Understanding the contributions of normal-fatigue and static loading to the dwell fatigue in a near-alpha titanium alloy

This article presents the results of a recent study of the response of an α/β-forged Ti-6Al-2Sn-4Zr-2Mo alloy during static, normal-fatigue, and dwell-fatigue loading. The plastic-strain accumulation under different loading conditions is reported. The failure modes and associated fractographic features under static, normal-fatigue, and dwell-fatigue loading conditions are also discussed. These results are used to obtain a better understanding of the relative contributions of the cyclic and creep processes to the overall damage under dwell-fatigue conditions.     

Improved genetic algorithm for channel allocation with channel borrowing in mobile computing

This paper exploits the potential of the Genetic Algorithm to solve the cellular resource allocation problem. When a blocked host is to be allocated to a borrowable channel, a crucial decision is which neighboring cell to choose to borrow a channel. It is an optimization problem and the genetic algorithm is efficiently applied to handle this. The Genetic Algorithm, for this particular problem, is improved by introducing a new genetic operator, named pluck, that incorporates a problem-specific knowledge in population generation and leads to a better channel utilization by reducing the average blocked hosts. The pluck operator makes the crucial decision of when and which cell to borrow with the future consideration that the borrowing should not lead the network to chaos. It makes a channel borrowing decision that minimizes the number of blocked hosts and improves the long-term performance of the network. Efficacy of the proposed method has been evaluated by experimentation.     

Thermoplastic vulcanizates obtained by reaction-induced phase separation: Interplay between phase separation dynamics,final morphology and mechanical properties

Reaction-induced phase separation (RIPS) of miscible blends of poly(?-caprolactone) (PCL) and an epoxy resin based on poly(propylene oxide) (PPO) was used to prepare thermoplastic vulcanizates (TPVs) with fine rubber dispersions. Scanning electron microscopy (SEM) confirmed the formation of cross-linked rubber particles dispersed in the thermoplastic matrix at PCL contents ≥20 wt%. The morphology development during phase separation was studied by optical microscopy (OM) and time-resolved small-angle light scattering (SALS). It was shown that higher curing temperatures lead to a decrease in rubber particle size, but at the same time lead to an increase in the extent of particle connectivity. In some cases, gelation of the PPO-rich phase limits full structure development, which leads to extensive connectivity between the dispersed rubber particles and a strong deterioration in tensile properties.     

利用串行RapidIO连接功能增强DSP协处理能力

SRIO IP解决方案提供真实双向数据流,大大增强连接功能。目前,对高速通信与超快计算的需求正与日俱增。有线和无线通信标准的应用随处可见,数据处理架构每天都在扩展。较为普遍的有线通信方式是以太网(LAN、WAN和MAN网络)。手机通信是最为常见的无线通信方式,由应用了DSP的     

Acoustic resonance spectroscopy (ARS)

The basics of acoustic resonance spectroscopy (ARS), which provides data about an object's physical structure and composition, are explained. In ARS, one actively excites a large number of resonances (normal modes) in an object that has no internal vibrations by slowly sweeping the excitation frequency to obtain an acoustic spectrum of the object. The instrumentation for this nondestructive evaluation technique is described, and some applications are briefly discussed     

Opposite-channel-based charge injection in SOI MOSFET's under hotcarrier stress

By operating one channel of a typical SOI MOSFET in avalanche while keeping the opposite channel accumulated, charge injection into the opposite gate takes place. Three independent experiments are described that demonstrate the occurrence of this opposite-channel based charge injection. The experimental results are in agreement with PISCES numerical simulations     

Studies on the electrical conductivity and galvanomagnetic characteristics of short carbon fibre filled thermoplastic elastomers

The electrical resistivity of short carbon fibre filled thermoplastic elastomers based on natural rubber-high density polyethylene (NR-HDPE) blend and styrene-isoprene-styrene (S-I-S) block copolymer has been studied by varying the concentration of fibre from the 0 to 40 phr level. A sharp drop in resistivity is observed in both cases after a critical concentration of fibre is reached, with the S-I-S system showing lower values of critical concentration. At higher concentrations, experimental values of the electrical conductivity agreed reasonably well with the calculated values from a theory based on the probability of formation of a conductive network. The effect of temperature on the resistivity of the composites has also been investigated in a temperature range of 27–120 °C and 27–90 °C for the NR-HDPE system and S-I-S system, respectively. The type of carrier in both the composites is found to be n-type, i.e. electrons, and the activation energy of hopping of the electrons for both the systems has been calculated. A Hall effect study has also been carried out to determine the carrier concentration and drift mobility of both the composites.     

Acute bilateral striatal necrosis in an infant: CT and MRI

We report a case of acute bilateral striatal necrosis in an infant. CT and MRI findings are described.