Error evaluation on experimental stress–strain curve obtained from tube bulging test

To get precise material data for advanced numerical modelling of tube hydroforming process, the tube bulging test is recommended. Stresses and strains in the tube cannot be evaluated easily and several approaches have been proposed. A review is proposed and points out their advantages and drawbacks.     

In-Situ Analyzing the Influence of Thermoelectromagnetic Convection on the Nucleation Ahead of the Advancing Interface During Directional Solidification

Sn-3wt%Pb alloy was directionally solidified without and with a 0.08T transverse magnetic field(TMF),and real-time recorded by in-situ synchrotron X-ray imaging.Results indicate that TMF shortened the distance from the location of nucleation to the advancing interface,and accelerated the growth rate of the equiaxed crystal,which caused the columnar-to-equiaxed transition(CET)finally.The thermoelectromagnetic convection(TEMC)in front of the interface and around the crystal’s dendritic branch should respond to changes of the distance and the growth rate.     

Nanometric Scale Investigation of Phase Transformations in Advanced Steels for Automotive Application

The current trend toward producing lighter vehicles in the automotive industry is driven by the need to conform to the new exhaust emission control regulations. This objective presents a challenge to steel manufacturers. The difficulty lies in designing new alloys with an optimum strength/formability/cost balance for the various components. Here, the key to success lies in controlling the steel microstructure and especially the phase transformations at the smallest possible scale. Among the different alloying elements, light elements such as carbon and boron are of prime importance due to their major effects on the kinetics of phase transformations. Characterization tools combining high spatial and analytical resolution such as secondary ion mass spectrometry (SIMS) and field emission gun-transmission electron microscopy (TEM) were used. In this article, the examples presented are as follows. (1) Boron segregation and precipitation effects to control hardenability in martensitic steels. (2) Local carbon distribution in advanced high-strength steels, with a specific emphasis on martensite tempering. Links have been established between the boron and carbon distribution and the formability.     

Thermal Resonance at the Microscale in AC Scanning Thermal Microscopy with a Thermal-Resistive Probe

Investigation of the thermal-resistive probe response in an AC scanning thermal microscope (SThM) as a function of the distance probe–material surface under ambient conditions and the current excitation frequency is presented. The analysis of temperature experimental results points out a phenomenon which can be interpreted as a thermal wave resonance. The modeling of the thermal response with the finite element method considering the surrounding medium as a thermally conducting medium tends to confirm this. This phenomenon is independent of the sample nature and is related to the thermal diffusion length of the air medium between the probe and the sample. An equivalent resonance factor is defined: it shows a linear dependence with the characteristic distance for which the thermal resonance phenomenon is an extremum. The system—probe/sample surface—behaves as a resonant cavity at the microscale. This configuration is not specific to a SThM and can occur within electronic devices.     

Individual and area socioeconomic inequalities in cause-specific unintentional injury mortality: 11-Year follow-up study of 2.7 million Canadians

This study investigated the association between individual and area socioeconomic status (SES) and leading causes of unintentional injury mortality in Canadian adults. Using the 1991–2001 Canadian Census Mortality Follow-up Study cohort (N = 2,735,152), Cox proportional hazard regression was used to calculate hazard ratios and 95% confidence intervals for all-cause unintentional injury, motor vehicle collision (MVC), fall, poisoning, suffocation, fire/burn, and drowning deaths. Results indicated that associations with SES differed by cause of injury, and were generally more pronounced for males. Low education was associated with an elevated risk of mortality from all-cause unintentional injury and MVC (males only) and poisoning and drowning (both sexes). Low income was strongly associated with most causes of injury mortality, particularly fire/burn and poisoning. Having no occupation or low occupational status was associated with higher risks of all-cause injury, fall, poisoning and suffocation (both sexes) and MVC deaths among men. Associations with area deprivation were weak, and only areas with high deprivation had elevated risk of all-cause injury, MVC (males only), poisoning and drowning (both sexes). This study reveals the importance of examining SES differentials by cause of death from a multilevel perspective. Future research is needed to clarify the mechanisms underlying these differences to implement equity-oriented approaches for reducing differential exposures, vulnerability or consequences of injury mortality.     

Individual cell lag time distributions of Cronobacter (Enterobacter sakazakii) and impact of pooling samples on its detection in powdered infant formula

Cells of six strains of Cronobacter were subjected to dry stress and stored for 2.5 months at ambient temperature. The individual cell lag time distributions of recovered cells were characterized at 25 °C and 37 °C in non-selective broth. The individual cell lag times were deduced from the times taken by cultures from individual cells to reach an optical density threshold. In parallel, growth curves for each strain at high contamination levels were determined in the same growth conditions. In general, the extreme value type II distribution with a shape parameter fixed to 5 (EVIIb) was the most effective at describing the 12 observed distributions of individual cell lag times. Recently, a model for characterizing individual cell lag time distribution from population growth parameters was developed for other food-borne pathogenic bacteria such as Listeria monocytogenes. We confirmed this model’s applicability to Cronobacter by comparing the mean and the standard deviation of individual cell lag times to populational lag times observed with high initial concentration experiments. We also validated the model in realistic conditions by studying growth in powdered infant formula decimally diluted in Buffered Peptone Water, which represents the first enrichment step of the standard detection method for Cronobacter. Individual lag times and the pooling of samples significantly affect detection performances.     

In vitro comparisons between Carica papaya and pancreatic lipases during test meal lipolysis: Potential use of CPL in enzyme replacement therapy

High levels of lipase activity are known to occur in Carica papaya latex, and this activity is being used in some biotechnological applications. The lipolytic activity of C. papaya lipase (CPL) on dietary triacylglycerols (TAG) has not yet been studied. Hence, the aim of this study was to characterise the specific activity of CPL on dietary TAG present in a crude preparation. Also, we have determined its stability during the lipolysis of a test meal at various pH values mimicking those occurring in the gastro-intestinal tract, with or without bile, and have compared these properties with those of porcine pancreatic extract (PPE) and human pancreatic lipase (HPL). CPL showed maximum stability at pH 6.0, both with and without bile. Some residual activity was still observed at pH 2 (20%), whereas the pancreatic lipases tested were immediately completely inactivated at this pH. In the absence of bile, the highest specific activities were measured at pH 6 in the case of CPL, PPE and HPL. Adding bile slightly decreased the CPL activity in the 4–6 pH range, thus shifting the optimum CPL activity to pH 7, where the presence of bile had no effect. Lipolysis levels decreased with the pH, but CPL was still more active than PPE at pH 5 on a relative basis. These results suggest that CPL might be a promising candidate for use as a therapeutic tool on patients with pancreatic exocrine insufficiency.