I^2C总线接口技术在视频处理芯片中的应用

文章使用传输I^2C总线技术实现视频处理芯片与PC机的数据通信。采用软、硬件协同工作的方法完成芯片的参数初始化,并将其应用于对电路内部节点的跟踪和测试,极大地增加了视频处理的灵活性。将I^2C接口电路内嵌于视频处理芯片中,采用CMOS0．6μm单层多晶硅双层金属布线工艺流片,电路测试功能正常。     

Visible photoluminescence from Ge nanoclusters implanted in nanoporous aluminum oxide films

Nanoporous aluminum oxide (Al₂O₃) films with uniform porous size of 45 nm prepared by the electrochemical process in inorganic acid medium were implanted at room temperature (RT) with 120 keV Ge⁺ ions with a fluence of 1.2×10¹⁶ cm⁻². The nucleation and growths of Ge nanoparticles, were obtained by thermal annealing of the implanted samples at the temperature range of 200-600 °C. The size and distribution of the nanoparticles were characterized by photoluminescence (PL) measurements. The photoluminescence measurements as a function of the annealing temperature shows that at low annealing temperature (200 °C), the sample presents a low intensity and broad emission band centered at 5456 Å consistent with emission band characteristics of nanocluster of Ge with diameter in the range of 4-8 nm, as the annealing temperature increases to 400 °C the PL intensity increases by a factor of almost 20 and the emission band suffers a small red shift. The intensity increases can be related to the increase of the number of Ge nanocluster. At the annealing temperature of 600 °C, the emission band is considerably red shifted by almost 172 Å and the emission intensity decreases significantly, strongly suggesting that nanocrystalline Ge having a character of direct optical transitions exhibits the visible photoluminescence.     

Dispersion characteristics of asymmetric coupled anisotropic dielectric waveguides using FDFD

The formulation is developed in the frequency domain and the finite difference method is used for the numerical solution of the scalar wave equation, written in terms of the transverse components of the magnetic field. As a result a conventional eigenvalue problem is obtained without the presence of spurious modes due to the implicit inclusion of the divergence of the magnetic field equal to zero. The formulation is developed to include biaxial anisotropic dielectrics with an index profile varying arbitrarily in the cross section of the waveguide under analysis. This formulation is then applied to the analysis of the influence on the dispersion characteristics of the dimensions of asymmetric coupled rectangular uniaxial anisotropic dielectric waveguides. As expected, the reduction of the height or the width of one of the rectangular dielectric waveguides causes the dispersion curves to move towards higher frequencies.     

微斑光电流谱和光反射谱的自动测量系统

叙述了为测量半导体光电器件的光电流谱和光反射谱所构成的自动测量系统及其数据处理方法。     

Effects of time of grape pomace fermentation and distillation cuts on the chemical composition of grape marcs

 The effects of fermentation time and distillation cuts on the composition of distillates in terms of ethanal, 1,1-diethoxyethane, methanol, 1-butanol, 2-butanol, 1-propanol, 2-methyl-1-propanol, 2-methyl-1-butanol, 3-methyl-1-butanol, ethyl acetate, ethyl 2-hydroxypropanoate, 3-methylbutyl acetate, hexyl acetate, 2-phenylethyl acetate, hexanol, trans-2-hexenol, trans-3-hexenol, cis-3-hexenol, 2-phenylethanol, ethyl butyrate, ethyl hexanoate, ethyl octanoate, ethyl decanoate, ethyl dodecanoate, 2-methylpropanoic acid, 3-methylbutanoic acid, hexanoic acid, octanoic acid, decanoic acid, and dodecanoic acid were assessed through data generated according to a factorial design using analysis of variance and principal component analysis. Four times of storage of pomace obtained following winemaking of two grape varieties of white Verde wine (Alvarinho and Loureiro) and three distillation cuts were considered; volatile compounds in the 24 samples generated were analyzed directly, and indirectly after extraction and concentration, by capillary gas chromatography. The results generated have suggested clear differences (P<0.05) between distillate cuts obtained throughout fermentation times for each grape variety. The major differences between the different distillate fractions analyzed were accounted for by the contents of diethyl butanoate, ethyl 2-hydroxypropanoate, and the sum of 3-methylbutanoic and 2-methylpropanoic acids for Loureiro, whereas the main differences were accounted for by the contents of diethyl butanoate and the sum of the carboxylic acids for Alvarinho.     

