The Graham-Knowlton Problem Revisited

In the late 60s Graham and Knowlton introduced the WIP (wire identification problem) that affected electricians: match the wires in the ceiling to those in the basement while making the fewest trips. We revisit this problem and study its variants and generalizations; we provide a combinatorial characterization of the solution(s) in terms of an associated hypergraph and obtain nearly tight bounds on the minimum number of trips.     

Reachable set of bilinear control systems with time varying drift

In this article, we give a complete characterization of the reachable set at all times for a class of bilinear control systems with time varying drift and unbounded control amplitude. These results are of fundamental interest in geometric control theory and have important applications to control of coupled spins in solid state NMR spectroscopy.     

Synthesis and electroluminescence properties of zinc(2,2′ bipyridine)8-hydroxyquinoline

New electroluminescent material, namely zinc(2,2′ bipyridine)8-hydroxyquinoline [Zn(Bpy)q] has been synthesized and characterized. A solution of Zn(Bpy)q showed absorption maxima at 382 nm and 342 nm in toluene solution attributed to π − π transition. The photoluminescence spectrum in toluene solution showed peak at 545 nm. The material was stable up to 350 °C. Organic light emitting diode (OLED) fabricated with the structure ITO/α-NPD/Zn(Bpy)q/Alq₃/LiF/Al exhibits a broad electroluminescence peak at 548 nm. The maximum current efficiency of OLED was 1.34 cd/A at 5 V and the maximum power efficiency 0.84 lm/W at 5 V.     

Decolorization and COD reduction of dyeing wastewater from a cotton textile mill using thermolysis and coagulation

The decolorization and reduction of COD of dyeing wastewater from a cotton textile mill was conducted using catalytic thermal treatment (thermolysis) accompanied with/without coagulation. Thermolysis in presence of a homogeneous copper sulphate catalyst was found to be the most effective in comparison to other catalysts (FeCl(3), FeSO(4), CuO, ZnO and PAC) used. A maximum reduction of chemical oxygen demand (COD) and color of dyeing wastewater of 66.85% and 71.4%, respectively, was observed with a catalyst concentration of 5 kg/m(3) at pH 8. Commercial alum was found most effective coagulant among various coagulants (aluminum potassium sulphate, PAC, FeCl(3) and FeSO(4)) tested during coagulation operations, resulting in 58.57% COD and 74% color reduction at pH 4 and coagulant dose of 5 kg/m(3). Coagulation of the clear fluid (supernatant) obtained after treatment by thermolysis at the conditions previously used resulted in an overall reduction of 89.91% COD and 94.4% color at pH 4 and a coagulant dose of 2 kg/m(3). The application of thermolysis followed by coagulation, thus, is the most effective treatment method in removing nearly 90% COD and 95% color at a lower dose of coagulant (2 kg/m(3)). The sludge thus produced would contain lower inorganic mass coagulant and, therefore, less amount of inorganic sludge.     

Removal of lead from aqueous solution by hybrid precursor prepared by rice hull

Use of low-cost hybrid precursor, prepared from rice hull has been studied as a sorbent for the removal of Pb(2+) from aqueous solutions. Effect of contact time, initial concentration, pH and temperature has been studied. The effect of temperature (30, 40, 50 and 60 degrees C) on adsorption phenomena has been studied and data have been analyzed using Langmuir isotherm. The change in enthalpy (Delta H) (-14.6179 kJ/mol), free energy (Delta G) and entropy (DeltaS) has also been evaluated. The negative values of Delta G and Delta H indicate the adsorption of lead ions on the surface of hybrid precursor to be spontaneous and exothermic under the experimental condition.     

