Facteur de couplage phase-amplitude des diodes lasers avec absorbant saturable

The phase-amplitude coupling factor (α-factor) is one of the fundamental parameters of semiconductor lasers. We show that this factor can be evaluated by time-resolved spectroscopic measurements in pulsed regime. Experiments are carried out with injectionseeded single-mode GaAs lasers whose active stripe includes regions of saturable absorption made by ion implantation. We show that the measured pulse downchirp is proportional to pulse energy. The downchirp amplitude is found to approach four laser cavity intermode spacings at the highest energies. Correspondingly, the ±-values can be five times higher than those reported to date in litterature. High a-values are confirmed in pulse compression experiments. Several mechanisms are proposed to interprete these new results.     

Determination of As(III) and As(V) in oilseeds by chronopotentiometric stripping analysis: development of a method

Chronopotentiometric stripping analysis (CSA) was used for selective determination of As(III) and As(V) in different oilseeds. After the optimization of experimental parameters an appropriate procedure for sample pretreatment was developed. A detection limit of 2 microg/dm3 for As(III) was obtained with an electrolysis time of 600 s. This method was used for arsenic determination in sunflower, pumpkin, and flax seed, as well as for soy flakes and almond.     

Application of the Cascade-Correlation network to the classification of circularly scanned images

This paper describes an application of the Cascade-Correlation (CC) network to pattern recognition. The pattern recognition task was to simulate an automatic vision inspection system that had to properly classify five different objects. The feature vectors were extracted from 2D images of circularly scanned images and used as inputs for a neural network that was then trained to classify an unknown presented object. The results show that the CC network is viable tool in pattern recognition tasks. It is able to classify partially occluded objects with high accuracy, and to considerably improve classification of noisy images based on simple histogram trimming preprocessing.     

Improved Adhesion, Growth and Maturation of Vascular Smooth Muscle Cells on Polyethylene Grafted with Bioactive Molecules and Carbon Particles

High-density polyethylene (PE) foils were modified by an Ar⁺ plasma discharge and subsequent grafting with biomolecules, namely glycine (Gly), polyethylene glycol (PEG), bovine serum albumin (BSA), colloidal carbon particles (C) or BSA and C (BSA + C). As revealed by atomic force microscopy (AFM), goniometry and Rutherford Backscattering Spectroscopy (RBS), the surface chemical structure and surface morphology of PE changed dramatically after plasma treatment. The contact angle decreased for the samples treated by plasma, mainly in relation to the formation of oxygen structures during plasma irradiation. A further decrease in the contact angle was obvious after glycine and PEG grafting. The increase in oxygen concentration after glycine and PEG grafting proved that the two molecules were chemically linked to the plasma-activated surface. Plasma treatment led to ablation of the PE surface layer, thus the surface morphology was changed and the surface roughness was increased. The materials were then seeded with vascular smooth muscle cells (VSMC) derived from rat aorta and incubated in a DMEM medium with fetal bovine serum. Generally, the cells adhered and grew better on modified rather than on unmodified PE samples. Immunofluorescence showed that focal adhesion plaques containing talin, vinculin and paxillin were most apparent in cells on PE grafted with PEG or BSA + C, and the fibres containing α-actin, β-actin or SM1 and SM2 myosins were thicker, more numerous and more brightly stained in the cells on all modified PE samples than on pristine PE. An enzyme-linked immunosorbent assay (ELISA) revealed increased concentrations of focal adhesion proteins talin and vinculin and also a cytoskeletal protein β-actin in cells on PE modified with BSA + C. A contractile protein α-actin was increased in cells on PE grafted with PEG or Gly. These results showed that PE activated with plasma and subsequently grafted with bioactive molecules and colloidal C particles, especially with PEG and BSA + C, promotes the adhesion, proliferation and phenotypic maturation of VSMC.     

Solids flow pattern in gas-flowing solids-fixed bed contactors. Part I: Experimental

An experimental investigation of the solids flow pattern in gas-flowing solids-fixed bed contactors is presented. The apparatus and procedures for determining the dynamic and static solids holdups, solids residence time distribution and the extent and rate of the exchange between particles in the static and dynamic solids holdup are described in detail.Experiments were performed in a bench scale system, containing a column (diameter ) packed with glass beads of 16 mm in diameter packed up to the height of 0.8 m. Tracer experiments with a step input in flowing solids phase were used for determining the residence time distribution and exchange between particles. Fine solids (spheres with mean diameter of ) of two different colors (all other properties being the same) were used in the tracer experiments to determine the residence time distribution and the exchange between static and dynamic solids holdup. In both types of experiments, the response curves have been obtained via color analysis of digital photos. All experiments have been repeated at different operating conditions, with a broad variation of solids mass flux and gas velocity, and reproducibility at set conditions was checked.The obtained experimental results are discussed and the observed important characteristics of the solids flow pattern are outlined. The effects of the solids flux and gas velocity on the solids flow pattern are presented and analyzed.     

The effect of composition of a polymeric coating on the biofilm formation of bacteria and filamentous fungi

Functionality of polymeric coating, especially in terms of anti-corrosive properties and stability, can be negatively influenced by formation of either bacterial or fungal biofilm on its surface. Herein, the epoxy-ester resin based polymeric coating was filled with pigments (natural silicon dioxide diatomite, natural wollastonite, tungstate and molybdate). Pigments was modified by conducting polymers (polyaniline phosphate, polypyrrole phosphate, poly(p-phenylenediamine) phosphate and ZnFe₂O₄). Impact of modified pigments on the surface energy and formation of biofilm were tested. The use of various biofilm forming species of both the bacteria and fungi filled a knowledge gap about their behavior on polymeric coatings.     

Influence of processing on stability,microstructure and thermoelectric properties of Ca3Co4 − xO9 + δ

Due to high figure of merit, Ca₃Co_4 ? xO_9 + δ (CCO) has potential as p-type material for high-temperature thermoelectrics. Here, the influence of processing including solid state sintering, spark plasma sintering and post-calcination on stability, microstructure and thermoelectric properties is reported. By a new post-calcination approach, single-phase materials were obtained from precursors to final dense ceramics in one step. The highest zT of 0.11 was recorded at 800 °C for CCO with 98 and 72% relative densities. In situ high-temperature X-ray diffraction in air and oxygen revealed a higher stability of CCO in oxygen (～970 °C) than in air (～930 °C), with formation of Ca₃Co₂O₆ which also showed high stability in oxygen, even at 1125 °C. Since achievement of phase pure high density CCO by post-calcination method in air is challenging, the phase stability of CCO in oxygen is important for understanding and further improvement of the method.     

Long term stability of electrocaloric response in barium zirconate titanate

The stability of the electrocaloric effect under electric field cycling is an important consideration in the development of solid-state cooling devices. Here we report measurements carried out on Ba(Zr_0.2Ti_0.8)O₃ ceramics which reveal that the adiabatic temperature change, polarization-electric field hysteresis loops and dielectric permittivity/loss show stable behavior up to 10⁵ cycles. We further demonstrate that the loss in electrocaloric response observed after 10⁵ cycles is associated with the migration of oxygen vacancies. As a result, the electrical properties of the material are changed leading to an increase in leakage current and Joule heating. Reversing the polarity of the electric field after every 10⁵ cycles changes the migration direction of oxygen vacancies, thereby preventing charge accumulation at grain boundaries and electrodes. By doing so, the electrocaloric stability is improved and the adiabatic temperature remains constant even after 10⁶ cycles, much higher than achieved in commercially available barium titanate ceramics.