In vivo measurement of the brain and skull resistivities using an EIT-based method and realistic models for the head

In vivo measurements of equivalent resistivities of skull (rho(skull)) and brain (rho(brain)) are performed for six subjects using an electric impedance tomography (EIT)-based method and realistic models for the head. The classical boundary element method (BEM) formulation for EIT is very time consuming. However, the application of the Sherman-Morrison formula reduces the computation time by a factor of 5. Using an optimal point distribution in the BEM model to optimize its accuracy, decreasing systematic errors of numerical origin, is important because cost functions are shallow. Results demonstrate that rho(skull)/rho(brain) is more likely to be within 20 and 50 rather than equal to the commonly accepted value of 80. The variation in rho(brain)(average = 301 omega x cm, SD = 13%) and rho(skull)(average = 12230 omega x cm, SD = 18%) is decreased by half, when compared with the results using the sphere model, showing that the correction for geometry errors is essential to obtain realistic estimations. However, a factor of 2.4 may still exist between values of rho(skull)/rho(brain) corresponding to different subjects. Earlier results show the necessity of calibrating rho(brain) and rho(skull) by measuring them in vivo for each subject, in order to decrease errors associated with the electroencephalogram inverse problem. We show that the proposed method is suited to this goal.     

Dispersion in finlines on semiconductor and the S-parameters of a step discontinuity

The Transverse Transmission Line method is used for the characterization of bilateral and unilateral finlines on a semiconductor substrate and in conjunction with the modal method, for the calculation of the scattering parameters due to a step discontinuity on a unilateral finline with a lossless dielectric substrate. Numerical results of the effective dielectric constant, attenuation constant and characteristic impedance for the bilateral and unilateral finlines on semiconductor substrates, and results of scattering parameters of a step discontinuity for unilateral finline, are presented.     

Analysis of microstrip antennas on circular-cylindrical substrateswith a dielectric overlay

The use of dyadic Green's functions and the moment method is explored for the solution of microstrip antenna problems on circular cylindrical substrates. The dyadic Green's functions of the electric type are obtained for a medium consisting of three cylindrical dielectric layers concentric with a perfectly conducting cylinder, and integral equations are developed for the evaluation of the electromagnetic fields. The effect of a dielectric overlay on the resonant frequency of a cylindrical-rectangular microstrip antenna is analyzed. The patch is directly fed by means of a microstripline printed along the cylinder axial direction. The results show that the effect of the dielectric overlay is substantial when its relative permittivity and thickness are increased, such that this effect has to be very carefully considered in the design of microstrip antennas     

Integrated structure and control design for mechatronic systems with configuration-dependent dynamics

This paper considers the optimal design of mechatronic systems with configuration-dependent dynamics. An optimal mechatronic design requires that, among the structural and control parameters, an optimal choice has to be made with respect to design specifications in the different domains. Two main challenges are treated in this paper: the non-convex nature of the optimization problem and the difficulty in modeling serial machines with flexible components and their embedded controllers. The optimization problem is treated using the direct design strategy which considers simultaneously structural and control parameters as variables and adopts non-convex optimization algorithms. Linear time-invariant and gain-scheduling PID controllers are addressed. This methodology is exploited for the multi-objective optimization of a pick-and-place assembly robot with a gripper carried by a variable-length flexible beam. The resulting design tradeoffs between system accuracy and control efforts demonstrate the advantage of an integrated design approach for mechatronic systems with configuration-dependent dynamics.     

A Multi-user Receiver for Inter-Cell Interference Reduction in LTE PUCCH Signaling

In 3rd generation partnership project (3GPP) long term evolution (LTE) systems, when no resources has been assigned in the uplink to a given user equipment (UE), the control information associated with layers 1 and 2 in the protocol stack is conveyed back to the base station through the so-called physical uplink control channel (PUCCH). In PUCCH, the data streams transmitted by multiple UEs are multiplexed in the time-domain and in the frequency-domain with the aid of spreading codes. Although the spreading codes associated with UEs within the same cell can be assumed to be orthogonal, the presence of inter-cell interference (ICI) in multi-cell scenarios severely limits receiver performance. In particular, the Format 1 of PUCCH, which is associated with the transmission of hybrid automatic repeat request acknowledgements (ACK/NACK) and scheduling requests, has a major impact on system performance, since an incorrectly decoded ACK/NACK message may introduce significant delay in data transmission. In this contribution, we propose a new multi-user receiver for ICI reduction in PUCCH LTE that operates both in cooperative and non-cooperative multi-cell architectures. The proposed receiver relies on a constrained tensor modeling of the received signal in PUCCH signaling, and affords an iterative joint channel estimation and symbol detection by simultaneously exploiting the energy of the data symbols and the pilot tones present in PUCCH. The formulation of the proposed algebraic receiver model incorporates symbol-basis hopping and slot-basis hopping signaling schemes, which are interference randomization techniques existing in the 3GPP specifications of LTE system. Computer simulation results show the remarkable performance gains of the proposed receiver compared to the conventional time-frequency decorrelator based receiver.