. Comparisons with vertically illuminated and waveguide photodetectors fabricated on the same wafer establish the superior performance of travelling-wave photodetectors. Microwave loss on the travelling-wave photodetector structure is identified as a bandwidth limitation     

Evidence for compliance controlled oxygen vacancy and metal filament based resistive switching mechanisms in RRAM

We present electrical evidence on asymmetric metal-insulator-semiconductor (MIS) based test structures in support of the presence of two different independent switching mechanisms in a resistive random access memory (RRAM) device. The valid mechanism for switching depends on the compliance capping (I_gl) for forming/SET transition. Our results convincingly show that low compliance based switching only involves reversible oxygen ion drift to and from oxygen gettering gate electrodes, while high compliance switching involves formation and rupture of conductive metallic nanofilaments, as verified further by our physical analysis investigations. We have observed this unique dual mode switching mechanism only in NiSi-based gate electrodes, which have a moderate oxygen solubility as well as relatively low melting point.     

Theoretical modeling of iodine value and saponification value of biodiesel fuels from their fatty acid composition

Biodiesel is an alternative fuel consisting of alkyl esters of fatty acids from vegetable oils or animal fats. The properties of biodiesel depend on the type of vegetable oil used for the transesterification process. The objective of the present work is to theoretically predict the iodine value and the saponification value of different biodiesels from their fatty acid methyl ester composition. The fatty acid ester compositions and the above values of different biodiesels were taken from the available published data. A multiple linear regression model was developed to predict the iodine value and saponification value of different biodiesels. The predicted results showed that the prediction errors were less than 3.4% compared to the available published data. The predicted values were also verified by substituting in the available published model which was developed to predict the higher heating values of biodiesel fuels from their iodine value and the saponification value. The resulting heating values of biodiesels were then compared with the published heating values and reported.     

The effect of ternary addition of silicon on the structure and microstructure of rapidly solidified equiatomic TiNi alloys

The influence of a small amount of silicon (up to 6 at %) on the structure and microstructure of rapidly solidified equiatomic TiNi alloys is reported. It is shown that a small amount of silicon suppresses the B2 TiNi formation and promotes a competitive nucleation of Ti2Ni phase. Further additions of silicon promote the formation of glass. The behaviour of the ternary replacement of both titanium and nickel by silicon has been studied. It is shown that replacement of titanium increases the tendency for the formation of silicide phases while the latter is absent when silicon replaces the nickel atoms. This revised version was published online in November 2006 with corrections to the Cover Date.