LCD motion blur reduction: a signal processing approach.

Liquid crystal displays (LCDs) have shown great promise in the consumer market for their use as both computer and television displays. Despite their many advantages, the inherent sample-and-hold nature of LCD image formation results in a phenomenon known as motion blur. In this work, we develop a method for motion blur reduction using the Richardson-Lucy deconvolution algorithm in concert with motion vector information from the scene. We further refine our approach by introducing a perceptual significance metric that allows us to weight the amount of processing performed on different regions in the image. In addition, we analyze the role of motion vector errors in the quality of our resulting image. Perceptual tests indicate that our algorithm reduces the amount of perceivable motion blur in LCDs.     

A displacement measurement technique using millimeter-wave interferometry

A displacement measurement sensor, capable of sub-millimeter resolution, using millimeter-wave interferometry has been developed. The sensor operates at 37.6 GHz and is realized using both microwave integrated circuits and monolithic microwave integrated circuits. It has been used to accurately measure the displacement of metal plate location and water level. A resolution of only 0.05 mm is achieved. A maximum error of 0.3 mm is also attained without correction for the nonlinearity of the phase-detection processor and agrees well with the theoretical calculation.     

Modulation Transfer Noise Effects from a Continuous Digital Carrier to FDM/FM Carriers in Memoryless Nonlinear Devices

An analysis of the modulation transfer noise effects from a continuous (nonbursty) digital carrier to multiple FDM/FM carriers in a common memoryless nonlinear amplifier (e.g., satellite transponder TWTA) is presented. It is shown that the modulation transfer noise, which is caused by the random envelope variations of the digital carrier due to the random data patterns and filtering of the PSK pulses, consists of both discrete and continuous spectral components in the baseband of the FDM/FM carriers. Numerical examples in terms of the noise power ratio as well as a comparison between measured and computed results are given. In general, the discrete or tonal interference component at the symbol rate of the digital carrier is quite significant. Results of this paper should be useful in the planning of FDMA satellite transponders employing the mixed PSK-FM mode of operation.     

Simulation of the High-Frequency Response of a Heterogeneous Ground through the Finite Difference Technique

To simulate the propagation of an electromagnetic plane wave in an inhomogeneous ground, the finite difference approach can be used. One of the main problems in using this method is imposing the boundary conditions near the ground surface, especially at high frequency. Indeed, for the E polarization, the upper top of the numerical grid must be sufficiently far away from the air-ground interface in order to neglect the field due to the heterogeneities and the discretization of the atmosphere is necessary. For magneto-telluric modeling, improved boundary conditions have already been proposed. This paper deals with a new condition, valid everywhere in air and which can be applied for E and H polarization. Thus even at high frequency, as for radar applications, only one line is added to the grid discretizing the ground.     

Symmetric Orthogonal Complex-Valued Filter Bank Design by Semidefinite Programming

A new design method for complex-valued two-channel finite impulse response (FIR) filter banks with both orthogonality and symmetry properties is developed. Based on a novel linear matrix inequality (LMI) characterization of trigonometric curves, the optimal design of perfect-reconstruction filter banks is cast into a semidefinite programming (SDP) problem. The dimension of the resulting SDP problem is further reduced by exploiting convex duality. Consequently, the globally optimal solution can be found for any practical filter length and desired regularity order.     

A Si bipolar monolithic RF bandpass amplifier

The application of monolithic inductors to the realization of Si bipolar monolithic RF amplifiers is investigated. As a test vehicle, a bipolar monolithic bandpass amplifier was fabricated and characterized. A 4-nH silicon integrated inductor was used to achieve a peak S ₂₁ gain of 8 dB, a simulated noise figure of 6.4 dB, and a matched input impedance of 50 Ω in the frequency range of 1-2 GHz     

In0.52Al0.48As/In0.53Ga0.47As MSM photodetectors and HEMT's grown by MOCVD on GaAs substrates

The authors report the first demonstration of In_0.52Al _0.48As/In_0.53Ga_0.47As metal-semiconductor-metal (MSM) photodetectors and high-electron-mobility transistors (HEMTs) grown on GaAs substrates by organometallic chemical vapor deposition. Both photodetectors and transistors showed no degradation in performance compared to devices simultaneously grown on InP substrates. The photodetectors exhibited a responsivity of 0.45 A/W and leakage current of 10 to 50 nA. The HEMTs with a gate length of 1.0 μm showed a transconductance as high as 250 mS/mm, and f_T and f_max of 25 and 70 GHz, respectively     

Flip chip underfill flow characteristics and prediction

This paper presents recent results on underfill flow characterization. The flow properties of a number of commercial and experimental underfills were recorded and analyzed using quartz test chips with specially designed bump patterns (e.g., peripheral, full array, and mixed designs). Each was bonded onto an organic laminate substrate to form a flip chip package. Underfill was then applied to the packages and flow time, filler settling, and air entrapment were evaluated. Good flow can be described in terms of three measurable parameters, namely, viscosity, contact angle, and more importantly, filler size and distribution. Viscosity and contact angle are commonly used in Hele Shaw and Washburn models. However, these models do not take filler properties into consideration. In general, underfills with particles less than 5 μm exhibited faster and more uniform flow fronts than materials with larger particles. The best flowing materials worked well with standoff heights between 50 and 75 μm, while the poorer flowing materials showed streaking, voiding, and fingering at these heights. At gaps of 25 μm, however, nearly all the materials exhibited pronounced and reproducible streaking     

Constraints on the cutoff frequencies of Mth-band linear-phase FIRfilters

Constraints are derived for the cutoff frequencies of linear-phase FIR Mth-band filters such that the filters have good passband and stopband characteristics, i.e. ones that very closely approximate an ordinary (non Mth-band) filter designed using some optimal method. Constraints on lowpass filters are first considered, and the results are extended to multiband filters     

Interpolated LIR Mth-band filter design with allpass subfilters

We propose a new allpass-based structure for the IIR Mth-and 2Mth-band filters. These filters consist of M allpass filters and an interpolation filter (sum of two allpasses). Consequently, the proposed structure is very efficient in implementation. By choosing the allpass phase appropriately, the resulting phase response of the IIR Mth-band filter becomes approximately linear. An example is designed and compared with FIR Mth-band filters