Lung phosphatidylcholine and fasting in male and female rats

Lung from male and female rats fasted for 4 days were used. Phospholipid, phosphatidylcholine and its molecular species were analyzed in lungs from these rats and effects of fasting upon the biosynthesis of phosphatidylcholine in lungs from both sexes were determined using radioactive choline. The molecular species of phosphatidylcholine in both male and female rats did not differ with fasting except the monoenoic species. Incorporation of choline into phosphatidylcholine in both male and female rats significantly increased after fasting, but distribution of radioactivity in phosphatidylcholine yielded similar values in each group. These results suggest that the decrease of saturated phosphatidylcholine content after fasting may be not due to specific change in saturated phosphatidylcholine.     

Effect of dispersed oxides of rare earths and other reactive elements on the high temperature oxidation resistance of Fe-20Cr alloy

The isothermal oxidation resistance in air at 1273, 1323, and 1373 K of Fe-20Cr alloys with 1 wt pct dispersoid of Y₂0₃, La₂O₃, A1₂O₃, TiO₂, SiO₂, Cr₂O₃ and without dispersoid prepared by a conventional sintering and rolling procedures was examined. It was found that SiO₂ dispersoid reduced, while A1₂O₃ dispersoid slightly increased the oxidation resistance. The dispersoids of TiO₂ and Cr₂O₃ showed no beneficial effect on the oxidation resistance except for the oxidation after 10 h at 1373 K. The oxidation behavior after 10 h at 1373 K was rather complex including accelerated oxidation. The beneficial effect of La₂O₃ and Y₂O₃ dispersoids was excellent at all temperatures. The oxidation rates during the early stage of oxidation for the alloys with dispersoid were apparently dependent on the type of the dispersoid. There was no evidence that dispersoid accumulated at the scale-alloy interface. Comparison of results obtained for the oxidation of the alloys prepared by a powder metallurgical procedure with results for the alloys by arc-melting procedure indicated that the grain size of the alloy is an important factor for reduction of oxidation rate but does not seem to be critical, because the grain size of the alloys with dispersoid was not dependent on the type of the dispersoid. Ion Microanalyses of the Cr₂O₃ scale formed after 1 h oxidation at 1373 K showed an interesting feature in that all the dispersed elements were incorporated in the scale and the iron content of the scale was lower on the alloys which exhibited better oxidation resistance.     

Grazing exit electron probe microanalysis of submicrometer inclusions in metallic materials

Grazing exit electron probe microanalysis (GE-EPMA) is a new method of EPMA in which characteristic X-rays emitted from only near-surface regions of a specimen are detected at extremely low exit angles near 0 degrees (the grazing exit condition). This technique requires the analytical objects exist on a flat surface. Therefore, the GE-EPMA analysis has been used only for the analysis of particles or a thin film on a flat substrate so that there were only few applications for practical analysis. As a new application, we have carried out GE-EPMA analysis of approximately 0.2-microm inclusions on stainless steel, which appeared to be a projection on the specimen surface with chemical etching. The GE-EPMA quantitative results were in excellent agreement with those of inclusions that were extracted from the stainless steel and analyzed by EPMA with conventional exit condition (30 degrees). This method could be, therefore, applied to the analysis of the submicrometer inclusion in a wide variety of metallic materials if the inclusion appears to be a projection with chemical etching treatment.     

Ice clouds and Asian dust studied with lidar measurements of particle extinction-to-backscatter ratio, particle depolarization, and water-vapor mixing ratio over Tsukuba

The tropospheric particle extinction-to-backscatter ratio, the depolarization ratio, and the water-vapor mixing ratio were measured by use of a Raman lidar and a polarization lidar during the Asian dust seasons in 2001 and 2002 in Tsukuba, Japan. The apparent (not corrected for multiple-scattering effects) extinction-to-backscatter ratios (Sp) showed a dependence on the relative humidity with respect to ice (RHice) obtained from the lidar-derived water-vapor mixing ratio and radiosonde-derived temperature; they were mostly higher than 30 sr in dry air (RHice < 50%), whereas they were mostly lower than 30 sr in ice-supersaturated air (RHice > or = 100%), where the apparent extinction coefficients were larger than 0.036 km(-1). Both regions showed mean particle depolarization ratios of 20%-22%. Comparisons with theoretical calculations and the previous experiments suggest that the observed dependence of Sp on RHice is attributed to the difference in the predominant particles: nonspherical aerosols (mainly the Asian dust) in dry air and cloud particles in ice-supersaturated air.     

Effect of heating temperature on dielectric properties of Pb(Zr,Ti)O3 [PZT] fibers

Ferroelectric Pb(Zr_0.53Ti_0.47)O₃ fibers were reproducibly fabricated by sol-gel technique using triethanolamine (TEA) complexed alkoxide. The phase transition from pyrochlore to perovskite took place about 400°C and a stable single perovskite phase was obtained at 550°C. PZT gel fibers spun through nozzle were heat-treated at 700°C, and at 1000°C for 1 h to certify the effect of heat-treatment temperature on the electrical properties. The PZT fibers had elliptical cross sections with diameter of 72 m–92 m, and dense microstructure was obtained by heating at 1000°C. In the PZT fibers heat-treated at 1000°C, a distinguishable relative permittivity peak and a pyroelectric current peak were observed at their Curie temperature. The P-E hysteresis loops of the crystalline PZT fibers were also observed.     

