Natural carbonation of aged alkali-activated slag concretes

Alkali-activated slag concretes stored for 7 years under atmospheric conditions are assessed, and the structural characteristics of naturally carbonated regions are determined. Concretes formulated with a 400 kg/m³ and water/binder (w/b) ratio between 0.42 and 0.48 present similar natural carbonation depths, although these concretes report different permeabilities after 28 days of curing. The inclusion of increased contents of binder leads to a substantial reduction of the CO₂ penetration in these concretes, so that negligible carbonation depth values (2 mm) are identified in concretes formulated with 500 kg/m³ of binder. Calcite, vaterite, and natron are identified as the main carbonation products formed in these concretes. These observations differ from the trends which would be expected in comparable ordinary Portland cement-based concretes, which is attributable to the physical (permeability) and chemical properties of alkali-activated slag concretes promoting high long-term stability and acceptably slow carbonation progress under natural atmospheric conditions.     

Simulation of fresh concrete flow using Discrete Element Method (DEM): theory and applications

This article provides an overview of the development and the contemporary state of research in the field of simulating fresh concrete flow using the Discrete Element Method (DEM). First, this work originating from TC 222-SCF simulation of fresh concrete flow, covers the mathematical methodology, the identification of the model parameters and the link between the rheological properties of fresh concrete and the parameters of DEM-based models. Various examples of the estimation of model parameters and calibration of the model were demonstrated, followed by verifications by comparing the numerical results and the corresponding predictions by analytical formula and laboratory experiments. Furthermore, software used in concrete engineering and existing industrial applications of the developed particle models were described, showing the potential of DEM.     

Effect of different condensed tannin‐containing forages,forage maturity and nitrogen fertiliser application on the formation of indole and skatole in in vitro rumen fermentations

The objectives of this work were to establish the effect of seven different forages with a varied condensed tannin (CT) content, plant maturity and nitrogen fertiliser application on the ruminal formation of skatole and indole using an in vitro method designed to mimic rumen fermentation conditions. After 10 h of incubation, the concentration of indole and skatole was highest when incubating white clover (P < 0.05). Polyethylene glycol addition, to inhibit CT, showed that CT significantly reduced the formation of indole and skatole when incubating Lotus corniculatus, sulla, Dorynium rectum and Lotus pedunculatus (P < 0.01). Mature forage growth resulted in a significantly lower concentration of indole and skatole being formed in vitro compared to the incubation of new spring growth (P < 0.001). A higher application of nitrogen fertiliser to perennial ryegrass‐based pasture resulted in a higher crude protein concentration in the plant and a significantly higher concentration of skatole formed in vitro (P < 0.001). Forages containing CT reduced the conversion of endogenous protein to indole and skatole and plants containing a higher CT concentration tended to be more effective, but compositional differences of CT between forages may also have had an influence. New forage growth or swards that had a high application of nitrogen fertiliser promoted the formation of indole and skatole. Copyright © 2007 Society of Chemical Industry     

Tandem cationic and sol–gel photopolymerizations of a vinyl ether alkoxysilane

In the present study, a novel single hybrid monomer combining a vinylether and trimethoxysilane groups in the same molecule was synthesized by chemoselective hydrosilation and subjected to UV‐irradiation in the presence of a triarylsulfonium salt. Through the UV‐decomposition of this photoacid generator, two acid‐catalyzed processes occurred simultaneously: the cationic polymerization of the vinyl ether functions and the sol–gel polycondensation of the alkoxysilyl groups, leading to a type II polyvinyl‐polysilicate nanocomposite film. Both reaction kinetics were efficiently monitored by real‐time Fourier transform infrared spectroscopy, and the influence of different key experimental parameters was investigated (laminated conditions, UV irradiation equipment, and film thickness). A particular attention was also given to the complete characterization of the hybrid microstructure by associating ²⁹Si and ¹³C solid‐state NMR. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Synthesis and thermal behavior of poly(methyl methacrylate)/Maghnia bentonite nanocomposite prepared at room temperature via in situ polymerization initiated by a new Ni(II)α‐benzoinoxime complex

Poly(methyl methacrylate) (PMMA) and poly(methyl methacrylate)/clay nanocomposite (PMMA/OBT) were successfully prepared in dioxan at room temperature via in situ radical polymerization initiated by a new Ni(II)α‐ Benzoinoxime complex as a single component in presence of 3% by weight of an organically modified bentonite (OBT) (originated from Maghnia, Algeria) and characterized by FTIR, ¹H‐NMR and viscometry. Mainly intercalated and partially exfoliated PMMA/OBT nanocomposite was elaborated and evidenced by X‐Ray diffraction (XRD) and transmission electron microscopy (TEM). The intrinsic viscosity of PMMA/OBT nanocomposite is much higher than the one of pure PMMA prepared under the same conditions. Differential scanning calorimetry (DSC) displayed an increase of 10°C in the glass transition temperature of the elaborated PMMA/OBT nanocomposite relative to the one of pure PMMA. Moreover, the TGA analysis confirms a significant improvement of the thermal stability of PMMA/OBT nanocomposite compared to virgin PMMA: the onset degradation temperature of the nanocomposite, carried out under nitrogen atmosphere, increased by more than 45°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Minimizing metastabilities in Cu(In,Ga)Se2/(CBD)Zn(S,O,OH)/i‐ZnO‐based solar cells

