加快结构调整，促进经济发展方式转变

加快结构调整、促进经济发展方式转变是关系国民经济全局紧迫而重大的战略任务。本文以严谨的逻辑和充分的事实依据的基础,对成都市加快结构调整,促进经济发展方式转变的意义,方向和路径等进行了阐述。     

安全套生产线计算机群控与制造执行系统的研制

针对多条安全套生产线自动控制的要求,采用分布式结构设计了安全套生产线计算机群控系统,并初步研究了MES的设计问题.介绍了安全套生产的工艺要求、系统的控制方案和硬件、软件的设计.计算机群控系统由一个主节点和多个从节点组成,主节点监督和管理所有从节点, 从节点测量和控制生产过程参数.制造执行系统实现了对生产过程的优化和调度.实际应用表明,整个系统性能稳定可靠,满足了生产要求,获得了良好的经济效益.     

青县电子机箱产业集群核心竞争力评价

根据核心竞争力理论,运用层次分析法,构建了对产业集群的核心竞争力评价体系,并用此方法对青县的的电子机箱产业进行了实证分析.研究结果表明青县电子机箱行业的核心竞争力不强,其中资源整合与控制能力,技术创新能力、组织管理能力、人力资源竞争力和企业文化聚合力较弱、在此基础上提出了相应的政策建议.     

一种汽轮机组排汽焓和最优初压在线计算方法

通过对已往的汽轮机变工况计算方法的分析,提出了以汽轮机末级抽汽或次末级抽汽(过热蒸汽状态)为计算起点的汽轮机顺序变工况核算方法。根据初始假定的末级流量和现场实际的末级前热力状态和背压,用汽轮机变工况流型判别准则,判别级的流型,然后从末级前参数开始顺序进行一次级的变工况核算,得到新的排汽焓,最后算得机组热耗率和排汽焓。以此方法为变工况计算的基础,并利用系统分析方法,建立了在线确定单元机组最优运行初压的数学模型。为火电机组的优化运行提出了一种新思路。     

供电公司运营效率与影响因素分析

运营效率是衡量企业投资效益和资源配置的核心指标,因此,有效提高运营效率是增强供电公司竞争力的重要途径之一。结合供电公司的实际情况,构建了基于SE-DEA的供电公司运营效率评价模型,借助MATLAB数学分析软件,从投入和产出的角度对8家供电公司的运营效率进行比较,详细地分析了影响其效率的主要因素,并针对问题提出了优化运营的有效措施。实例结果表明,此方法实现了对所有决策单元的充分评价与排序,可以对供电公司运营效率进行有效的评价,为管理者提供科学、有效的信息和决策的依据。     

再生丁基橡胶与非极性不饱和橡胶共混物的性能研究

对再生丁基橡胶(RIIR)与非极性不饱和橡胶共混物的性能进行了研究。结果表明,RIIR易以填料的形式加入到非极性不饱和橡胶中使用,当RIIR以填料的形式加入到NR、BR及SBR中时,不仅使它们的耐热氧老化性及耐屈挠龟裂性得到明显改善,而且使NR及BR的撕裂强度及扯断伸长率提高;RIIR作为生胶与BR及NR共混,可改善BR的耐热氧老化性,提高NR的撕裂强度;SBR与RIIR共混,均使拉伸强度及撕裂强度降低;非极性不饱和二烯类橡胶与RIIR共混后,均使耐磨性降低。     

Simultaneous spectrophotometric determination of copper(II), lead(II) and cadrnium(II)

The full spectrum technique in the fourier domain was studied for simultaneous determination of Cu(II), Pb(II) and Cd(II) with 4-(2-pyridylazo) resorcinol (PAR). A program called SPGRFSQ. was designed to perform the calculations. Seven error functions were calculated for deducing the number of factors. Data reduction was performed using principal component analysis (PCA) algorithm. Experimental results showed the method to be successful even where there was severe overlap of spectra.     

Reprint of “Suppressing propylene carbonate decomposition by coating graphite electrode foil with silver”

A method has been developed to suppress the decomposition of propylene carbonate (PC) by coating graphite electrode foil with a layer of silver. Results from electrochemical impedance measurements show that the Ag-coated graphite electrode presents lower charge transfer resistance and faster diffusion of lithium ions in comparison with the virginal one. Cyclic voltammograms and discharge-charge measurements suggest that the decomposition of propylene carbonate and co-intercalation of solvated lithium ions are prevented, and lithium ions can reversibly intercalate into and deintercalate from the Ag-coated graphite electrode. These results indicate that Ag-coating is a good way to improve the electrochemical performance of graphitic carbon in PC-based electrolyte solutions.     

Experimental study on temperature stress calculation and temperature control optimization of concrete based on early age parameters

Temperature control curve is the key to achieving temperature control and crack prevention of high concrete dam during construction,and its rationality depends on the accurate measurement of temperature stress.With the simulation testing machine for the temperature stress,in the present study,we carried out the deformation process tests of concrete under three temperature curves：convex,straight and concave.Besides,we not only measured the early-age elastic modulus,creep parameters and stress process,but also proposed the preferred type.The results show that at early age,higher temperature always leads to greater elastic modulus and smaller creep.However,the traditional indoor experiments have underestimated the elastic modulus and creep development at early age,which makes the calculated value of temperature stress too small,thus increasing the cracking risk.In this study,the stress values of the three curves calculated based on the strain and early-age parameters are in good agreement with the temperature stress measured by the temperature stress testing machine,which verifies the method accuracy.When the temperature changes along the concave curve,the law of stress development is in consistent with that of strength.Under this condition,the stress fluctuation is small and the crack prevention safety of the concave type is higher,so the concave type is better.The test results provide a reliable basis and support for temperature control curve design and optimization of concrete dams.     

A Performance Evaluation of Classic Convolutional Neural Networks for 2D and 3D Palmprint and Palm Vein Recognition

Palmprint recognition and palm vein recognition are two emerging biometrics technologies. In the past two decades, many traditional methods have been proposed for palmprint recognition and palm vein recognition, and have achieved impressive results. However, the research on deep learning-based palmprint recognition and palm vein recognition is still very preliminary. In this paper, in order to investigate the problem of deep learning based 2D and 3D palmprint recognition and palm vein recognition in-depth, we conduct performance evaluation of seventeen representative and classic convolutional neural networks (CNNs) on one 3D palmprint database, five 2D palmprint databases and two palm vein databases. A lot of experiments have been carried out in the conditions of different network structures, different learning rates, and different numbers of network layers. We have also conducted experiments on both separate data mode and mixed data mode. Experimental results show that these classic CNNs can achieve promising recognition results, and the recognition performance of recently proposed CNNs is better. Particularly, among classic CNNs, one of the recently proposed classic CNNs, i.e., EfficientNet achieves the best recognition accuracy. However, the recognition performance of classic CNNs is still slightly worse than that of some traditional recognition methods.