Influence of shear in the crystallization of polyethylene in the presence of SWCNTs

It is well accepted that due to epitaxy matching, carbon nanotubes are good nucleating agent for linear polyethylene. We demonstrate that not only in the quiescent conditions but also at the relatively low shear rates the presence of single-walled carbon nanotube (SWCNT) accelerates the crystallization kinetics of polyethylene (PE). The influence of SWCNTs on the crystallization kinetics in the quiescent condition is followed with the help of rheological and differential scanning calorimetry studies. The influence of flow on the stretch of the polymer chain is probed using time-resolved small-angle X-ray scattering (SAXS) and is verified with the Deborah number. SAXS data indicates that the strong shearing conditions (shear rate > 50/s for 1 s) are requisite to form shish-kebab structure in the neat polymer. However, for the low shear (shear rate < 50/s for 1 s), the shish-kebab structure that arises due to chain orientation is enhanced in the presence of SWCNTs. The development of oriented structures in SWCNT/PE composites and their absence in the neat polymer under low shear rate indicates that the presence of SWCNTs plays a significant role in the chain orientation. Overall, the results manifest the influence of SWCNTs on chain relaxation of the polymer.     

Sulfur Nanoparticles Synthesis and Characterization from H2S Gas, Using Novel Biodegradable Iron Chelates in W/O Microemulsion

Sulfur nanoparticles were synthesized from hazardous H₂S gas using novel biodegradable iron chelates in w/o microemulsion system. Fe³⁺–malic acid chelate (0.05 M aqueous solution) was studied in w/o microemulsion containing cyclohexane, Triton X-100 and n-hexanol as oil phase, surfactant, co-surfactant, respectively, for catalytic oxidation of H₂S gas at ambient conditions of temperature, pressure, and neutral pH. The structural features of sulfur nanoparticles have been characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), energy dispersive spectroscopy (EDS), diffused reflectance infra-red Fourier transform technique, and BET surface area measurements. XRD analysis indicates the presence of α-sulfur. TEM analysis shows that the morphology of sulfur nanoparticles synthesized in w/o microemulsion system is nearly uniform in size (average particle size 10 nm) and narrow particle size distribution (in range of 5–15 nm) as compared to that in aqueous surfactant systems. The EDS analysis indicated high purity of sulfur (>99%). Moreover, sulfur nanoparticles synthesized in w/o microemulsion system exhibit higher antimicrobial activity (against bacteria, yeast, and fungi) than that of colloidal sulfur.     

Antioxidant and Prooxidant Effects of Metal Dafonates on the NADPH-Dependent Lipid Peroxidation in the Murine Hepatic Microsomal System

Dafone inhibits the lipid peroxidation significantly in a concentration dependent manner. The inhibition was found to be an uncompetitive type with the inhibition constant (Ki) of 62.5muM On the other hand complexation with metal ions results in a significant reversal from antioxidant to pro-oxidant properties for the resulting complexes which are cationic and with associated halometallate anions. The nature of the potentiation in case of the ferric compound was of competitive type with activation constant (Ka) having the value 32.5muM. The neutral copper-dafonate complex, however, inhibits lipid peroxidation with increase in concentration.     

Buckminsterfullerene's (C60) octanol-water partition coefficient (Kow) and aqueous solubility

To assess the risk and fate of fullerene C60 in the environment, its water solubility and partition coefficients in various systems are useful. In this study, the log Kow of C60 was measured to be 6.67, and the toluene-water partition coefficient was measured at log Ktw = 8.44. From these values and the respective solubilities of C60 in water-saturated octanol and water-saturated toluene, C60's aqueous solubility was calculated at 7.96 ng/L(1.11 x 10(-11) M) for the organic solvent-saturated aqueous phase. Additionally, the solubility of C60 was measured in mixtures of ethanol-water and tetrahydrofuran-water and modeled with Wohl's equation to confirm the accuracy of the calculated solubility value. Results of a generator column experiment strongly support the hypothesis that clusters form at aqueous concentrations below or near this calculated solubility. The Kow value is compared to those of other hydrophobic organic compounds, and bioconcentration factors for C60 were estimated on the basis of Kow.     

Physical and thermal behaviour of Sr-La-Al-B-Si based SOFC glass sealants as function of SrO content and B2O3/SiO2 ratio in the matrix

A series of SOFC glass sealants with composition SrO (x), La₂O₃ (15), Al₂O₃ (15), B₂O₃ (40 − x), and SiO₂ (30) [x = 10, 15, 20, 25 and 30] (wt.%) [SLABS] are investigated for their structure property correlations at different compositions. Quantitative Fourier transform infrared spectroscopy shows structural rigidity with increasing SrO content, as demonstrate by an increase in the Si-O-Si/O-Si-O bending and B-O-B stretching frequencies. The role of SrO as a modifier dominates the control of the structure and behaviour of glasses compared with the effect of network formers, i.e., the B₂O₃/SiO₂ ratio. Consequent to the structural changes, increasing substitution of B₂O₃ by SrO the glasses causes increases in the density, glass transition temperature and dilatometric softening point. On the other hand, the crystallization temperatures show a decreasing trend and the coefficient of thermal expansion increases with increase in substitution.     

