The effect of HRG gas addition on diesel engine combustion characteristics and exhaust emissions

Extensive studies have been dedicated in the last decade to the possibility to use hydrogen in the dual-fuel mode to improve combustion characteristics and emissions of a diesel engine. The results of these studies, using pure hydrogen or hydrogen containing gas produced through water electrolysis, are notably different.The present investigation was conducted on a tractor diesel engine running with small amounts of the gas—provided by a water electrolyzer—aspirated in the air stream inducted in the cylinder. The engine was operated at light and medium loads and various speeds.It was found that the addition of HRG gas has a slight negative impact, up to 2%, on the engine brake thermal efficiency. Smoke is significantly reduced, up to 30%, with HRG enrichment, while NO_x concentrations vary in both senses, up to 14%, depending on the engine operation mode. A relative small amount of HRG gas can be used with favorable effects on emissions and with a small penalty in thermal efficiency.     

Molecularly imprinted “bulk” copolymers as selective sorbents for gallic acid

We report the synthesis of molecularly imprinted sorbents, selective for gallic acid. The particles were prepared by using acrylic acid, acrylonitrile, and hydroxyethyl methacrylate as functional monomers, whereas ethyleneglycol dimethacrylate and 1,4‐buthanediol dimethacrylate were used as crosslinkers. Preparation and manipulation protocols were adjusted considering template's nature. To highlight the influence of monomer/crosslinker nature upon imprinted particles, the adsorption capacity, the imprinting factor, and the distribution and selectivity coefficients were calculated. An imprinting factor of 3.53 and a selectivity coefficient of 6.86 were found for hydroxyethyl methacrylate/ethylene glycol methacrylate system. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci. 2013     

Quantised sine signals estimation algorithm for portable digital signal processor based instrumentation

The principles for the development of portable instrumentation equipment (multimeters, frequency meters, etc.) using quantised sine signals, with a common unknown fixed frequency, and an estimation algorithm implemented on digital signal processors (DSPs) are described. An unknown internal sine signal is generated. For measurements, analog to digital converters (ADCs) acquire multiple samples of sine signals, which are quantised and transmitted to the DSP. A precise quantised sine signal, with a common unknown fixed frequency, signal estimation algorithm, for DSP-based instrumentation, is presented. An iterative process is performed to obtain amplitudes, phases, dc components, common frequency and to control the ADC number of bits. Final solutions depend on the initial values, obtained using different classical estimation algorithms. The accuracy of the initial values of iterations and the number of used points have a large influence on the speed of convergence. The algorithm stops when quantisation conditions are satisfied.     

Quantisation-based video watermarking in the wavelet domain with spatial and temporal redundancy

In this article we introduce a new public digital watermarking technique for video copyright protection working in the discrete wavelet transform domain. The scheme uses binary images as watermarks. These are embedded in the detail wavelet coefficients of the middle wavelet sub-bands. The method is a combination of spread spectrum and quantisation-based watermarking. Every bit of the watermark is spread over a number of wavelet coefficients with the use of a secret key. The resilience of the watermarking algorithm was tested against a series of eight different attacks using different videos. To improve the resilience of the algorithm we use error correction codes and embed the watermark with spatial and temporal redundancy. The proposed method achieves a very good perceptual quality with mean peak signal-to-noise ratio values of the watermarked videos of more than 40 dB and high resistance to a large spectrum of attacks.     

Application of Optimal Homotopy Asymptotic Method for solving nonlinear equations arising in heat transfer

We consider one of the newest analytical methods, the Optimal Homotopy Asymptotic Method (OHAM), to solve nonlinear equations arising in heat transfer. Two specific applications are considered: cooling of a lumped system with variable specific heat and the temperature distribution equation in a thick rectangular fin radiation to free space. Results obtained by OHAM, which does not need small parameters are compared with numerical results and a very good agreement was found. This method provides us with a convenient way to control the convergence of approximation series and adjust convergence regions when necessary. The results reveal that the proposed method is explicit, effective and easy to use.     