Treatment of desizing wastewater by catalytic thermal treatment and coagulation

In the present study, the coagulation of the fresh and thermally treated desizing wastewater has been reported. The maximum COD reduction of fresh desizing wastewater using coagulation was observed with commercial alum at initial pH 4. This was followed by aluminum potassium sulfate (pH 4), FeCl(3) (pH 6), PAC (pH 6) and FeSO(4) (pH 4). The maximum COD reduction observed at a coagulant (commercial alum) dose of 5 kg/m(3) and pH 4 was 58% whereas the color reduction at these conditions was 85%. The results reveal that the application of coagulation on the catalytic thermal treated effluent is more effective in removing nearly 88% of COD and 96% of color at above mentioned conditions except at a coagulant dose of 1 kg/m(3). The amount of inorganic sludge generated gets drastically reduced (almost 25%) due to the reduced amount of coagulant. The COD and color of the final effluent were found to be 98.6 mg/l and 2.67 PCU, respectively, and the COD/BOD(3) ratio was 1.36. The settling rate of the slurry was found to be strongly influenced by treatment pH. The slurry obtained after treatment at pH 12 settled faster in comparison to slurry obtained at pH 4. The filterability of the treated effluent is also strongly dependent on pH. pH 12 was adjudged to be the best in giving highest filtration rate.     

Vibration and damping characteristics of beams with active constrained layer treatments under parametric variations

Hybrid damping designs with active piezoelectric materials and passive viscoelastic materials (VEMs) combine the advantages of both active and passive constrained layer damping (ACLD/PCLD) treatments.Researchers have established the standards for the extent and placement of the PCLD treatment for common structures. However for ACLD treatment, such detailed studies are not available. This study is aimed to examine, the effect of parametric variation of active constrained layer on the vibration control of the beams treated with optimally placed active or passive constrained layer damping patches. Finite element model is developed to model the open-loop and close-loop dynamics of active/passive constrained layer damping treated beam. The placement strategies of ACLD patches are devised using the modal strain energy (MSE) approach. Extensive experimentation studies are conducted by making twenty one separate samples of ACLD/PCLD treated beams with variations in viscoelastic material layer thickness, ACLD/PCLD patch coverage and location of the patch. Effects of key parameters, such as control gain, viscoelastic material thickness, coverage and location variation of ACLD patch on the system loss factor have been investigated. The careful analysis of results from partially covered ACLD treated beam suggests that the maximum damping of the first mode can be achieved by attaching the ACLD patch only up to 50% coverage. It also reveals that with proper choice of the control voltage and thickness, the effective loss factor can be almost doubled. The present study suggests the potential use of parametric studies that establish some guide lines for the extent and placement of the ACLD patches on the cantilevered beam.     

Safety evaluation of multilane arterials in Florida

Resurfacing is one of the more common construction activities on highways. While its effect on riding quality on any type of roadway is obviously positive; its impact on safety as measured in terms of crashes is far from obvious. This study examines the safety effects of the resurfacing projects on multilane arterials with partially limited access. Empirical Bayes method, which is one of the most accepted approaches for conducting before-after evaluations, has been used to assess the safety effects of the resurfacing projects. Safety effects are estimated not only in terms of all crashes but also rear-end as well as severe crashes (crashes involving incapacitating and fatal injuries). The safety performance functions (SPFs) used in this study are negative binomial crash frequency estimation models that use the information on ADT, length of the segments, speed limit and number of lanes. These SPFs are segregated by crash groups (all, rear-end, and severe), length of the segments being evaluated, and land use (urban, suburban, and rural). The results of the analysis show that the resulting changes in safety following resurfacing projects vary widely. Evaluating additional improvements carried out with resurfacing activities showed that all (other than sidewalk improvements for total crashes) of them consistently led to improvements in safety of multilane arterial sections. It leads to the inference that it may be a good idea to take up additional improvements if it is cost effective to do them along with resurfacing. It was also found that the addition of turning lanes (left and/or right) and paving shoulders were two improvements associated with a project's relative performance in terms of reduction in rear-end crashes.     

Bioactive polymers: Synthesis,release study and antimicrobial properties of polymer bound Ampicillin

Matrices of poly(styrene-co-maleic anhydride) with surface containing functional anhydride groups of different percentage was prepared by solution polymerization. Ampicillin was bound on the surface of this matrix by chemical bonding in organic medium. The amount of Ampicillin chemically bound to the matrix was spectroscopically characterized and the in vitro release rate of Ampicillin in weakly basic medium was established along with the determination of its antimicrobial activity. This prodrug allows a prolonged release (6–8 days) of the drug.