Evaluation of activity,selectivity and stability of catalysts for naphtha reforming

A method to evaluate naphtha-reforming catalysts has been developed and the equipment and its operation is described here in detail. The octane number computed by chromatographic analysis is similar to the one derived using the motor method and is proportional to the total aromatic concentration. The aromatic concentration is a quick and easy method to evaluate catalyst activity. The liquid yield and selectivity were also measured chromatographically. The efficiencies of commercial and prepared catalysts were compared by plotting octane number vs liquid yield. The catalysts were Pt/Al₃O₃-Cl and the process variables were similar to those used in industry. The feed was n-heptane or C₆-C₈ naphtha. Accelerated deactivation tests at lower pressure and hydrogen : hydrocarbon ratios were performed to study stability in shorter times.     

Pectin from low quality ‘Golden Delicious’ apples: Composition and gelling capability

Pectin was acid-extracted from low quality ‘Golden Delicious’ apple fruit, yielding 16% (w pectin/w apple fruit). Composition and some of its physicochemical and functional properties were assessed. The pectin fraction presented a galacturonic acid content of 65% (w/w), an esterification degree of 57%, an intrinsic viscosity, [η], of 307 ml/g and a molecular weight (Mw) of 112 kDa. Pectin gels were obtained in 60% (w/v) fructose and pH 2.7. Pectin gels at 2.0% and 3.0% (w/v) presented hardness values of 10.2 and 20.4 g after 12 h at 4 °C. The gel hardness was greatly affected by aging (20% and 25% decrease in 48 h for gels at 2% and 3%, respectively). The results attained suggest the use of this gum as a potential texturing agent for the food industry.     

Invited review: Reproducible research from noisy data: Revisiting key statistical principles for the animal sciences

Reproducible results define the very core of scientific integrity in modern research. Yet, legitimate concerns have been raised about the reproducibility of research findings, with important implications for the advancement of science and for public support. With statistical practice increasingly becoming an essential component of research efforts across the sciences, this review article highlights the compelling role of statistics in ensuring that research findings in the animal sciences are reproducible—in other words, able to withstand close interrogation and independent validation. Statistics set a formal framework and a practical toolbox that, when properly implemented, can recover signal from noisy data. Yet, misconceptions and misuse of statistics are recognized as top contributing factors to the reproducibility crisis. In this article, we revisit foundational statistical concepts relevant to reproducible research in the context of the animal sciences, raise awareness on common statistical misuse undermining it, and outline recommendations for statistical practice. Specifically, we emphasize a keen understanding of the data generation process throughout the research endeavor, from thoughtful experimental design and randomization, through rigorous data analysis and inference, to careful wording in communicating research results to peer scientists and society in general. We provide a detailed discussion of core concepts in experimental design, including data architecture, experimental replication, and subsampling, and elaborate on practical implications for proper elicitation of the scope of reach of research findings. For data analysis, we emphasize proper implementation of mixed models, in terms of both distributional assumptions and specification of fixed and random effects to explicitly recognize multilevel data architecture. This is critical to ensure that experimental error for treatments of interest is properly recognized and inference is correctly calibrated. Inferential misinterpretations associated with use of P-values, both significant and not, are clarified, and problems associated with error inflation due to multiple comparisons and selective reporting are illustrated. Overall, we advocate for a responsible practice of statistics in the animal sciences, with an emphasis on continuing quantitative education and interdisciplinary collaboration between animal scientists and statisticians to maximize reproducibility of research findings.     

Multiplex real-time PCR for the detection and quantification of DNA from duck, goose, chicken, turkey and pork

Meat products made from liver of poultry like duck and goose are popular and often sold as specialities for high prices. As the prices for the basic raw material are high, fraud may be attractive for producers. To prevent consumers from fraud, official control authorities survey such products. In this work, a quantitative multiplex PCR was developed determining the proportion of DNA and meat fractions of turkey, chicken, duck, goose and pork. The precision and accuracy of the PCR system was investigated. To examine the possibility of determining the meat fractions according to the recipe, reference material was produced and different liver–meat products from the market were analysed. For major components, the measurement uncertainty revealed to be at 39 %. For minor components, it was estimated to be 124 %. The results showed that this pentaplex real-time-PCR system is suitable to control the meat properties of such products although measurement uncertainty may be high.     

