Angular distribution of REC for Ar on C at 1 MeV/amu

The angular distribution of K-REC for 45.7 and 51.9 MeV Ar⁴⁺ + C has been measured and found to be consistent with sin²θ_lab.     

Low Frequency Pulsed Resonant Converter for Energy Harvesting

A pulsed-resonant ac-dc converter and an integrated circuit (IC) controller have been designed, fabricated, and tested for harvesting energy from low-voltage (1.2V), low-power (1-100muW) energy transducers with output frequency in the 10-Hz-1-kHz range. Simulations using foundry models suggest that the silicon loss could be as low as 0.6muW, and the efficiency could reach 70%. With the IC experimentally packaged, the measured efficiency is between 50% and 70%, depending on the size and the loss in the resonant inductor     

Continuous‐Flow C?H Borylation of Arene Derivatives

A new continuous‐flow system for C H borylation has been developed. An insoluble catalyst prepared from chloro(1,5‐cyclooctadien)iridium(I) dimer and 2,2′‐bipyridine‐4,4′‐dicarboxylic acid in the presence of bis(pinacolato)diboron exhibited high reactivity under continuous‐flow processing without the loss of expensive iridium metal.     

Establishment of a simple method for measurement of chronic blood flow in uterine artery of pregnant cows

Blood flow to the gravid uterine horn of seven multiparous Holstein cows (mean +/- SD, BW = 625.5 +/- 82.4 kg; age = 4.7 +/- 1.7 yr; parity = 2.9 +/- 1.1 yr) was measured from d 225 of gestation to parturition using transit-time ultrasonic blood flow probes placed around the middle uterine artery. Surgery was conducted on d 215 of gestation. The cows were sedated with xylazine and local anesthesia (procaine or bupivacain hydrochloride) during surgery. The surgical operations were conducted at the flank of standing cows. A transit time ultrasonic flow probe ("S" series, diameter 12 or 14 mm, Transonic Systems Inc., Ithaca, NY) was fitted surgically around the uterine artery of each cow. Surgery was completed within 2 h of anesthesia, and the animals recovered rapidly following surgery. Uterine blood flow (UBF, L/min) was recorded at 10-s intervals for 1395 min; these values were averaged to determine UBF. Cows exhibited normal gestation lengths (279.1 +/- 7.4 d), gave birth to normal healthy calves (birth weight = 40.6 +/- 6.6 kg), and had no retained placentas. The UBF increased significantly (P < 0.01) from d 225 (6.67 +/- 2.47) to d 249 (8.23 +/- 2.89) of gestation, but the latter UBF was similar to that of d 266 (8.38 +/- 2.70). The increased UBF after d 225 indicates increased demand of nutrients of fetus with the progress of gestation. The range of mean UBF varied widely among individual cows from 4.1 L/min to 12.2 L/min. Our method is useful for chronic measurement of UBF in cows for nutritional or physiological studies and does not require sophisticated facilities or special surgical technique.     

Incremental learning of gestures for human–robot interaction

For a robot to cohabit with people, it should be able to learn people’s nonverbal social behavior from experience. In this paper, we propose a novel machine learning method for recognizing gestures used in interaction and communication. Our method enables robots to learn gestures incrementally during human–robot interaction in an unsupervised manner. It allows the user to leave the number and types of gestures undefined prior to the learning. The proposed method (HB-SOINN) is based on a self-organizing incremental neural network and the hidden Markov model. We have added an interactive learning mechanism to HB-SOINN to prevent a single cluster from running into a failure as a result of polysemy of being assigned more than one meaning. For example, a sentence: “Keep on going left slowly” has three meanings such as, “Keep on (1)”, “going left (2)”, “slowly (3)”. We experimentally tested the clustering performance of the proposed method against data obtained from measuring gestures using a motion capture device. The results show that the classification performance of HB-SOINN exceeds that of conventional clustering approaches. In addition, we have found that the interactive learning function improves the learning performance of HB-SOINN.     

