An Attractant of the Aphidophagous Gall Midge <Emphasis Type="Italic">Aphidoletes aphidimyza</Emphasis> From Honeydew of <Emphasis Type="Italic">Aphis gossypii</Emphasis>

Many natural enemies of insects use honeydew as a volatile cue to locate hosts or prey, as an oviposition stimulant, and as an arrestant for foraging. The aphidophagous gall midge Aphidoletes aphidimyza (Rondani) (Diptera: Cecidomyiidae) has predacious larval stages and can be used to control aphid populations, especially in greenhouses. Previous studies have shown that the honeydew, excreted by the aphid Myzus persicae, attracts A. aphidimyza, but the crucial attractants have not been identified. Using an olfactometer, we studied behavioral responses of female A. aphidimyza to volatiles emitted from honeydew excreted by the aphid Aphis gossypii on eggplants. The volatiles attracted female midges and induced oviposition. Moreover, using gas chromatography coupled with mass spectrometry (GC/MS), we identified phenylacetaldehyde as the attractant compound in the honeydew, although it did not induce oviposition in olfactometer experiments.     

Biomimetic Zirconia with Cactus-Inspired Meso-Scale Spikes and Nano-Trabeculae for Enhanced Bone Integration

Biomimetic design provides novel opportunities for enhancing and functionalizing biomaterials. Here we created a zirconia surface with cactus-inspired meso-scale spikes and bone-inspired nano-scale trabecular architecture and examined its biological activity in bone generation and integration. Crisscrossing laser etching successfully engraved 60 μm wide, cactus-inspired spikes on yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) with 200–300 nm trabecular bone-inspired interwoven structures on the entire surface. The height of the spikes was varied from 20 to 80 μm for optimization. Average roughness (Sa) increased from 0.10 μm (polished smooth surface) to 18.14 μm (80 μm-high spikes), while the surface area increased by up to 4.43 times. The measured dimensions of the spikes almost perfectly correlated with their estimated dimensions (R² = 0.998). The dimensional error of forming the architecture was 1% as a coefficient of variation. Bone marrow-derived osteoblasts were cultured on a polished surface and on meso- and nano-scale hybrid textured surfaces with different spike heights. The osteoblastic differentiation was significantly promoted on the hybrid-textured surfaces compared with the polished surface, and among them the hybrid-textured surface with 40 μm-high spikes showed unparalleled performance. In vivo bone-implant integration also peaked when the hybrid-textured surface had 40 μm-high spikes. The relationships between the spike height and measures of osteoblast differentiation and the strength of bone and implant integration were non-linear. The controllable creation of meso- and nano-scale hybrid biomimetic surfaces established in this study may provide a novel technological platform and design strategy for future development of biomaterial surfaces to improve bone integration and regeneration.     

Simulation of mesophase formation of rodlike molecule,imogolite

Summary The process of mesophase formation of rodlike molecule, imogolite, was simulated by comparing the distance distribution function computed from models with that obtained by the Fourier-transformation of small angle X-ray scattering data. In the initial state below A-point (defined as a starting point of mesophase formation), imogolite molecules assemble into loosely packed hexagonal shape with their ends aligned in a line. The columns composed of hexagonal packing are arrnaged side by side to form raft-like sheets near the A-point and finally form mesophase above A-point.     

Controlled radical polymerization with polyolefin macroinitiator: a convenient and versatile approach to polyolefin-based block and graft copolymers

This paper introduces the new synthetic methodology of polyolefin-based block and graft copolymers with polar segments [e.g., polystyrene and poly(meth)acrylates]. Various brominated polyolefins were prepared by bromination of polyolefins with N-bromosuccinimide. The resulting brominated polyolefins were able to initiate the controlled radical polymerization of polar monomers, such as methyl methacrylate, ethyl acrylate, t-butyl acrylate, styrene and 2-(dimethylamino)ethyl acrylate, using a CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine catalyst system, leading to a variety of polyolefin-based copolymers with a different content of the corresponding polar segment. Because of the accessible synthesis of polyolefin macroinitiators, this synthetic methodology is expected to result in the preparation of a wide range of polyolefin-based block and graft copolymers.     

Novel system of electro-catalysts for methanol oxidation based on platinum and organic metal complexes

Novel system of electro-catalysts was developed for methanol oxidation reaction (MOR) in direct methanol fuel cells. Mixture of platinum tetraammine complex with cobalt quinolyldiamine complex with various mixing ratio was supported on graphite powder, and heat treated at 400-1000 °C in argon atmosphere. Powder thus obtained was put on a graphite disk electrode, and tested for electrochemical MOR in acid media. Although the cobalt complex itself showed almost no catalytic ability for MOR, it enhanced the activity of Pt more than several 10-fold when it was mixed with Pt. MOR performance was best exploited at about equal mixing ratio of platinum and cobalt complexes. Compared with platinum-ruthenium alloy catalysts, the new catalysts exhibited promising catalytic ability. The present investigation revealed good potentiality of organic complex catalysts in combination with metal catalysts for MOR, which opens the way to synthesize and develop a new class of electro-catalysts of low cost through wide range of molecular designing.     

