用多媒体软件模拟匀加速直线运动

用多媒体软件Ｄｉｒｅｃｔｏｒ６．０来模拟物理教学中的匀加速直线运动。     

Hybrid Well-balanced WENO Schemes with Different Indicators for Shallow Water Equations

In (J. Comput. Phys. 229: 8105–8129, 2010), Li and Qiu investigated the hybrid weighted essentially non-oscillatory (WENO) schemes with different indicators for Euler equations of gas dynamics. In this continuation paper, we extend the method to solve the one- and two-dimensional shallow water equations with source term due to the non-flat bottom topography, with a goal of obtaining the same advantages of the schemes for the Euler equations, such as the saving computational cost, essentially non-oscillatory property for general solution with discontinuities, and the sharp shock transition. Extensive simulations in one- and two-dimensions are provided to illustrate the behavior of this procedure.     

Blockwise conjugate gradient methods for image reconstruction in volumetric CT

Cone beam computed tomography (CBCT) enables volumetric image reconstruction from 2D projection data and plays an important role in image guided radiation therapy (IGRT). Filtered back projection is still the most frequently used algorithm in applications. The algorithm discretizes the scanning process (forward projection) into a system of linear equations, which must then be solved to recover images from measured projection data. The conjugate gradients (CG) algorithm and its variants can be used to solve (possibly regularized) linear systems of equations Ax=b and linear least squares problems minx∥b-Ax∥(2), especially when the matrix A is very large and sparse. Their applications can be found in a general CT context, but in tomography problems (e.g. CBCT reconstruction) they have not widely been used. Hence, CBCT reconstruction using the CG-type algorithm LSQR was implemented and studied in this paper. In CBCT reconstruction, the main computational challenge is that the matrix A usually is very large, and storing it in full requires an amount of memory well beyond the reach of commodity computers. Because of these memory capacity constraints, only a small fraction of the weighting matrix A is typically used, leading to a poor reconstruction. In this paper, to overcome this difficulty, the matrix A is partitioned and stored blockwise, and blockwise matrix-vector multiplications are implemented within LSQR. This implementation allows us to use the full weighting matrix A for CBCT reconstruction without further enhancing computer standards. Tikhonov regularization can also be implemented in this fashion, and can produce significant improvement in the reconstructed images.     

用流延法制备优质陶瓷基片的研究

本文概括了流延成型工艺的现状，介绍了有机基流延成型工艺中溶剂及添加剂的作用和选择原则，同时介绍了几种新的流延成型工艺。     

Phase formation and modification of corrosion property of nitrogen implanted Ti-Al-V alloy

In the present investigation, polished samples were implanted with nitrogen ion at an energy of 60 keV and implantation doses were 1×10¹⁶, 5×10¹⁶, 1×10¹⁷ and 6×10¹⁷ ions/cm². Glancing incidence X-ray diffraction was employed on the implanted specimens to understand the phases formed with increasing dose. The valence states of nitrogen, titanium and carbon on the sample surfaces were analyzed by X-ray photoemission spectroscopy. The corrosion resistance was examined by the electrochemical methods in a solution with pH=10 at room temperature in order to determine the optimum dose that can give good corrosion resistance in a simulated nuclear reactor condition. Scanning electron microscopy was used to observe the topographies of nitrogen-implanted Ti-Al-Zr after potentiodynamic measurement. It was found that implanted nitrogen dissolved in titanium matrix with increasing dose and the resultant nitrides such as TiN and Ti₂N precipitated. Implantation of nitrogen ions into the surface of Ti-Al-V alloy improves its corrosion resistance, and the increase of the corrosion resistance depends on the nitrogen dose employed; the maximum improvement of the corrosion resistance was observed at a dose of 1×10¹⁷ N⁺/cm².     

榴弹弹丸质点弹道性能分析与可视化仿真

为提高榴弹设计中的计算分析精度，加快弹种的研发速度，建立了一个弹丸质点弹道模型提出了相应的算法和软件实现；本软件除具有同类软件的计算功能外，还以可视化的形式模拟弹丸在空中的飞行全过程，并生成各种特性曲线，同时具有智能捕捉功能、查询功能。     

Applications of optimal mathematic-physical models in metallurgical manufacture scheduling system at Baosteel

The transfer of mass flow between ironmaking and steelmaking process at Baoshan Iron and Steel Co. Ltd. has been analyzed. The mathematic-physical models of transport scheduling for hot metal manufacturing have been researched combined with the practical problem in the metallurgical manufacture procedure. Taking into account these models, the scheduling software has been designed, programmed and tested on-line. The new automation system of production scheduling has been implemented successfully at Baosteel, which produces a great economic benefit.     

基于AT89C2051的有线电视可寻址控制系统

介绍了用AT89C2 0 5 1实现有线电视可寻址控制系统的原理 ,软件流程及硬件电路     

校园网络与防火墙建设

简要介绍了防火墙在校园网络建设中的重要作用,简介了防火墙的种类、工作原理,并对几种防火墙的优缺点进行总结。