Photoinduced Magnetization with a High Curie Temperature and a Large Coercive Field in a Co‐W Bimetallic Assembly

The crystal structure, magnetic properties, and temperature‐ and photoinduced phase transition of [{Co^II(4‐methylpyridine)(pyrimidine)}₂{Co^II(H₂O)₂}{W^V(CN)₈}₂]·4H₂O are described. In this compound, a temperature‐induced phase transition from the Co^II (S = 3/2)‐NC‐W^V(S = 1/2) [high‐temperature (HT)] phase to the Co^III(S = 0)‐NC‐W^IV(S = 0) [low temperature (LT)] phase is observed due to a charge‐transfer‐induced spin transition. When the LT phase is irradiated with 785 nm light, ferromagnetism with a high Curie temperature (T_C) of 48 K and a gigantic magnetic coercive field (H_c) of 27 000 Oe are observed. These T_C and H_c values are the highest in photoinduced magnetization systems. The LT phase is optically converted to the photoinduced phase, which has a similar valence state as the HT phase due to the optically induced charge‐transfer‐induced spin transition.     

Application of a Two-Dimensional Computer Simulation to Cake Growth in Slip Casting with Complicated-Shape Gypsum Molds

A two-dimensional computer simulation method, developed by the authors using the method of finite differences, was applied to estimate the cake growth in slip casting of alumina with a triangular gypsum mold and a box-type gypsum mold with a convex bottom. The cake growth patterns, water penetration patterns, water flow rate distributions, and pressure distributions were simulated in the molds and/or cakes. The simulated cake growth patterns were in good agreement with those observed experimentally in both molds. Moreover, the cake growths could be well understood from the results of the water flow rate distributions in each case. The present method is applicable to cake growth simulation in slip casting with complicated-shape gypsum molds.     

Rubber‐toughened polyamide‐6 with a low thermal expansion coefficient: effect of preferential distribution of rubber and inorganic filler

The effects of morphological changes on the thermal expansion, toughness and heat resistance of polyamide‐6 (PA)/styrene–ethylene–butylene–styrene (SEBS)/polyphenylene ether (PPE) blends were investigated. Compared with the typical ‘sea (PA matrix)–island (PPE domain)–lake (SEBS in PPE domain)’ morphology, an injection‐molded ternary blend with a preferential distribution of SEBS component at the interface between PA and PPE exhibited a low coefficient of linear thermal expansion (CLTE) in the flow direction. This low CLTE was ascribed to the deformation of SEBS and PA into a co‐continuous microlayer network structure during injection molding. Consequently, the expansion preferentially occurred towards the thickness direction. Further CLTE reduction either by a change in PA viscosity or by the selective location of an inorganic filler was examined, and its influences on impact strength and heat resistance are discussed based on transmission electron microscopy observations. © 2015 Society of Chemical Industry     

The validity of new memory complaints in the elderly

OBJECTIVE: To determine the validity of new subjective memory complaints (MCs) from individuals who previously, when without dementia, denied having MCs. DESIGN: Prospective cohort. SETTING: Longitudinal, community-based study of aging and dementia. PATIENTS: One hundred thirty-three community-dwelling elderly individuals who were part of a registry for the study of conditions related to aging in North Manhattan, NY. Patients were selected if they were initially without dementia and had completed at least 2 successive annual clinical and neuropsychological evaluations and provided their own medical history. MAIN OUTCOME MEASURES: Performance on memory tests--the Buschke Selective Reminding Test and a visual memory task--and global performance on a neuropsychological test battery and clinical evaluation, by which questionable dementia or dementia was diagnosed according to a well-defined paradigm. RESULTS: Fifty-three subjects with MCs at the initial evaluation performed no worse on the memory test than the 80 subjects who denied MCs initially. There was a weak association between MCs and the diagnosis of questionable dementia at baseline (P = .04), but this was nonsignificant after adjusting for age and education. At 1-year follow-up, 21 of the 80 without baseline MCs now reported MCs. At the follow-up evaluation, these 21 subjects performed significantly worse on the memory tests, were 5 times more likely to have significant cognitive impairment, and had shown significantly greater decline over the preceding year on several of the cognitive measures than the 59 who continued to deny MCs. CONCLUSION: New MCs from individuals, who when without dementia recently denied MCs, may suggest the presence of significant impairment of memory or cognition.     