Stress intensity factor analysis of a three-dimensional interface crack between dissimilar anisotropic materials

A new numerical method to calculate the stress intensity factors (SIFs) of a three-dimensional interface crack between dissimilar anisotropic materials was developed. In this study, the M-integral method was employed for mode separation of the SIFs. The moving least-square method was utilized to calculate the M-integral. Using the M-integral with the moving least-square method, SIFs can be automatically calculated with only the nodal displacements from the finite element method (FEM). Here, SIFs analyses of some typical three-dimensional problems are demonstrated. Excellent agreement was achieved between the numerical results obtained by the present method and the corresponding results proposed by other researchers. In addition, the SIFs of a single-edge crack, a through crack, and a semi-circular crack between two anisotropic solids in three-dimensional structures were analyzed.     

BAAQ: an infrastructure for application integration and knowledge discovery in bioinformatics.

The emerging grid computing technologies enable bioinformatics scientists to conduct their researches in a virtual laboratory, in which they share public databases, computational tools as well as their analysis workflows. However, the development of grid applications is still a nightmare for general bioinformatics scientists, due to the lack of grid programming environments, standards and high-level services. Here, we present a system, which we named Bioinformatics: Ask Any Questions (BAAQ), to automate this development procedure as much as possible. BAAQ allows scientists to store and manage remote biological data and programs, to build analysis workflows that integrate these resources seamlessly, and to discover knowledge from available resources. This paper addresses two issues in building grid applications in bioinformatics: how to smoothly compose an analysis workflow using heterogeneous resources and how to efficiently discover and re-use available resources in the grid community. Correspondingly an intelligent grid programming environment and an active solution recommendation service are proposed. Finally, we present a case study applying BAAQ to a bioinformatics problem.     

Positioning device for outdoor mobile robots using optical sensors and lasers

We propose a novel method for positioning a mobile robot in an outdoor environment using lasers and optical sensors. Position estimation via a noncontact optical method is useful because the information from the wheel odometer and the global positioning system in a mobile robot is unreliable in some situations. Contact optical sensors such as computer mouse are designed to be in contact with a surface and do not function well in strong ambient light conditions. To mitigate the challenges of an outdoor environment, we developed an optical device with a bandpass filter and a pipe to restrict solar light and to detect translation. The use of two devices enables sensing of the mobile robot’s position, including posture. Furthermore, employing a collimated laser beam allows measurements against a surface to be invariable with the distance to the surface. In this paper, we describe motion estimation, device configurations, and several tests for performance evaluation. We also present the experimental positioning results from a vehicle equipped with our optical device on an outdoor path. Finally, we discuss an improvement in postural accuracy by combining an optical device with precise gyroscopes.     

Interannual variations in vegetation activities and climate variability caused by ENSO in tropical rainforests

Interannual variations in terrestrial carbon cycle over tropical rainforests affect the global carbon cycle. Terrestrial ecosystem models show the interannual relationship between climate changes due to El Niño‐Southern Oscillation (ENSO) and net primary production over tropical rainforests. However, we need an independent analysis using satellite‐based vegetation index and climate parameters. In the present study, we extracted the ENSO‐related interannual variations from time‐series in Normalized Difference Vegetation Index (NDVI) and climate data from 1981 to 2000, and analysed their relevance. We detected relationships among NDVI, ENSO, and climate parameters from long‐term data with negative NDVI–ENSO, NDVI–temperature, and positive NDVI–precipitation relations. These correlations suggest that interannual variability in vegetation activities over tropical rainforests could be extracted from NDVI time‐series despite noise components in NDVI data, and that interannual changes in precipitation and temperature caused by ENSO play a more important role in vegetation activities over tropical rainforests than in incoming surface solar radiation.     

Capillary rise properties of porous mullite ceramics prepared by an extrusion method with various diameters of fiber pore formers

Porous mullite ceramics with unidirectionally oriented pores were prepared by an extrusion method using rayon fibers as the pore formers. Rayon fibers of 8.1, 9.6, 16.8, and 37.6 μm in diameter were used as the pore formers and were kneaded with alumina powder, kaolin clay, China earthen clay, and water to form pastes. These pastes were extruded into cylindrical tubes, dried, and fired at 1500 °C for 4 h. The apparent porosities ranged from 45.7 to 48.2 %. The pore size distributions showed a sharp peak at 9.4, 10.0, 15.6, and 30 μm with increasing fiber diameters. The height of the capillary rise was 1780, 1670, 1320, and 950 mm with increasing fiber diameter. The maximum capillary rise is much higher than previously reported. The contact angle and effective pore radius that determine the capillary rise ability were calculated by fitting the capillary rise curves using the Fries and Dreyer’s equation.