Rapid analysis of polymer homologues and additives with SFE/SFC-MS coupling

A rapid and easy analysis method for polymers is presented. The method involves sample preparation by SFE, separation of the extracted compounds by SFC and simultaneous quantitative detection by FID, as well as identification of unknowns by MS. The applications illustrate how structural research work and routine polymer analysis can be done with this time saving method.     

Facile Microwave Assisted Synthesis of Silver Nanostars for Ultrasensitive Detection of Biological Analytes by SERS

We report a very simple, rapid and reproducible method for the fabrication of anisotropic silver nanostars (AgNS) that can be successfully used as highly efficient SERS substrates for different bioanalytes, even in the case of a near-infra-red (NIR) excitation laser. The nanostars have been synthesized using the chemical reduction of Ag⁺ ions by trisodium citrate. This is the first research reporting the synthesis of AgNS using only trisodium citrate as a reducing and stabilizing agent. The key elements of this original synthesis procedure are rapid hydrothermal synthesis of silver nanostars followed by a cooling down procedure by immersion in a water bath. The synthesis was performed in a sealed bottom flask homogenously heated and brought to a boil in a microwave oven. After 60 s, the colloidal solution was cooled down to room temperature by immersion in a water bath at 35 °C. The as-synthesized AgNS were washed by centrifugation and used for SERS analysis of test molecules (methylene blue) as well as biological analytes: pharmaceutical compounds with various Raman cross sections (doxorubicin, atenolol & metoprolol), cell lysates and amino acids (methionine & cysteine). UV-Vis absorption spectroscopy, (Scanning) Transmission Electron Microscopy ((S)TEM) and Atomic Force Microscopy (AFM) have been employed for investigating nanostars’ physical properties.     

Intuitionistic fuzzy system for fingerprints authentication

Using a fuzzy logic control system, we propose in this paper an optimized method to reduce the points number to be used in order to identify a person using fuzzy fingerprints. Two fingerprints are similar if n out of N points from the skin are identical. We discuss a criteria to choose these points. Our method compares two matching sets and selects the optimal set from these, using a fuzzy reasoning system based on intuitionistic fuzzy numbers. The advantage of our method with respect to the classical existing methods consists in a smaller number of calculations.     

Synthesis,Mechanism, and Gas‐Sensing Application of Surfactant Tailored Tungsten Oxide Nanostructures

Widely applicable nonaqueous solution routes have been employed for the syntheses of crystalline nanostructured tungsten oxide particles from a tungsten hexachloride precursor. Here, a systematic study on the crystallization and assembly behavior of tungsten oxide products made by using the bioligand deferoxamine mesylate (DFOM) (product I ), the two chelating ligands hexadecyltrimethylammoniumbromide (CTAB) ( II ) and poly(alkylene oxide) block copolymer (Pluronic P123) ( III ) is presented. The mechanistic pathways for the material synthesis are also discussed in detail. The tungsten oxide nanomaterials and reaction solutions are characterized by Fourier transform IR, ¹H, and ¹³C NMR spectroscopies, powder X‐ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), high‐resolution TEM, and selected‐area electron diffraction. The indexing of the line pattern suggests WO₃ is in its monoclinic structure with a = 0.7297 nm, b = 0.7539 nm, c = 0.7688 nm, and β‐i; = 90.91 °. The nanoparticles formed have various architectures, such as chromosomal shapes (product I ) and slates ( II ), which are quite different from the mesoporous one ( III ) that has internal pores or mesopores ranging from 5 to 15 nm. The nanoparticles obtained from all the synthetic procedures are in the range of 40–60 nm. The investigation of the gas‐sensing properties of these materials indicate that all the sensors have good baseline stability and the sensors fabricated from material III present very different response kinetics and different CO detection properties. The possibility of adjusting the morphology and by that tuning the gas‐sensing properties makes the preparation strategies used interesting candidates for fabricating gas‐sensing materials.     

ICI Reduction in OFDM Systems Using Phase Modified Sinc Pulse

This paper is focused on the problem of reducing the intercarrier-interference (ICI) power in the transmission over Orthogonal Frequency Division Multiplexing Systems (OFDM) using pulse shaping methods. A new pulse was proposed here and it was investigated in terms of ICI interference. It appears to be suitable for transmission in OFDM systems with carrier frequency offset. The results obtained by calculations show that the performance improvements are significant for reducing average intercarrier-interference (ICI) power and increasing the ratio of average signal power to average ICI power (SIR).     