Porous poly(L‐lactic acid)/poly(ethylene glycol) blend films

Poly(L ‐lactic acid) (PLLA: M_w = 19.4 × 10⁴)/poly(ethylene glycol) (PEG: M_w = 400) blend films were formed by use of a solvent‐cast technique. The properties and structures of these blend films were investigated. The Young's modulus of the PLLA decreased from 1220 to 417 MPa with the addition of PEG 5 wt %, but the elongation at break increased from 19 to 126%. The melting point of PLLA linearly decreased with increases in the PEG content (i.e., pure PLLA: 172.5°C, PLLA/PEG = 60/40 wt %: 159.6°C). The PEG 20 wt % blend film had a porous structure. The pore diameter was 3–5 μm. The alkali hydrolysis rate of this blend film was accelerated due to its porous structure. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 965–970, 2004     

Advantage of Sodium Polyoxyethylene Lauryl Ether Carboxylate as a Mild Cleansing Agent

Five anionic surfactants widely used in commercial skin cleansers were studied: sodium polyoxyethylene lauryl ether carboxylate (EC), sodium polyoxyethylene alkyl ether sulfate (ES), sodium dodecyl sulfate, potassium laurate, and N-cocoyl-l-glutamic acid monosodium salt. The amount of surfactant from aqueous solution adsorbed into the stratum corneum (SC), the degree of SC swelling, the change of the secondary structure of SC proteins (denaturation). The surface tension of surfactant–zein mixed solutions, and the solubilization behavior of zein were measured. Results showed that EC had the lowest adsorption into SC, the lowest SC swelling, and lowest denaturation of SC proteins. Low interactions between surfactants and SC proteins were also observed for EC/ES mixture solutions as well as. Mixing EC with ES good foaming performance. The EC/ES mixture, at about 1:1 ratio, is an excellent surfactant system for skin cleanser applications having cleansing characteristics and mildness to the skin.     

Present status and future prospects of spherical aberration corrected TEM/STEM for study of nanomaterials?

The present status of Cs-corrected TEM/STEM is described from the viewpoint of the observation of nanomaterials. Characteristic features in TEM and STEM are explained using the experimental data obtained by our group and other research groups. Cs correction up to the 3rd-order aberration of an objective lens has already been established and research interest is focused on correcting the 5th-order spherical aberration and the chromatic aberration in combination with the development of a monochromator below an electron gun for smaller point-to-point resolution in optics. Another fundamental area of interest is the limitation of TEM and STEM resolution from the viewpoint of the scattering of electrons in crystals. The minimum size of the exit-wave function below samples undergoing TEM imaging is determined from the calculation of scattering around related atomic columns in the crystals. STEM does not have this limitation because the resolution is, in principle, determined by the probe size. One of the future prospects of Cs-corrected TEM/STEM is the possibility of extending the space around the sample holder by correcting the chromatic and spherical aberrations. This wider space will contribute to the ease of performing in situ experiments and various combinations of TEM and other analysis methods. High-resolution, in situ dynamic and 3D observations/analysis are the most important keywords in the next decade of high-resolution electron microscopy.     

Japan and the United States: Cooperation vs. competition in high-technology

Japan and the United States share many similar objectives in high-technology. The cooperation between the two countries has spread widely. However, the high-technology area, which is a high growth and most promising sector, has been marked by intensive commercial competition sometimes leading to excessive anxiety and unnecessary confrontation.     

Health-monitoring technologies for alumina-fiber-reinforced plastics

Transmitted light could detect matrix cracks that occurred in the early stages of fracture of alumina-fiber-reinforced plastics (alumina-FRPs); these cracks could not be detected by acoustic emission (AE). An optical-fiber Bragg grating (FBG) sensor could detect the matrix cracks but it must be embedded in the FRPs. To determine which wavelength is sensitive to the defects in the FRP, the spectra of the transmitted and reflected light were measured. The intensity of the transmitted light, especially in the visible region (wavelength: 400–800 nm), decreased as the bending stiffness of the test piece decreased. It is thus concluded that to monitor the decrease in bending stiffness of FRPs, a simple sensor using a visible ray is good enough. And this transmitted-light NDE technique can work in the strong electromagentic field associated with a superconductor. It will therefore be useful for detecting defects in the FRP of the load-support system in service.