Plasma Focus Device as a Breeder of 14.66 MeV Protons to Produce Short-Lived Radioisotopes

In plasma focus devices filled deuterium gas with low pressure admixture gas, ³He, the deuterium creates high energy protons of 14.66 MeV through the ³He(d, p) ⁴He(Q = 18.35 MeV) fusion reaction. This reaction takes place due to the thermal and non-thermal (beam-target) mechanisms. The proton yield production for deuterium filling gas is determined by using the beam-target character of the pinched plasma and moving boiler model. If we use a low pressure admixture gas like ¹¹B, these high energy protons in turn, could generate short-lived radioisotopes like ¹¹C (used in positron emission tomography) via the ¹¹B(p, n)¹¹C reaction. Calculations indicate the influence of drive parameter to the final yield for a Mather type device.     

Enhanced dielectric and piezoelectric response in PZT superlattice-like films by leveraging spontaneous Zr/Ti gradient formation

Spontaneous Zr/Ti gradient formation during crystallization in sol-gel-processed Pb(Zr_xTi_1−x)O₃ films is used to prepare superlattice-like (SL), highly (1 0 0)-oriented thin films on Pt/Ti/SiO₂/Si substrates. SLs with stacking periodicity ranging from 13 up to 60 nm are synthesized with compositional gradient normal to the film surface and composition centered at x ≈ 0.53. X-ray diffraction (XRD) shows high order satellite peaks and no secondary phases. XRD structural refinement, along with XPS depth profile chemical analysis, reveals that the crystal structure alternates between rhombohedral and in-plane polarized tetragonal phases, effectively corresponding to “artificially created” phase boundaries. SL films have ∼45% and ∼20% higher d_33,f piezoelectric coefficient and dielectric permittivity, respectively, with respect to compositional-gradient-free films of similar thickness, possibly due to enhanced reorientation of electrical dipoles and higher extrinsic contributions due to the motion of the “artificially created” phase boundaries in SL films. Dielectric nonlinear studies indicate a higher amount of extrinsic contributions to the dielectric response in SL and gradient-enhanced films than in conventional films of similar average composition. This processing method provides a simple chemical route to create thin ferroelectric films with enhanced dielectric and piezoelectric properties suitable for a range of miniaturized applications.     

Study the Output Characteristics of a 90 kJ Filippove-Type Plasma Focus

The output characteristics of a Filippove-Type plasma focus “Dena” (288 μF, 25 kV, 90 kJ) is numerically investigated by considering the voltage, current, current derivative, and maximum current as a function of capacitor bank energy in the constant Argon gas pressure and compared to the experiment. It is shown that increase on the bank energy leads to the increment on the maximum current and decrement on the pinch time.     

Meshless Method for Solving Transient Radiative and Conductive Heat Transfer in Two-Dimensional Complex Geometries

A diffuse approximation meshless method (DAM) is employed to solve the transient radiative and conductive heat transfer problem in a semitransparent medium enclosed in 2-D complex geometries. The computational spatial domain is discretized by a set of nodes scattered in the domain and boundary without information on the relationship between them. The meshless method for radiative transfer equation is based on the even-parity formulation of the discrete ordinates method without any form of upwinding. Results of dimensionless temperature distribution at different dimensionless times are obtained and validated with other benchmark approximate solutions in order to illustrate the performance of the proposed method.     

Sustained drug release using supramolecular hydrogels composed of cyclodextrin inclusion complexes with PCL/PEG multiple block copolymers

Methadone hydrochloride is a narcotic drug used to relieve chronic pain and control withdrawal symptoms in people undergoing detoxification for opiate addiction, but poses some limits. To reduce the limits and increase the drug’s effectiveness, supramolecular hydrogels composed of α-CD (α-cyclodextrin) and PCL/PEG (polycaprolactone/polyethylene glycol) copolymers, which gained attention due to their advantages, were chosen in this study as controlled-release formulations. PCL/PEG/PCL and PCL/PEG copolymers were synthesized by a microwave-assisted method and then supramolecular hydrogels were prepared by mixing the solutions of copolymers/drug and α-CD to make a methadone hydrochloride sustained-release system. Effects of the drug, copolymer, and α-CD concentrations and copolymer structure on gelation time were also investigated. The systems had rheological properties that depended on copolymer construction and component concentrations. The microwave-assisted method provides an accelerated synthesis of the copolymers with yield of 57 % and low level of impurities. The supramolecular hydrogels demonstrated shear thinning and thixotropic behavior and regained their networks quickly after passing through a fine needle. Due to the porous construction of supramolecular hydrogels, they swell in the presence of fluids and absorb large quantities of water, thereby making the system comprehensively biocompatible. In this study, supramolecular hydrogels composed of α-CD with tri- and di-block copolymers were investigated and found to have rheological properties that depended on copolymer construction and component concentrations. Changing one parameter alone like copolymer or α-CD concentration or the length of blocks could not significantly affect on the drug release, but combination of these factors was efficient. Results of the present study indicated that supramolecular hydrogels composed of α-CD and PCL/PEG copolymers are appropriate drug delivery systems that can release methadone hydrochloride in a sustained manner.     