Capacitance-voltage and leakage-current characteristics of sol-gel-derived crystalline and amorphous SrTa2O6 thin films

SrTa₂O₆ (STA) is a promising high-dielectric-constant (ε) material. In this study, STA thin films were fabricated using the sol-gel method. The capacitance-voltage and leakage-current characteristics of crystalline and amorphous STA thin-film capacitors were investigated. STA thin films crystallized at an annealing temperature of 800 °C. Crystalline STA thin films exhibited a high ε of about 110, whereas amorphous STA thin films showed a much lower ε of about 26-41. However, amorphous STA thin films had a much more constant capacitance as a function of voltage. Of the amorphous thin films, the one annealed at 700 °C had the highest ε of about 41, the lowest leakage current of 10^− 8 A/cm², and a very constant capacitance as a function of voltage with a quadratic voltage-capacitance coefficient (α) of 27 ppm/V². The crystalline STA thin film had a negative α that was independent of frequency, which suggests that dipolar relaxation occurs and is responsible for the large change in the capacitance. The amorphous thin films had a positive α that decreased with increasing frequency, which implies that electrode polarization occurs.     

Metallized ultra-shallow-junction device technology for sub-0.1μm gate MOSFET's

This paper describes a new ultra-thin SOI-CMOS structure offering reduced parasitic diffusion-layer resistance. It addresses ways to deal with the ultra-shallow junctions required by sub-0.1 μm MOSFET's. Based on a CVD tungsten process we experimentally investigate the characteristics of selectively grown tungsten used in the source and drain region made in SOI layers of various thicknesses ranging from 10 to 100 nm. We also investigate certain CMOS device characteristics. The SOI-CMOS structure, with low parasitic diffusion-layer resistance and good contact characteristics for ultra-shallow junction devices exhibits superior device performance and high scalability     

Accelerated weathering-induced degradation of poly(lactic acid) fiber studied by near-infrared (NIR) hyperspectral imaging

Hydrolysis degradation of a set of drawn poly(lactic acid) (PLA) fibers was induced by an accelerated weathering test, radiating ultraviolet (UV) light under a certain temperature and humidity. The fine features of the transient behavior of the PLA fibers were captured by near-infrared (NIR) hyperspectral imaging. The PLA fibers showed a gradual decrease in mechanical property (e.g., tensile strength), indicating hydrolysis degradation. Thus, the detailed analysis of the spectral variation, in turn, offers useful information on the molecular-level degradation behavior of the drawn PLA fibers. The variation of the spectral intensity as well as band position shift of the crystalline band of PLA was analyzed. The spectral intensity of the crystalline band of PLA showed gradual decrease, suggesting the decrease in molecular weight induced by the hydrolysis degradation. In addition, the crystalline band also exhibited a coinciding shift to the lower wavenumber direction with the weathering test, revealing cleavage-induced crystallization of the PLA samples. Consequently, the hydrolysis degradation induced by the weathering test substantially accelerates predominant degradation of the amorphous structure of the PLA and such variation of the molecular structure, in turn, brings less ductility to the PLA fiber.     

Experimental study of perforation and cracking of water-filled aluminum tubes impacted by steel spheres

Water-filled aluminum tubes were subjected to impact by six steel spherical projectiles of different diameters at impact velocities of 40–200 m/s. The effects of the diameter of the steel projectiles and of the material properties of the tubes on cracking and perforation were discussed. Water decreased the wall strength of the aluminum alloy tubes, and the impact velocity at which a steel projectile first passes through the tube wall decreased with increasing diameter of the steel projectile. Using the velocity at which the steel projectile perforates the tube wall, empirical equations of the energies required to perforate the tube wall were derived. Also, the energy balance in the steel projectile during a collision is discussed referring to the pressure history in the filled water and the velocities of the steel projectile before and after collision.     

Recycling of aluminum matrix composites

Separation of matrix metals in composites was tried on alumina short fiber-reinforced aluminum and 6061 alloy composites and SiC whisker-reinforced 6061 alloy composite for recycling. It is possible to separate molten matrix metals from fibers in the composites using fluxes that are used for melt treatment to remove inclusions. About 50 vol pct of the matrix metals was separated from the alumina short fiber-reinforced composites. The separation ratio of the matrix from the SiC whisker-reinforced 6061 alloy composite was low and about 20 vol pct. The separation mechanism was discussed thermodynamically using interface free energies. Since the flux/fiber interface energy is smaller than the aluminum/fiber interface energy, the replacement of aluminum with fluxes in composites takes place easily. Gases released by the decomposition of fluxes act an important role in pushing out the molten matrix metal from the composite. The role was confirmed by the great amount cavity formed in the composite after the matrix metal flowed out.