An extended hesitant fuzzy set using SWARA-MULTIMOORA approach to adapt online education for the control of the pandemic spread of COVID-19 in higher education institutions

The world has been challenged since late 2019 by COVID-19. Higher education institutions have faced various challenges in adapting online education to control the pandemic spread of COVID-19. The present study aims to conduct a survey study through the interview and scrutinizing the literature to find the key challenges. Subsequently, an integrated MCDM framework, including Stepwise Weight Assessment Ratio Analysis (SWARA) and Multiple Objective Optimization based on Ratio Analysis plus Full Multiplicative Form (MULTIMOORA), is developed. The SWARA procedure is applied to the analysis and assesses the challenges to adapt the online education during the COVID-19 outbreak, and the MULTIMOORA approach is utilized to rank the higher education institutions on hesitant fuzzy sets. Further, an illustrative case study is considered to express the proposed idea's feasibility and efficacy in real-world decision-making. Finally, the obtained result is compared with other existing approaches, confirming the proposed framework's strength and steadiness. The identified challenges were systemic, pedagogical, and psychological challenges, while the analysis results found that the pedagogical challenges, including the lack of experience and student engagement, were the main essential challenges to adapting online education in higher education institutions during the COVID-19 outbreak.

     

Effects of Hall current and two temperatures in transversely isotropic magnetothermoelastic with and without energy dissipation due to ramp-type heat

The present article is concerned with the investigation of disturbances in a homogeneous transversely isotropic thermoelastic rotating medium with two temperatures, in the presence of the combined effects of Hall currents and magnetic field. The formulation is applied to the thermoelasticity theories developed by Green-Naghdi theories of type-II and type-III. Laplace and Fourier transform techniques are applied to solve the problem. The analytical expressions of displacements, stress components, temperature change, and current density components are obtained in the transformed domain. A numerical inversion technique has been applied to obtain the results in the physical domain. Numerical simulated results are depicted graphically to show the effect of Hall current and two temperatures on resulting quantities. Some special cases are also deduced from the present investigation.     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

Studies on microbridges of superconducting YBCO thin film

Critical current densities of the superconducting Y-Ba-Cu-O (YBCO) films have been observed to decrease with the increase of power of microwave radiation. Presence of Josephson type of junctions in the microbridges has been established from the microwave irradiation and magnetic field studies. BCS energy gap parameter (2/kT _c ) has been calculated from thedI/dV characteristics and found to be 3.7 at 13 K.     

Free-living inferential modeling of blood glucose level using only noninvasive inputs

The goal of this work is to present a causation modeling methodology with the ability to accurately infer blood glucose levels using a large set of highly correlated noninvasive input variables over an extended period of time. These models can provide insight to improve glucose monitoring, and glucose regulation through advanced model-based control technologies. The efficacy of this approach is demonstrated using real data from a type 2 diabetic (T2D) subject collected under free-living conditions over a period of 25 consecutive days. The model was identified and tested using eleven variables that included three food variables as well as several activity and stress variables. The model was trained using 20 days of data and validated using 5 days of data. This gave a fitted correlation coefficient of 0.70 and an average absolute error (AAE) (i.e., the average of the absolute values for the measured glucose concentration minus modeled glucose concentration) of 13.3 mg/dL for the validation data. This AAE result was significantly better than the subject’s personal glucose meter AAE of 15.3 mg/dL for replicated measurements.     

An integrated intelligent computing model for the interpretation of EMG based neuromuscular diseases

Intelligent computing system (ICS) and knowledge-based system (KBS) have been widely used in the detection and interpretation of EMG (electromyography) based diseases. Heuristic-based detection methods of EMG parameters for a particular disease have also been reported in the literature but little effort has been made by researchers to combine rule-based reasoning (RBR) and case-based reasoning of KBS, and ANN (artificial neural nets) of ICS. Integrating the methods in KBS and ICS improves the computational and reasoning efficiency of the problem-solving strategy. We have developed an integrated model of CBR and RBR for generating cases, and ANN for matching cases for the interpretation and diagnosis of neuromuscular diseases. We have hierarchically structured the neuromuscular diseases in terms of their physio-pyscho (muscular, cognitive and psychological) parameters and EMG based parameters (amplitude, duration, phase etc.). Cumulative confidence factor is computed at different node from lowest to highest level of hierarchal structure in the process of diagnosis of the neuromuscular diseases. The diseases considered are Duchenne muscular dystrophy, Polymyostits, Endocrine myopathy, Metabolic myopathy, Neuropathy, Poliomyletis and Myasthenia gravis. The basic objective of this work is to develop an integrated model of RBR, CBR and ANN in which RBR is used to hierarchically correlate the sign and symptom of the disease and also to compute cumulative confidence factor (CCF) of the diseases. CBR is used for diagnosing the neuromuscular diseases and to find the relative importance of sign and symptoms of a diseases to other diseases and ANN is used for matching process in CBR.     

A password based authentication scheme for wireless multimedia systems

In this digital era, where Internet of Things (IoT) is increasing day by day, use of resource constrained devices is also increasing. Indeed, the features such as low cost, less maintenance, more adaptive to hostile environment, etc. make the wireless multimedia devices to be the best choice as the resource constrained devices. For the security, the end user device requires to establish the session key with the server before transferring the data. Mobile is one of the device having more and more usage as wireless multimedia device in recent years. In 2013, Li et al. proposed an efficient scheme for the wireless mobile communications and claimed it to be secure against various attacks. Recently, Shen et al. claimed that the scheme of Li et al. is still vulnerable to the privileged insider attack, the stolen verifier attack and finally proposed a scheme to withstand the mentioned and other attacks. However, in this paper we claim that the scheme of Shen et al. is still susceptible to the user anonymity, the session specific temporary information attack and the replay attack. In addition, Shen et al.’s scheme requires more time due to many operations. Further, we propose an efficient scheme that is secure against various known attacks and due to reduced time complexity our scheme is a preferred choice for the wireless mobile networks and hence for wireless multimedia systems.     

Semantic web reasoners and languages

Semantic web reasoners and languages enable the semantic web to function. Some of the latest reasoning models developed in the last few years are: DLP, FaCT, RACER, Pellet, MSPASS, CEL, Cerebra Engine, QuOnto, KAON2, HermiT and others. Some software tools such as Protégé, Jena and others also have been developed, which provide inferencing as well as ontology development and management environments. These reasoners usually differ in their inference procedures, supporting logic, completeness of reasoning, expressiveness and implementation languages. Various semantic web languages with increasing expressive power continue to be developed for describing web services. We survey the some of the more recent languages like OWL-S (Ontology Web Language-Schema), WSML (Web Service Modeling Language), SWRL (Semantic Web Rule Language) and others that have been tested in early use. We also survey semantic web reasoners and their relationship to these languages.     

Creep fracture in Al-SiC metal-matrix composites

Creep fracture behaviour of pure aluminium-matrix composites with 10–30 vol% SiC particulates at 623 K is reported. A comparison of tensile and compression creep data shows the existence of a transition stress. Above this transition stress no steady state creep is observed in tension. This transition stress is related to a transition from intergranular to transgranular fracture. The origin of transition stress is perhaps associated with the diffusional relaxation of stress concentration at the matrix/particle interface by lattice diffusion. The intergranular creep fracture of composites appears to be similar to that of unreinforced aluminium and it is power-law creep controlled. The transgranular creep fracture occurs by void nucleation and growth. The nucleation strain for voids is quite small and hence the tertiary stage starts before the end of the primary stage. The ductile fracture models overestimate the strain to fracture and do not predict the observed stress dependence of strain to fracture.