Chemical bath deposited (CBD)Zn(S,O,OH) is among the alternatives to (CBD)CdS buffer layers in Cu(In,Ga)Se₂(CIGSe)‐based devices. Nevertheless, the performances reached by devices buffered with (CBD)Zn(S,O,OH) vary strongly from one sample to another and from one laboratory to another, indicating that parameters of minority impact with (CBD)CdS‐buffered devices have major influence when buffered with (CBD)Zn(S,O,OH). Moreover, the literature reports, but not systematically, the requirement of substituting the standard resistive intrinsic ZnO by (Zn,Mg)O and/or soaking the devices in ultraviolet‐containing light in order to reach optimal device operation. The present study investigates the impact of the three following parameters on the optoelectronic behavior of the Cu(In,Ga)Se₂/(CBD)Zn(S,O,OH)/i‐ZnO‐based solar cells: (i) CIGSe surface composition; (ii) (CBD)Zn(S,O,OH) layer thickness; and (iii) i‐ZnO layer resistivity. The first conclusion of this study is that all of these parameters are observed to influence the electrical metastabilities of the devices. The second conclusion is that the light soaking time needed to achieve optimal photovoltaic parameters is decreased by (i) using absorbers with Cu content close to stoichiometry, (ii) increasing the buffer layer thickness, and (iii) increasing the resistivity of i‐ZnO. By optimizing these trends, stable and highly efficient Zn(S,O,OH)‐buffered CIGSe solar cells have been fabricated. Copyright © 2014 John Wiley & Sons, Ltd.     

The digital traces of bubbles: feedback cycles between socio-economic signals in the Bitcoin economy

What is the role of social interactions in the creation of price bubbles? Answering this question requires obtaining collective behavioural traces generated by the activity of a large number of actors. Digital currencies offer a unique possibility to measure socio-economic signals from such digital traces. Here, we focus on Bitcoin, the most popular cryptocurrency. Bitcoin has experienced periods of rapid increase in exchange rates (price) followed by sharp decline; we hypothesize that these fluctuations are largely driven by the interplay between different social phenomena. We thus quantify four socio-economic signals about Bitcoin from large datasets: price on online exchanges, volume of word-of-mouth communication in online social media, volume of information search and user base growth. By using vector autoregression, we identify two positive feedback loops that lead to price bubbles in the absence of exogenous stimuli: one driven by word of mouth, and the other by new Bitcoin adopters. We also observe that spikes in information search, presumably linked to external events, precede drastic price declines. Understanding the interplay between the socio-economic signals we measured can lead to applications beyond cryptocurrencies to other phenomena that leave digital footprints, such as online social network usage.     

Pedestrian preferences with respect to roundabouts—A video-based stated preference survey

Research on user behavior and preferences has been a helpful tool in improving road safety and accident prevention in recent years. At the same time, there remain some important areas of road safety and accident prevention for which user preferences, despite their importance, have not been explored. Most road safety research has not explicitly addressed vulnerable user (pedestrians and cyclists) preferences with respect to roundabouts, despite their increasing construction around the world. The present research stems from the fact that studies related to roundabout safety have generally focused on drivers, while overlooking the importance of safety as it relates to vulnerable users, especially pedestrians. Moreover, it handles this particular issue through an approach that has not been used so far in this context; the Stated Preference (SP) survey. As such, there are two main goals (and contributions) of this work. First, to show how SP surveys can be used to investigate the importance of different design and operational features to pedestrian perceptions of safety in roundabouts. This allows us, for example, to quantify how some features of roundabouts (e.g. high traffic volume) can be compensated for by design features such as pedestrian islands. This is useful in helping to design roundabouts that pedestrians prefer and will hopefully use, to help encourage active transport. Second, to demonstrate how traffic simulation software can be successfully used to include difficult-to-communicate attributes in SP surveys.     

Graphene masks as passivation layers in the electrochemical etching of silicon

Site-specific masking with graphene films has the potential to facilitate low-cost, high-throughput micro-patterns on silicon substrates over large areas. Here, a facile approach to using graphene as a masking agent on silicon wafers for site-specific patterning is demonstrated. Graphene sheets were deposited via a sealing-tape-exfoliation method onto hydride-terminated (Si–H) silicon substrates. Raman confocal mapping showed inhibition of oxidation of the Si wafer underlying the graphene, indicating that the graphene restricts the diffusion of oxygen onto the Si surface. The graphene coated Si substrates were then electrochemically etched in an aqueous HF/ethanol (3:1 (v/v)) anodization solution. Scanning electron microscopy showed that the graphene layer successfully restricted the etching of the Si surface, however, near the edge sites of the graphene deep etching occurred.