Flexible power generation scenarios for biogas plants operated in Germany: impacts on economic viability and GHG emissions

Biogas plants enable power to be generated in a flexible way so that variable, renewable energy sources can be integrated into the energy system. In Germany, the Renewable Energy Sources Act promotes flexible power generation in biogas plants. Two existing biogas plants in flexible operation were analyzed with respect to economic viability and greenhouse gas (GHG) emissions to assess the feasibility of flexible operation. To do this, a biogas technology simulation model was developed to reproduce the technical design of both biogas plants and to link this design with twelve flexibilization scenarios. The evaluation of the economic viability is based on a discounting method of investment appraisal. For assessing the level of GHG emissions, the life cycle assessment method has been applied. The results show that the profitability of flexibilization is contingent upon premium payments promoting flexibility and direct sales resulting from a higher electrical efficiency of new or additionally installed combined heat and power units. Overall, with respect to profitability, the results of the flexible power generation scenarios are dependent upon the properties of the technical plant, such as its power generation and gas storage capacities. Relative GHG emissions from flexible biogas plants show significantly lower values than for referenced fossil gas–steam power stations. Among the various scenarios, the results reveal that the level of GHG emissions especially depends on the number of operating hours of the additional combined heat and power unit(s). The results of the analyzed biogas plants showed no direct correlation between GHG emissions and the economic benefits. Overall, a flexible power generation of biogas plants may improve the economic viability as well as result in lower GHG emissions in comparison with a conventional base load operation. © 2016 The Authors. International Journal of Energy Research published by John Wiley & Sons Ltd.     

The effect of surface silanol groups on the deposition of apatite onto silica surfaces: a computer simulation study

Computer modelling techniques were employed to investigate the effect of surface silanol groups on the strength of adhesion of apatite thin films to silica surfaces. To this end, we have studied a series of silica surfaces with different silanol densities and calculated their interaction with apatite thin films. Our findings indicate that apatite does not attach strongly to surface hydroxy groups, but that apatite should deposit at dehydrated silica surfaces, especially when the surface silicon and oxygen species rearrange to form O–Si–O links. Any dangling silicon and oxygen bonds at the silica surfaces are saturated by coordination to oxygen and calcium atoms in the apatite layer, but the extra reactivity afforded by these under-coordinated surface species does not necessarily lead to more favourable substrate/film interactions. The lowest energy silica/apatite interfaces are those where an undistorted apatite layer can be deposited on a regular, stable substrate surface. Our simulations support the suggestion, that in vivo surface hydroxy groups are first condensed to form O–Si–O bridges before deposition and growth of apatite.     

Comparative study between two different sources of n-3 poliunsaturated fatty acids and it effect on thymus and lipid profile in rats

In the present paper we analyzed the effect caused by different recovery diets enriched with n-3 polyunsaturated fatty acids (PUFA n-3) on thymus and serum lipid pattern. Severe depleted weanling Wistar rats (D) were divided in three groups that received during 10 days a 20% casein diet supplemented with EPA+DHA (group Cas), a 20% protein milk diet prepared using a commercial reduced-fat product enriched with linolenic and linoleic acids (group L) and a 20% casein diet as control group C. Cas and L gave each other 24 mg/day of PUFA n-3 being the ratio n-6/n-3 8.1/1 and 7.6/1, respectively. Thymus was removed and weighted and cell number were determined; blood was recollected and Total cholesterol, triacylglycerol, HDL and LDL-cholesterol fractions and myristic, palmitic, stearic, oleic, linoleic, linolenic, araquidonic, EPA and DHA fatty acid concentrations were measured in serum. Statistical analysis was performed using Anova test. Cell number were higher (p<0.01) in Cas (44.48+/-8.20) and in L (56.45+/-14.72) when compared to group D (1.80+/-0.70) and group C (23.70+/-4.04). L presented lower values of cholesterol, HDL and LDL-cholesterol (p<0.01) and higher values of triacylglycerol (p<0.05) when compared to Cas, being EPA (p<0.05) and DHA (p<0.01) higher in Cas. Being PUFA n-3 contribution the same in Cas and L, both diets were able to reverse the thymic athropy presenting a different hipolipemic behavior due to the different sources of PUFA n-3 used in the diets.