Fabrication of oriented ZnO nanopillar self-assemblies and their application for photovoltaic devices

Organic photovoltaic devices based on a blend of poly(3-hexylthiophene) and a fullerene have been studied by inserting oriented zinc oxide nanopillars which were fabricated by a new method at low temperature (343?K). The dependence of the photovoltaic performance on the zinc oxide morphology was investigated, and it is concluded that the oriented zinc oxide nanopillar array plays an important role in collecting photogenerated electrons and acts as a conducting path to the electrode. Insertion of the oriented zinc oxide nanopillars in the photovoltaic cells produced enhanced performance with a power conversion efficiency of 1.22% under AM1.5 illumination.     

Determination of surface selection rule of surface plasmon resonance near-infrared spectroscopy by using a Langmuir-Blodgett film

Near-infrared (NIR) absorption spectra of a cadmium arachidate Langmuir-Blodgett (LB) film were measured by surface plasmon resonance near-infrared spectroscopy (SPR-NIRS) based on the Kretschmann configuration with a 18.8-nm gold film. An NIR spectrum enhanced severalfold was obtained as a top ridge of the SPR-NIR spectra measured at different incident angles by using the principle of absorption-sensitive SPR. In order to determine the surface selection rule of SPR-NIRS, the enhanced NIR absorption spectrum of the LB film was compared to an unenhanced one without the gold film and to a normal incidence transmission spectrum. Moreover, a pair of out-of-plane (OP) and in-plane (IP) spectra were obtained by multiangle infrared spectroscopy analysis from a series of oblique incidence transmission measurements in the NIR region. It became obvious that the salient feature of the enhanced NIR absorption spectrum, i.e., the top ridge of the SPR-NIR spectra is almost equivalent to that of the OP spectrum. On the other hand, the unenhanced spectrum showed IP modes. These experimental results were well explained by calculation of the mean-square electric field based on the Fresnel formula.     

Thermal degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) in nitrogen and oxygen studied by thermogravimetric-Fourier transform infrared spectroscopy

The thermal degradation behavior of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(HB-co-HHx), HHx=12 mol%) has been studied under different environmental conditions by thermogravimetric analysis (TGA) Fourier transform infrared (FT-IR) spectroscopy. It is reported that at higher temperature (>400 degrees C) carbon dioxide and propene are formed from the decomposition product crotonic acid in a nitrogen atmosphere, whereas in an oxygen atmosphere propene oxidizes in a further step to carbon dioxide, carbon monoxide and hydrogen. It was also found that PHB and P(HB-co-HHx) have a similar thermal degradation mechanism. The analysis of the FT-IR-spectroscopic data was performed with 2D and perturbation-correlation moving-window 2D (PCMW2D) correlation spectroscopy.     

Detection of influenza virus hemagglutinin with randomly immobilized anti-hemagglutinin antibody on a carbon nanotube sensor

Carbon nanotube sensors were capable of detecting hemagglutinin binding to anti-hemagglutinin antibody immobilized on the sensor. The carbon nanotube sensors were fabricated by chemical vapor deposition method and it showed field effect transistor property. Anti-hemagglutinin antibody was immobilized by cross-linking on the reverse surface of the carbon nanotube sensor. The current between the source and the drain was measured after incubation of various concentration of hemagglutinin antigen with immobilized anti-hemagglutinin antibody. I-Vgate curve was obtained by plotting the current as a function of the potential applied to the back gate. The I-Vgate curve showed a positive shift in a manner dependent on the hemagglutinin antigen concentration after immobilization of anti-hemagglutinin while no shift was observed without immobilization of anti-hemagglutinin antibody on the surface. The sensitivity of the CNT sensor was higher than that of the QCM method even without controlling the orientation of the anti-hemagglutinin antibody. This method constitutes a new tool to analyze interactions among biomolecules on a substrate.     

