A durable, shock-resistant electromagnetic optical scanner withpolyimide-based hinges

This paper presents a moving-coil electromagnetic optical scanner with newly developed hinge structure consisting of multilayered polyimide films with aluminum lead wires in between. The main purpose is to obtain a scanner with good durability and shock resistance for practical use. Polyimide has both features, and the aluminum lead wires, connecting the moving-coils and fixed electrode pads, are more reliable, because they are located inside the hinge, where the stress caused by torsional deformation and atmospheric degradation are minimal. An electromagnetic actuator is used to satisfy the following requirements; a millimeter-sized mirror, resonant and galvanometric operation, and scan angle control. Scanner prototypes with two different specifications (i.e., fast scanner and slow scanner) were fabricated and characterized. Driven with a sinusoidal current of ±20 mA, the fast scanner and the slow one vibrated with an optical scan angle (&thetas;_o) of 1° at the resonant frequency (f_r) of 1.7 kHz and &thetas;_o of 60° at f_r of 72 Hz, respectively. Durability was demonstrated with a shock test of 2500 G and a life test of over 13 000 h. By substituting sputtered aluminum driving coil with electroplated copper coil, improved &thetas;_o of 16.8° was obtained at f_r of 2.7 kHz     

Co-continuous monolithic titania prepared by organic polymer monolith as pore template

We achieved preparation of co-continuous titania based monolithic materials using several organic polymer monoliths as pore templates. Firstly, the organic polymer monoliths that had well controlled structures were prepared, and filled the pores of polymer monolith with tetra-n-butyl titanate (titan monomer). The following hydrolysis of the titan monomer resulted in titanium dioxide. The polymer monolith was removed by calcination at elevated temperature. We carefully studied the utility of polymer monolithic template, filling method of the titan monomer, and calcination conditions to realize co-continuous titania monolith. In addition, by the change of domain size (size of a skeleton + size of through a pore) of template, we were able to control domain size of the resulting titania monoliths.     

All-optical timing extraction using an optical tank circuit

An ultrafast all-optical timing extraction method using an optical tank circuit is described, and experimental results at 2 Gb/s are reported. A Fabry-Perot resonator, whose free spectral range is equal to the clock frequency of the incoming optical data stream, is utilized as the optical tank circuit. Its fully passive structure and ultra-high-bit-rate operation (~Tb/s) is possible through decreasing resonator length     

Friction Properties of Carbon Nano-Onions from Experiment and Computer Simulations

The carbon nano-onion can be considered as a new kind of interesting lubricating nanoparticle. Used as lubricant additives, carbon nano-onions lead to a strong reduction of both friction and wear, even at low temperature. To better elucidate the mechanisms by which these processes occur, coupled experimental and computational investigations are carried out. In addition, it is found that lubricious iron oxide nanoparticles are generated in the core of the steel contact through mechanisms that are not yet known. The molecular dynamics simulations of carbon onions placed between sliding diamond-like carbon surfaces at high contact pressure indicate that the lubrication mechanism of the onions is based on a coupled process of rolling and sliding inside the contact area. We conclude that most of carbon onions seem to remain intact under friction processes and do not generate graphitic planes, which is in contrast to the previously determined behavior of MoS₂ fullerenes that are mainly exfoliated inside the contact area and liberate lubricating lamellar sheets of h-MoS₂.     

Individual Traffic Characteristics Queueing Systems with Multiple Poisson and Overflow Inputs

A theoretical method for analyzing overflow problems in queueing systems is presented. An interrupted Poisson process (IPP) approximation of overflow traffic is employed. An overflow stream is replaced by an IPP using the three-moment matching method. For a three-input model, to which one Poisson and two IPP streams are offered simultaneously, explicit and iterative formulas are derived to calculate the mean waiting time, overflow probability, and moments of overflow traffic intensity from the system for each of the three input streams. This three-input model is a general one, and can be used for analyzing complex problems such as multistage overflow models and individual traffic characteristics for a model with more than three inputs. By setting the capacity of the waiting room of the three-input model to 0, this method can cover loss systems. For both queueing and loss systems, several numerical examples of typical traffic models are shown. Comparisons are made between theoretical values and experimental values by computer simulations, and it is demonstrated that the accuracy of the method is excellent.     