Gas Sensing of NiO‐SCCNT Core–Shell Heterostructures: Optimization by Radial Modulation of the Hole‐Accumulation Layer

Hierarchical core–shell (C–S) heterostructures composed of a NiO shell deposited onto stacked‐cup carbon nanotubes (SCCNTs) are synthesized by atomic layer deposition (ALD). A film of NiO particles (0.80–21.8 nm in thickness) is uniformly deposited onto the inner and outer walls of the SCCNTs. The electrical resistance of the samples is found to increase of many orders of magnitude with the increasing of the NiO thickness. The response of NiO–SCCNT sensors toward low concentrations of acetone and ethanol at 200 °C is studied. The sensing mechanism is based on the modulation of the hole‐accumulation region in the NiO shell layer upon chemisorption of the reducing gas molecules. The electrical conduction mechanism is further studied by the incorporation of an Al₂O₃ dielectric layer at NiO and SCCNT interfaces. The investigations on NiO–Al₂O₃–SCCNT, Al₂O₃–SCCNT, and NiO–SCCNT coaxial heterostructures reveal that the sensing mechanism is strictly related to the NiO shell layer. The remarkable performance of the NiO–SCCNT sensors toward acetone and ethanol benefits from the conformal coating by ALD, large surface area of the SCCNTs, and the optimized p‐NiO shell layer thickness followed by the radial modulation of the space‐charge region.     

ICI Reduction in OFDM Systems Using Phase Modified Sinc Pulse

This paper is focused on the problem of reducing the intercarrier-interference (ICI) power in the transmission over Orthogonal Frequency Division Multiplexing Systems (OFDM) using pulse shaping methods. A new pulse was proposed here and it was investigated in terms of ICI interference. It appears to be suitable for transmission in OFDM systems with carrier frequency offset. The results obtained by calculations show that the performance improvements are significant for reducing average intercarrier-interference (ICI) power and increasing the ratio of average signal power to average ICI power (SIR).     

Facile Microwave Assisted Synthesis of Silver Nanostars for Ultrasensitive Detection of Biological Analytes by SERS

We report a very simple, rapid and reproducible method for the fabrication of anisotropic silver nanostars (AgNS) that can be successfully used as highly efficient SERS substrates for different bioanalytes, even in the case of a near-infra-red (NIR) excitation laser. The nanostars have been synthesized using the chemical reduction of Ag⁺ ions by trisodium citrate. This is the first research reporting the synthesis of AgNS using only trisodium citrate as a reducing and stabilizing agent. The key elements of this original synthesis procedure are rapid hydrothermal synthesis of silver nanostars followed by a cooling down procedure by immersion in a water bath. The synthesis was performed in a sealed bottom flask homogenously heated and brought to a boil in a microwave oven. After 60 s, the colloidal solution was cooled down to room temperature by immersion in a water bath at 35 °C. The as-synthesized AgNS were washed by centrifugation and used for SERS analysis of test molecules (methylene blue) as well as biological analytes: pharmaceutical compounds with various Raman cross sections (doxorubicin, atenolol & metoprolol), cell lysates and amino acids (methionine & cysteine). UV-Vis absorption spectroscopy, (Scanning) Transmission Electron Microscopy ((S)TEM) and Atomic Force Microscopy (AFM) have been employed for investigating nanostars’ physical properties.     

Cardiac Toxicity Associated with Immune Checkpoint Inhibitors: A Systematic Review

Immune checkpoint inhibitors (ICIs) are an important advancement in the field of cancer treatment, significantly improving the survival of patients with a series of advanced malignancies, like melanoma, non-small cell lung cancer (NSCLC), hepatocellular carcinoma (HCC), renal cell carcinoma (RCC), and Hodgkin lymphoma. ICIs act upon T lymphocytes and antigen-presenting cells, targeting programmed cell death protein 1 (PD1), programmed cell death protein ligand 1 (PD-L1), and cytotoxic T-lymphocyte antigen 4 (CTLA-4), breaking the immune tolerance of the T cells against malignant cells and enhancing the body’s own immune response. A variety of cardiac-adverse effects are associated with ICI-based treatment, including pericarditis, arrhythmias, cardiomyopathy, and acute coronary syndrome, with myocarditis being the most studied due to its often-unexpected onset and severity. Overall, Myocarditis is rare but presents an immune-related adverse event (irAE) that has a high fatality rate. Considering the rising number of oncological patients treated with ICIs and the severity of their potential adverse effects, a good understanding and continuous investigation of cardiac irAEs is of the utmost importance. This systematic review aimed to revise recent publications (between 2016–2022) on ICI-induced cardiac toxicities and highlight the therapeutical approach and evolution in the selected cases.