Bio‐lubricant flow behaviour in mini‐channels

One of the most common causes of failures in total joint replacements is the generation of wear particles within the joint. This contributes to bone lost and aseptic loosening of the implant, eventually requiring its replacement. Many studies have been carried out to improve the wear characteristics of bearing surfaces in total joint replacement. From the lubrication point of view, the friction behaviour of surfaces and rheology of the joint lubricant (synovial fluid) have been extensively studied. However, little attention has been paid to the interaction between the lubricant and the bearing surfaces. The aim of this study is to develop a methodology for studying the behaviour of bio‐based lubricant in mini‐channels. For this purpose, micro‐particle image velocimetry was used in order to characterise the lubricant behaviour. Channels made of relevant materials such as ultra‐high molecular weight polyethylene, cobalt–chromium–molybdenum alloy and titanium–aluminium–vanadium alloy with 1 and 1.5 mm width, 45 mm length and 2 mm depth were experimentally investigated. Results suggested that the used polymeric solution interaction with solid surfaces is very sensitive to the polymer concentration in the lubricant. Moreover, it was observed that there exist differences between water (Newtonian reference fluid) and the polymeric solution behaviour even at very simple movements; although usually, the properties of this lubricant at high shear rates are estimated by water properties. Copyright © 2015 John Wiley & Sons, Ltd.     

Performance evaluation of polymer/clay nanocomposite thermal protection systems based on polyethylene glycol phase change material

Phase change materials (PCMs) are substances with a high heat of fusion which, through melting and solidifying at specified temperatures, are capable of storing or releasing a large amount of thermal energy. This phenomenon can be utilized in designing the heat protective materials as well as in the thermal energy storage systems. In this work, effects of polyethylene glycol (PEG) as PCM and montmorillonite nanoclay, as a thermal property modifier in epoxy resin on the thermal protection performance of nanocomposites were studied. A special performance evaluation test was designed to study the top surface temperature behavior of prepared samples under back surface heating. Results indicated that increasing PCM content improved thermal protection performance, but lower thermal diffusivity was found for the sample containing 60 wt% of PEG, with a 31 % decrease in top surface temperature. These results show that increasing of top surface temperature of samples containing PCM was very slow when compared with the neat epoxy sample. A top surface temperature behavior of these samples shows a plateau in melting region of PCM which makes a delay time in temperature increment compared with that of the neat epoxy sample. Moreover, heat protection performances of low filled nanocomposite blends, i.e., nanocomposite blends with 5 and 7 wt% of clay in PEG have been improved about 10 % in comparison with EP/PEG60 blend.     

Attentional bias to pictures of fear-relevant animals in a dot probe task.

Attentional bias to fear-relevant animals was assessed in 69 participants not preselected on self-reported anxiety with the use of a dot probe task showing pictures of snakes, spiders, mushrooms, and flowers. Probes that replaced the fear-relevant stimuli (snakes and spiders) were found faster than probes that replaced the non-fear-relevant stimuli, indicating an attentional bias in the entire sample. The bias was not correlated with self-reported state or trait anxiety or with general fearfulness. Participants reporting higher levels of spider fear showed an enhanced bias to spiders, but the bias remained significant in low scorers. The bias to snake pictures was not related to snake fear and was significant in high and low scorers. These results indicate preferential processing of fear-relevant stimuli in an unselected sample. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of Nitrogen on Hydrogenated Amorphous Carbon Thin Films Deposited by Plasma Focus Device

To carry out our research, a plasma focus device is used to deposit thin films of nitrogen doped hydrogenated amorphous carbon (a-C:H:N) onto the stainless steel-AISI-304 substrates at room temperature. Thin films are deposited with the same numbers of focus shots, at the same distance from the anode tip and with different partial pressures of nitrogen in the mixtures of acetylene/nitrogen as working gas. The nitrogen contents of deposited films are studied using nuclear reaction analysis (NRA) techniques. The results prove that nitrogen contents of the samples do not increase significantly by increasing partial pressure of nitrogen of the working gas for both sets of the samples. Moreover, NRA results exhibit the limitation of nitrogen incorporated into the samples, when this experimental setup is used. G-peak position and peak intensity ratio of the D-band to G-band (I_D/I_G) are used to investigate the diamond characters. Also, they show that sp² clustering is highly dependent on the nitrogen atomic contents and angular position of the samples. Scanning electron microscopy (SEM) shows the granular surface morphology of the films. Furthermore, it shows that angular position of the samples with respect to the anode axis plays an important role in the grain size of the surface of the samples. The thickness of the films decreases significantly by increasing angular position of the samples, while it decreases slightly by increasing partial pressure of nitrogen of the working gas. The Vickers surface hardness of the thin films exhibits significant dependency on the sp² clustering.     

Extraction of amino acids from protein hydrolysates by electrodialysis

Protein hydrolysates were obtained by acid hydrolysis from animal or human residues, such as poultry feathers, ox blood and human hair. After neutralization and discolouration with active charcoal, the hydrolysates were treated by successive electrodialysis (ED) in order to extract amino acids into several fractions. The current density and pH were optimized for each ED operation performed with preindustrial pilot scale equipment. The first step was the demineralization of amino acid mixtures using an ED stack with two compartments. The salt removal was achieved with extraction degrees higher than 90% and current efficiencies of about 80%. In the most favourable case, the amino acid losses did not exceed 10%. The second step was the extraction of the charged amino acids using an ED stack with four compartments. Three fractions were obtained, corresponding to the acidic, basic and neutral amino acids. The extraction degrees varied from 80% to 100%. In the third step, the fractionation of basic amino acids on the one hand, and neutral amino acids on the other hand, was carried out with enrichment degrees varying from 50% to 80%. © 1998 SCI