Starting method of a superconducting generator in a combined‐cycle power plant

In the combined‐cycle power plant generators are started by using the igniting arrangement up to the ignition rotational speed of the gas turbine. On the other hand, in the case of using the superconducting generator, it is difficult to apply the igniting arrangement used to generate electricity on the combined cycle for the structure as is. We examined the induction motor starting method for the superconducting generator by using the 70‐MW‐class quick‐response excitation superconducting model generator and the VVVF power supply. From the examination, we confirmed the ability to raise the rotational speed from 6 to 360 rpm. Moreover, it was found to be able to start 200‐MW‐class superconducting generators by the induction motor starting method with the analysis. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 160(2): 30– 38, 2007; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20283     

Deposition of BaTiO3 thin films by plasma MOCVD

Barium titanium trioxide (BaTiO₃) thin films were deposited on fused silica or silicon wafer substrate from barium dipivaloylmethanate (II) (Ba(dpm)₂) and titanium tetraisopropoxide (IV) (TTIP) used as precursors in an oxygen microwave plasma. The substrates were dielectrically heated and the substrate temperatures were around 900 K during the film deposition. The deposition was performed for 15 min and the deposits were identified as BaTiO₃ by means of X-ray diffraction, X-ray photoelectron spectroscopy, infrared spectroscopy, and ellipsometry. Oxygen and barium atoms and TiO and CO molecules were identified in the plasma. These species would produce higher deposition rates at lower substrate temperatures than those did in the usual thermal metalorganic chemical vapor deposition (MOCVD). The dielectric constant of the BaTiO₃ thin film that was directly deposited on the silicon wafer substrate was as low as 10¹ order of magnitude. Because the deposit reacted with the substrate and an interdiffusional layer was formed, the platinum layer was coated on the silicon wafer substrate in order to prevent the formation of an interdiffusional layer. The dielectric constant then increased to 10³ order of magnitude.     

Strengthening and hydrogen embrittlement of ultrafine-grained Fe–0.01 mass% C alloy processed by high-pressure torsion

This study was conducted to elucidate the effects of annealing and hydrogenation on the tensile properties of an Fe–0.01 mass% C alloy processed by high-pressure torsion (HPT). By HPT processing, the tensile strength was increased to ∼1500 MPa through grain refinement. Low-temperature annealing further strengthened the HPT-processed specimen because of a simultaneous effect of carbide precipitation and grain refinement. Reduction in the dislocation density and the fraction of low-angle grain boundaries through warm-temperature annealing led to a decrease in hydrogen uptake when the specimens were exposed to high-pressure gaseous hydrogen, and they became less sensitive to hydrogen embrittlement (HE).     

Reactive extraction of diols with phenyl boronic acid and trioctylmethylammonium chloride as coextractants and quantitative structure–property relationship of their extraction behaviors

BACKGROUND: Diols that can be produced biologically have attracted much attention because of the increased cost of producing them chemically. The cost of separating the diols from the broth forms a major part of the total cost of microbial production. Reactive extraction using organoboronate is one promising method for recovering diols from the dilute aqueous solution. RESULTS: A basic investigation of solvent extraction of diols was conducted at 303 K employing phenylboronic acid and trioctylmethylammonium chloride as coextractants in the mixed solvent. Both the tetrahedral boronate anion complex and trigonal boronate neutral complex were extracted. 1,3‐diols and vicinal diols were extracted, but 1,4‐diol was not extracted. Extraction equilibrium constants were correlated with the enthalpies of formation of the complexes, which were calculated by molecular modeling with semi‐empirical molecular orbital calculations considering the solvent effect. CONCLUSION: The complex extraction behaviour of diols with phenylboronic acid and quaternary ammonium salt can be predicted by using the quantitative structure–property relationship (QSPR). Copyright © 2009 Society of Chemical Industry     

Laser‐induced full body cleavage of flat‐panel‐display glass

Abstract— Of the two types of thermal‐stress processes for glass, i.e., surface scribing and full body cleavage, the latter is not presently applied in commercial manufacturing due to the technical difficulties, notwithstanding its various advantages. These difficulties, which were pointed out by Kondratenko and were refered to as size effect, consist of a reduced processing speed in a large glass plate and the positional inaccuracy when cleaving close to edges of a glass plate. The result of the investigation aimed to solve these problems, which can pave the way to the commercial application of full body cleavage in the manufacturing of flat‐panel‐display (FPD) devices, is reported.