0.5-μm 3.3-V BiCMOS standard cells with 32-kilobyte cache andten-port register file

BiCMOS standard cell macros, including a 0.5-W 3-ns register file, a 0.6-W 5-ns 32-kbyte cache, a 0.2-W 3-ns table look-aside buffer (TLB), and a 0.1-W 3-ns adder, are designed with a 0.5-μm BiCMOS technology. A supply voltage of 3.3 V is used to achieve low power consumption. Several BiCMOS/CMOS circuits, such as a self-aligned threshold inverter (SATI) sense amplifier and an ECL HIT logic are used to realize high-speed operation at the low supply voltage. The performance of the BiCMOS macros is verified using a fabricated test chip     

Estimation of forest area near deserts — production of Global Bio-Methanol from solar energy

This paper proposes a new synthesis method for methanol as a future alternative fuel, by the combination of carbon supplied from wood and hydrogen supplied from the electrolysis of water using a solar power generation system in the desert. In the developed countries, more than half of the potential forest area has already been converted into other land uses, while existing forests are well organized and available for wood production. In the developing countries, potential forest sites are expected to be available for wood production, even though they are presently grasslands or secondary forests, while natural tropical forests will not be allowed to be converted into artificial forests. The area available for plantations within 500 km distant from deserts was estimated to be 65 Mha in the world, except for the mountain areas. Biomass production from these sites will be converted annually into 980 Mt methanol with hydrogen from the deserts. This amount is equal to 34% of the world's fuel consumption by vehicles.     

Beneficial effect of carbon–PVA colloid additives for lead–acid batteries

Based on the previous success of adding ultra-fine carbon–PVA (polyvinyl alcohol) colloid solution to restore performance of weak batteries, a large scale test programme of practical batteries including those used in forklift, golf cart, taxi cab, truck and bus applications from 150 companies was carried out. More than 95% of the tested batteries exhibited excellent recovery in performance parameters including the specific gravity (S.G.), voltage and operation time (Ah capacity). The work reported here includes basic research studies to understand better the beneficial action of the carbon–PVA colloid additive.     

Fabrication of optics by use of plasma chemical vaporization machining with a pipe electrode

We figure optical surfaces by plasma chemical vaporization machining (CVM) with a pipe electrode, in which an rf plasma generated at the electrode tip under approximately atmospheric pressure moves over the surfaces. We propose a shaping method in which the movement of plasma on the surfaces can be determined. Flat and aspheric surfaces are successfully figured with the desired peak-to-valley shape accuracy of 0.1 microm. The root-mean-square roughness of the resultant surfaces is at the subnanometer level. These results confirm that the plasma CVM and the shaping method have the capability to fabricate optics with high accuracy.     

Cranial Base Synchondrosis Lacks PTHrP-Expressing Column-Forming Chondrocytes

The cranial base contains a special type of growth plate termed the synchondrosis, which functions as the growth center of the skull. The synchondrosis is composed of bidirectional opposite-facing layers of resting, proliferating, and hypertrophic chondrocytes, and lacks the secondary ossification center. In long bones, the resting zone of the epiphyseal growth plate houses a population of parathyroid hormone-related protein (PTHrP)-expressing chondrocytes that contribute to the formation of columnar chondrocytes. Whether PTHrP⁺ chondrocytes in the synchondrosis possess similar functions remains undefined. Using Pthrp-mCherry knock-in mice, we found that PTHrP⁺ chondrocytes predominantly occupied the lateral wedge-shaped area of the synchondrosis, unlike those in the femoral growth plate that reside in the resting zone within the epiphysis. In vivo cell-lineage analyses using a tamoxifen-inducible Pthrp-creER line revealed that PTHrP⁺ chondrocytes failed to establish columnar chondrocytes in the synchondrosis. Therefore, PTHrP⁺ chondrocytes in the synchondrosis do not possess column-forming capabilities, unlike those in the resting zone of the long bone growth plate. These findings support the importance of the secondary ossification center within the long bone epiphysis in establishing the stem cell niche for PTHrP⁺ chondrocytes, the absence of which may explain the lack of column-forming capabilities of PTHrP⁺ chondrocytes in the cranial base synchondrosis.