FRACTURE ASSESSMENT FOR SECONDARY LOADS

The fracture assessment of structures subjected to secondary loading systems was studied by FEM-analysis of a few illustrative two-dimensional examples. The first example is an edge-cracked plate with a thermal gradient. The FEM-calculations revealed that a purely elastic analysis yielded J-values that are in most cases considerably more conservative than the ones calculated from an elastic-plastic analysis. The results were further compared with different engineering type non-linear estimates. As a second example a crack emanating from a semi-circular notch in a rectangular plate was chosen. The plate was subjected to uniaxial tension along its boundaries. It turned out that for the cases considered the J-values were fairly close to those elastically predicted.     

Variability in the proliferative responsiveness of cultured human vascular smooth muscle cells to alpha-thrombin

alpha-Thrombin, a key enzyme of the coagulation cascade, is also a potent mitogen for many cell types. In the present study, the responsiveness to alpha-thrombin of cultured human vascular smooth muscle cells (HVSMC) derived from either vein or normal and atherosclerotic arteries was investigated. All HVSMC populations examined responded mitogenically to alpha-thrombin. However, the extent of this response varied between different cell populations. No significant differences were observed between HVSMC derived from vein versus artery or atherosclerotic versus normal tissues. The responsiveness of a specific HVSMC culture to alpha-thrombin was not affected by cell density and remained constant over several passages. Unlike platelet-derived growth factor BB (PDGF-BB), alpha-thrombin did not exhibit any significant chemotactic effects on HVSMC or induce their anchorage independent growth in semi-solid medium. The hypothesis that the observed variability in HVSMC responsiveness to alpha-thrombin is due to the heterogeneity of cultured HVSMC is raised and discussed.     

Space-domain method of moments solution for a strip on a dielectricslab

This paper presents a space-domain method of moments (MoM) solution to the problem of a strip dipole on a dielectric slab. The solution involves the use of a special junction basis function which models the nearly singular polarization currents in the vicinity of the strip/dielectric junction     

A unified theory of thin material wires [EM scattering]

The author presents an integral equation and method of moments (MM) solution to the problem of scattering by a thin material wire of circular cross section. In general the material wire has permittivity and permeability different from those of free space. The wire of radius a must be sufficiently thin so that k₀a ≪1, where k₀ is the free space wavenumber. However, there is no restriction on |k|a, where k is the wavenumber in the material wire. The method is referred to as unified in that it applies to thin material wires of arbitrary complex permittivity and permeability. Thus, a single or unified formulation applies to a low-density dielectric/ferrite wire or to a highly conducting metallic wire     

Effects of order of presentation on perceptions of the counselor.

Attempted to determine whether the order in which 2 counselors were presented on videotape would affect ratings of their performances. 70 participants (63 women and 7 men) randomly assigned to 2 groups viewed and rated counseling interviews conducted by C. Rogers and E. L. Shostrom. Groups differed only in the order of presentation of counselors. The resulting 2?×?2 split-plot factorial design had 1 between-Ss factor (order of presentation) and 1 within-S factor (counselor). A multivariate analysis of variance (MANOVA) yielded a statistically significant interaction, indicating that the order in which counselors were evaluated significantly affected the magnitude of ratings of their performance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Lifetime Measurements on a High-Reliability RF-MEMS Contact Switch

Radio frequency microelectromechanical systems (RF MEMS) cantilever contact switches have been tested for lifetime. The mean cycles-to-failure measured on an ensemble of switches was 430 billion switch cycles. The longest lifetime exhibited without degradation of the switch was 914 billion switch cycles. The devices were switched at 20 kHz with an incident RF frequency of 10 GHz and an incident RF power of 20 dBm. Testing was performed continuously over a period of approximately 18 months. The switches were operated in a cold-switched mode.     

A comparison of gene organization in the zwf region of the genomes of the cyanobacteria Synechococcus sp. PCC 7942 and Anabaena sp. PCC 7120

The region of the genome encoding the glucose-6-phosphate dehydrogenase gene zwf was analysed in a unicellular cyanobacterium, Synechococcus sp. PCC 7942, and a filamentous, heterocystous cyanobacterium, Anabaena sp. PCC 7120. Comparison of cyanobacterial zwf sequences revealed the presence of two absolutely conserved cysteine residues which may be implicated in the light/dark control of enzyme activity. The presence in both strains of a gene fbp, encoding fructose-1,6-bisphosphatase, upstream from zwf strongly suggests that the oxidative pentose phosphate pathway in these organisms may function to completely oxidize glucose 6-phosphate to CO2. The amino acid sequence of fructose-1,6-bisphosphatase does not support the idea of its light activation by a thiol/disulfide exchange mechanism. In the case of Anabaena sp. PCC 7120, the tal gene, encoding transaldolase, lies between zwf and fbp.