Carbon composite microelectrodes fabricated by electrophoretic deposition

Single-walled carbon nanotubes were deposited on one end of the etched carbon fiber electrodes by an electrophoretic method. The carbon nanotube bundles formed a dense network on the carbon fiber surface. The electrochemical properties of the composite carbon electrodes were studied in the buffered neutral solutions. The results in cyclic voltammetry's characteristic indicate that the electrons on the electrodes transfer very fast. Furthermore, the redox reactions of dopamine (DA) on the composite electrodes show good sensitivity. When the DA concentration was 0.02 mM, the peak current in differential pulse technique reached 1.33 microA after performing the background subtraction. In addition, the simultaneous detection of DA and ascorbic acid (AA) showed that the interference effect was not observed. It was suggested that the carbon composite microelectrodes have potential applications as electrochemical sensors inside a single cell.     

Immobilization of amphiphilic dendron on silica particles toward the application to ultrahigh pressure liquid chromatography

Amphiphilic poly(amido amine) (PAMAM) dendrons were immobilized on the surface of silica particles, following the solid phase strategy. PAMAM dendrons were constructed by the repetitive feeding of methyl acrylate and ethylenediamine as the monomers. The peripheral functionalization of amine to long alkyl ends generated the amphiphilic PAMAM dendron on the silica surface. These amphiphilic dendron-modified silica particles were applicable as new packing materials for ultrahigh pressure liquid chromatography.     

A Gate‐Current Model for Advanced MOSFET Technologies Implemented into HiSIM2

A gate leakage current model for advanced MOSFETs has been developed and implemented into the Hiroshima‐university STARC IGFET Model (HiSIM), the first complete surface‐potential‐based model. The model consists of four tunneling mechanisms, the gate to channel/bulk/source/drain, and requires totally 15 model parameters covering all bias conditions. Simulation results reproduce measurement for any device size and temperature without binning. Validity of the model has been tested with circuits that are sensitive to the change of stored charge due to tunneling current. Copyright © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Stabilized zirconia-based sensor utilizing SnO2-based sensing electrode with an integrated Cr2O3 catalyst layer for sensitive and selective detection of hydrogen

A highly selective hydrogen (H₂) sensor has been successfully developed by using an yttria-stabilized zirconia (YSZ)-based mixed-potential-type sensor utilizing SnO₂ (+30 wt.% YSZ) sensing electrode (SE) with an intermediate Al₂O₃ barrier layer which was coated with a catalyst layer of Cr₂O₃. The sensor utilizing SnO₂ (+30 wt.% YSZ)-SE was found to be capable of detecting H₂ and propene (C₃H₆) sensitively at 550 °C. In order to enhance the selectivity towards H₂, a selective C₃H₆ oxidation catalyst was employed to minimize unwanted responses caused by interfering gases. Among the examined metal oxides, Cr₂O₃ facilitated the selective oxidation of C₃H₆. However, the addition or lamination of Cr₂O₃ to SnO₂ (+30 wt.% YSZ)-SE was found to diminish the sensing responses to all examined gases. Therefore, an intermediate layer of Al₂O₃ was sandwiched between the SE layer and the catalyst layer to prevent the penetration of Cr₂O₃ particles into the SE layer. The sensor using SnO₂ (+30 wt.% YSZ)-SE coated with a catalyst layer of Cr₂O₃ as well as an intermediate layer of Al₂O₃ exhibited a sensitive response toward H₂, with only minor responses toward other examined gases at 550 °C under humid conditions (21 vol.% O₂ and 1.35 vol.% H₂O in N₂ balance). A linear relationship was observed between sensitivity and H₂ concentration in the range of 20–800 ppm on a logarithmic scale. The results of sensing performance evaluation and polarization curve measurements indicate that the sensing mechanism is based on the mixed-potential model.     