The Role of Cytokines Produced via the NLRP3 Inflammasome in Mouse Macrophages Stimulated with Dental Calculus in Osteoclastogenesis

Dental calculus (DC) is a common deposit in periodontitis patients. We have previously shown that DC contains both microbial components and calcium phosphate crystals that induce an osteoclastogenic cytokine IL-1β via the NLRP3 inflammasome in macrophages. In this study, we examined the effects of cytokines produced by mouse macrophages stimulated with DC on osteoclastogenesis. The culture supernatants from wild-type (WT) mouse macrophages stimulated with DC accelerated osteoclastogenesis in RANKL-primed mouse bone marrow macrophages (BMMs), but inhibited osteoclastogenesis in RANKL-primed RAW-D cells. WT, but not NLRP3-deficient, mouse macrophages stimulated with DC produced IL-1β and IL-18 in a dose-dependent manner, indicating the NLRP3 inflammasome-dependent production of IL-1β and IL-18. Both WT and NLRP3-deficient mouse macrophages stimulated with DC produced IL-10, indicating the NLRP3 inflammasome-independent production of IL-10. Recombinant IL-1β accelerated osteoclastogenesis in both RANKL-primed BMMs and RAW-D cells, whereas recombinant IL-18 and IL-10 inhibited osteoclastogenesis. These results indicate that DC induces osteoclastogenic IL-1β in an NLRP3 inflammasome-dependent manner and anti-osteogenic IL-18 and IL-10 dependently and independently of the NLRP3 inflammasome, respectively. DC may promote alveolar bone resorption via IL-1β induction in periodontitis patients, but suppress resorption via IL-18 and IL-10 induction in some circumstances.     

Effect of metallic wire inserted in nozzle in high-speed melt spinning of poly(ethylene terephthalate)

High-speed melt spinning of poly(ethylene terephthalate) was performed using a spinning nozzle with an inserted metallic wire of various lengths (0, 8, 30, and 45 mm). The molecular orientation of as-spun fibers increased with the increase in the wire length at all the take-up velocities examined. Along with the enhanced molecular orientation, the longer wire length led to the starting of orientation-induced crystallization at lower take-up velocities. The structure of crystallized fibers obtained at low speeds can be characterized by high crystallinity and relatively low molecular orientation. From the on-line measurement of the diameter and temperature profiles of the spin line with the 30-mm metallic wire, it was revealed that the spin-line had a maximum diameter of about 6 mm at the wire end. The spin-line temperature at this position was about 190°C. The solidification of the spin-line occurred at positions much closer to the spinneret in comparison with ordinary high-speed spinning. These results show that high-speed spinning with a wire inserted in the nozzle corresponds to a spinning process operated at extremely low extrusion temperature using a nozzle with an extremely large diameter. From the starting of orientation-induced crystallization at lower levels of birefringence in comparison with ordinary high-speed spinning, the alteration of the inherent fiber structure that cannot be represented by birefringence was also suggested. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 665–674, 1998     

Fiber structure formation in ultra-high-speed melt spinning of poly(ethylene 2,6-naphthalene dicarboxylate)

The high-speed melt spinning of poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) was performed up to the take-up velocity of the ultra-high-speed region, 9 km/min. From the investigations of the structure and physical properties of the as-spun fibers, the high-speed spinning of PEN was divided into three regions in terms of the mechanism of fiber structure formation. The first region is the take-up velocity of up to 2.5 km/min and the birefringence of up to 0.08 where only a slight increase in molecular orientation was attained. At the take-up velocity of 2.5–4.5 km/min and the birefringence of 0.08–0.25, although some experimental evidences indicated that the orientation-induced crystallization did not occur, there was an increase in the fiber density which suggested the formation of some ordered structure. At the take-up velocity > 4.5 km/min and birefringence > 0.25, the orientation-induced crystallization occurred. The fibers obtained in this region were characterized by the formation of the crystalline structure dominated by the β form. The presence of the necklike deformation in the spinning line was also confirmed. The solidification temperature of the spinning line analyzed from the diameter profile suggested that the formation of β modification crystals occurred at relatively low crystallization temperatures in comparison with that in an isotropic state. Therefore it was indicated that the presence of elongational stress in the spinning line promoted the formation of the β modification crystals. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 1415–1427, 1997