Incineration of diesel particulate matter using induction heating technique

Incineration of diesel particulate matter for the regeneration of a mesh-type particulate-filter is achieved using induction heating technique. Heating of the diesel particulates deposited on the mesh-type particulate-filter at around 600 °C is investigated. In the case of the particulate filter, stainless-steel mesh-type filters are considered and the influence on filtering efficiency, the engine performance due to back-pressure generation is studied. Theoretical estimation shows that induction heating approach for the regeneration via exhaust gas heating requires high power (>3 kW). On the other hand, regeneration of mesh-type particulate-filter using induction heating technique requires a low input power of around 0.5 kW in the off-line condition. The proposed mesh-type particulate-filter allowed a filtration efficiency of around 30–40% at lower engine speeds and part loads. Particulate combustion through induction heating at static condition is studied and power required for mesh-type filter and sintered metal filter regeneration during engine operation is estimated theoretically.     

Optimum stand density of Leucaena leucocephala for wood production in Andhra Pradesh, Southern India

Leucaena leucocephala is widely used as raw material for the manufacture of paper and packaging material and in biomass based power plants in the state of Andhra Pradesh, Southern India. Experiments were conducted to study the affect of tree density on the growth, biomass partitioning and wood productivity. Six treatments 1 × 1 m, 1.3 × 1.3 m, 3 × 0.75 m, 3 × 1 m, 5 × 0.8 m and 3 × 2 m corresponding to a tree density of 10,000, 6666, 4444, 3333, 2500 and 1666 were evaluated with leucaena variety K636. At 51 months after planting, spacings significantly influenced tree height, diameter at breast height (DBH), number of branches and biomass partitioning. Wider tree rows resulted in greater tree height and diameter growth resulting in higher per plant productivity. At harvest, 70% of trees in 3 × 2 m attained a diameter of more than 7.5 cm, while 35% of the trees attained the same DBH in 1 × 1 m spacing. Increased spacing levels decreased the relative amount of growth allocated to the bole of the tree. Marketable biomass yield was highest with 1 × 1 m spacing. Spacing of 3 × 0.75 m produced marketable biomass comparable to that of 1 × 1 m and greater proportion of stems with more than 5 cm diameter. Leucaena can be grown at 3 × 0.75 m spacing either for pulpwood or fuelwood depending on the prevailing market prices and demand.     

Enzymic peeling of Indian grapefruit (Citrus paradisi)

The tough nature of grapefruit (Citrus paradisi) peel and its close adherence to the inner fruit sections limit the industrial processing of grapefruit. Two commercial peeling enzymes coded as ‘Brand A’ and ‘Brand B’ were studied for enzymic peeling of Indian grapefruit by vacuum infusion. The peeling process was optimised with respect to process parameters such as scalding time, enzyme concentration, vacuum infusion time and incubation time. © 2001 Society of Chemical Industry     

Investigation of crystallization kinetic of SrO-La2O3-Al2O3-B2O3-SiO2 glass and its suitability for SOFC sealant

Strontium-lanthanum-aluminoborosilicate (SrO-La₂O₃-Al₂O₃-B₂O₃-SiO₂) (SLABS) glass was prepared for sealant material in planar Solid Oxide Fuel Cells (pSOFC). Differential Thermal Analysis of the glass showed the formation of two crystalline phases, first one 807 °C and the second phase at 1021 °C. Crystallization kinetic of the first crystalline phase was investigated by differential thermal analysis (DTA) and using the JMA-kinetic model. The activation energy for crystallization was calculated to be 114.04 kJ/mol with frequency factor 5.9 × 10³. Coefficient of Thermal Expansion (CTE) of the glass was measured to be 9.72 × 10⁻⁶/°C. Optical band gap of the glass was measured to be 3.07 eV. Conductivity measured by Impedance spectroscopy found to be 5.68 × 10⁻⁷ S cm⁻¹ at 600 °C and it increased with temperature to 2.68 × 10⁻⁶ S cm⁻¹ at 800 °C. Activation energy for electrical conduction was measured to be 66.12 kJ/mol. Wetting behavior of the glass on a ferritic steel substrate was investigated under hot stage microscopy. It showed initial deformation temperature (IDT) 754 °C, softening temperature (ST) 840 °C, hemispherical temperature (HT) 1108 °C and flow temperature (FT) 1279 °C.     

Convective Heat Transfer and Fluid Dynamic Characteristics of SiO2 Ethylene Glycol/Water Nanofluid

Nanofluids comprised of silicon dioxide (SiO₂) nanoparticles suspended in a 60:40 (% by weight) ethylene glycol and water (EG/water) mixture were investigated for their heat transfer and fluid dynamic performance. First, the rheological properties of different volume percents of SiO₂ nanofluids were investigated at varying temperatures. The effect of particle diameter (20 nm, 50 nm, 100 nm) on the viscosity of the fluid was investigated. Subsequent experiments were performed to investigate the convective heat transfer enhancement of nanofluids in the turbulent regime by using the viscosity values measured. The experimental system was first tested with EG/water mixture to establish agreement with the Dittus-Boelter equation for Nusselt number and with Blasius equation for friction factor. The increase in heat transfer coefficient due to nanofluids for various volume concentrations has been presented. Pressure loss was observed to increase with nanoparticle volume concentration. It was observed that an increase in particle diameter increased the heat transfer coefficient. Typical percentage increases of heat transfer coefficient and pressure loss at fixed Reynolds number are presented.