Synthesis of novel UV-curable difunctional thiourethane methacrylate and studies on organic–inorganic nanocomposite hard coatings for high refractive index plastic lenses

This study relates to the development of ultraviolet (UV)-curable, organic–inorganic nanocomposite hard coatings for plastic lens substrates, especially for polythiourethane (PTU) and polycarbonate (PC). Novel difunctional thiourethane methacrylate (mercaptoethylsulfide-thiourethane methacrylate: coded MES-TUMA and isophorone diisocyanate-mercaptoethylsulfide-thiourethane methacrylate: coded IPDI-MES-TUMA) was synthesized to enhance the adhesive strength for PTU. On the basis of IR, ¹H NMR, electron spray ionisation-mass spectrometry (ESI-MS) analysis and gel permeation chromatography (GPC), the expected structures were confirmed. These difunctional thiourethane methacrylates were easily mixed with multifunctional urethane acrylate, surface-modified ZrO₂–TiO₂ nanoparticles and photoinitiator in coating formulations. The UV-cured organic–inorganic nanocomposites were very useful as hard coatings for high refractive index plastic lenses such as PTU and PC.     

Synthesis and antibacterial activity of quaternary ammonium salt-type antibacterial agents with a phosphate group

Quaternary ammonium salts are frequently used as antibacterial agent that disrupts cell membrane through the binding of their ammonium cations to anionic sites in the outer layer tissue of bacteria. This article describes the synthesis of quaternary ammonium salt-type antibacterial agents with a phosphate group that strongly binds to hydroxyapatite and bromide ion as counterion. Evaluation of the antibacterial activity of the synthesized compounds in terms of minimum inhibitory concentration (MIC test) showed that the compounds exhibit an excellent antibacterial activity on a variety of bacteria including Gram-positive and Gram-negative bacteria, yeast, and fungi.     

Characterization of chitosan/citrate and chitosan/acetate films and applications for wound healing

In this work, we aimed to develop a scaffold of chitosan (CS) with a porous sponge structure for an artificial skin. The scaffolds were prepared from both CS/citric and CS/acetic solutions. In addition, the cast films were also prepared from the same solutions to compare some of their properties. They were characterized using WAXD, FTIR, DSC, tensile measurements, and SEM observation. It was found that CS/acetate had low crystallinity but CS/citrate was in an amorphous state, resulting in a large ductility with rubbery softness. Despite the different morphologies of CS/citrate and CS/acetate scaffolds, both scaffolds exhibited the wound healing effect available for tissue engineering. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Construction of hydrogen fermentation from garbage slurry using the membrane free bioelectrochemical system

The aim of this study was to show the effectiveness of the membrane free bioelectrochemical system (BES) using three electrodes on inhibition of methanogenesis and construction of hydrogen fermentation from the artificial garbage slurry. The electrical redox-potential on the working electrode was adjusted to -1.0V (vs. Ag/AgCl) that has positive effect on methanogenesis. The redox-potential on the counter electrode was measured to be 1.6V. The pH in the effluents was 5.5-6.4. Hydrogen production rate at the cathode side was similar to that at the anode side and much higher than that calculated from current, and reached a maximum of 2445±815 (average±standard deviation) mL?L(-1)?d(-1) at an organic loading rate of 58.7g dichromate chemical oxygen demand per L d(-1). Methane production was negligible throughout the experiment. Acetate and butyrate were the main products of the fermentation using a BES; these offered favorable conditions for hydrogen production. The bacterial community in the bioelectrochemical hydrogen fermentor differed from that in the methanogenic seed sludge and included hitherto unknown species. These results show that high redox-potential on the anodic electrode and acidic pH in the membrane free BES can be utilized for hydrogen fermentation from the artificial garbage slurry by avoiding methanogenesis.     

Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

A Unique Approach to Characterization of Sol‐Gel‐Derived Rare‐Earth‐Doped Oxyfluoride Glass‐Ceramics

Using the sol‐gel route Nd³⁺‐doped oxyfluoride glass‐ceramics were prepared. LiYF₄ and YF₃ crystals were deposited in the glass‐ceramics and their size, distribution, and amount ratio were varied by changing the compositions and heating temperatures. The incorporation of Nd³⁺ ions into both the fluoride crystals was confirmed by the high‐resolution elemental mapping of the glass‐ceramics. The incorporated Nd³⁺ ions showed up and down conversion photoluminescence whose properties were obviously different among the samples. The preliminary site analysis for Nd³⁺ ions was carried out using a unique approach associated with the Prony series approximation. Finally, the approach was found to be useful for the analysis of materials that are structurally complicating.