Quantised sine signals estimation algorithm for portable digital signal processor based instrumentation

The principles for the development of portable instrumentation equipment (multimeters, frequency meters, etc.) using quantised sine signals, with a common unknown fixed frequency, and an estimation algorithm implemented on digital signal processors (DSPs) are described. An unknown internal sine signal is generated. For measurements, analog to digital converters (ADCs) acquire multiple samples of sine signals, which are quantised and transmitted to the DSP. A precise quantised sine signal, with a common unknown fixed frequency, signal estimation algorithm, for DSP-based instrumentation, is presented. An iterative process is performed to obtain amplitudes, phases, dc components, common frequency and to control the ADC number of bits. Final solutions depend on the initial values, obtained using different classical estimation algorithms. The accuracy of the initial values of iterations and the number of used points have a large influence on the speed of convergence. The algorithm stops when quantisation conditions are satisfied.     

Quantisation-based video watermarking in the wavelet domain with spatial and temporal redundancy

In this article we introduce a new public digital watermarking technique for video copyright protection working in the discrete wavelet transform domain. The scheme uses binary images as watermarks. These are embedded in the detail wavelet coefficients of the middle wavelet sub-bands. The method is a combination of spread spectrum and quantisation-based watermarking. Every bit of the watermark is spread over a number of wavelet coefficients with the use of a secret key. The resilience of the watermarking algorithm was tested against a series of eight different attacks using different videos. To improve the resilience of the algorithm we use error correction codes and embed the watermark with spatial and temporal redundancy. The proposed method achieves a very good perceptual quality with mean peak signal-to-noise ratio values of the watermarked videos of more than 40 dB and high resistance to a large spectrum of attacks.     

Le mecanisme du developpement de l'oxyde poreux d'aluminium—I. Sur la possibilite du contact direct aluminium-solution electrolytique au cours du processus de formation—transformation de la couche barriere

Experimental evidence on the electrolyte permeability of the barrier layer during the anodic oxydation of Al in H₂SO₄ are reported. On this basis, a new theoretic mecanism of anodic oxidation process is proposed. The current efficiency of the oxydation process η_ox (determined by weighing the oxide) depends linearly on the barrier layer voltage, V, η_ox = V/2V^x, were V^x is the critical oxidation voltage.     

Impact strength elastomer composites based on polystyrene components separated from waste electrical and electronic equipment

The reuse of plastic components of waste electrical and electronic equipment (WEEE) is an important concern both for environmental issues and to preserve the material resources, with minimum energy consumption. Considering that polystyrene fraction was reported as approximate 80% of the total amount of WEEE plastic, this article aims to evaluate the recycling of this fraction, without separation by components, by melt compounding with styrene-butadiene block-copolymer (SBS) and hydrogenated and maleinized SBS, the blend of the two elastomers acting both as an impact modifier and compatibilizer. The composites are characterized by mechanical analysis, impact tests, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction. The recycling conditions of the polystyrene fraction as composites without eliminating the WEEE additives for improved UV and flame resistance, with physical mechanical properties comparable to those of high-impact polystyrene resulted from the study. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48329.     

The Effect of the Ionizing Radiation on Hydroxyapatite–Polydimethylsiloxane Layers

The bio hydroxyapatite (HAp) was used from a long time in different medical and environmental applications. The HAp layers with a uniform surface were used for various medical applications such as orthopedic and dental metal implants. In this work, we reported on the influence of X‐ray radiation on the structural and morphological properties of composite layers based on HAp and polydimethylsiloxane (PDMS) deposited on titanium substrates. The HAp:PDMS layers were investigated by different complementary methods such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and glow discharge optical emission spectrometry (GDOES). FTIR spectral analysis showed that the molecular structure of the coatings was not changed after their irradiation even though, the depth profile analysis performed by GDOES indicated a depletion of Ca and P elements from the HAp:PDMS irradiated samples. By SEM, we showed that the morphological features of the coatings were also changed, as the irradiated layers are delaminated. The biological assays confirmed that the antibacterial activity of HAp:PDMS composite layers increased after irradiation. The results obtained in this study highlighted that the biological properties of HAp:PDMS layers could be influenced by irradiation. POLYM. ENG. SCI., 59:2406–2412, 2019. © 2019 Society of Plastics Engineers