Lightning occurrence data observed with lightning location systems of electric power companies in Japan: 2009–2013

Nine electric power companies in Japan have been collecting lightning data with lightning location systems. Five years of the lightning data (2009–2013) are summarized and analyzed in this paper. The recent annual number of lightning flashes of which the current is more than 10 kA in Japan is around 1 million. The variations of lightning occurrence characteristics by areas, seasons, and so on, are clarified. Meteorological conditions that may affect lightning occurrence are also discussed. Furthermore, we show that there is a clear correlation between the number of lightning strikes and the outage rate of transmission lines. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Clinical application of single-shot echo-planar diffusion-weighted imaging with compressed SENSE in prostate MRI at 3T: preliminary experience

Magnetic Resonance Materials in Physics, Biology and Medicine - Image quality (IQ) of diffusion-weighted imaging (DWI) with single-shot echo-planar imaging (ssEPI) suffers from low signal-to-noise...     

TEM analysis of high temperature annealed W nanostructure surfaces

Helium plasma irradiation and electron heating experiments were conducted using tungsten in the divertor simulator NAGDIS-II. Helium plasma irradiation to tungsten led to the formation of nanostructures on the surface, while the nanostructures were annihilated after the potential of the specimen was changed to positive for several 10 min so that electrons irradiated the sample without ion irradiation. The specimens were analyzed in detail by transmission electron microscope with the help of focused ion beam technique. It is revealed that the helium nano-bubbles still remained even after the nanostructures were disappeared from the surface. Porosity of the nanostructured tungsten was measured from the TEM images.     

A three-dimensional shape memory alloy microelectrode with clippingstructure for insect neural recording

A microelectrode, with clipping structure for neural recording from a free-moving insect, was designed and fabricated using a shape memory alloy (SMA) thin film. The SMA thin films (titanium nickel; Ti-48 at.%Ni) are deposited by RF magnetron sputtering and patterned by HF-HNO ₃ wet etching. The transformation temperatures of the SMA thin films were measured at 54°C (A*) and 50°C (M*). The SMA microelectrode consists of a “hook” structure (720 μm×480 μm) and two “C”-shape probes (600 μm×70 μm). The electrode impedance is about 5 kΩ at 1 kHz. The desired three-dimensional (3D) shape is given to the electrode by a bonded wire. The clinging force of the electrode to the nerve is enhanced by the 3-D structures. The SMA microelectrode can clip a nerve cord tightly. The damages of the nerve by thermal actuation of the clip are not observed by physiological analysis. The neural activity from a living insect was successfully recorded with this SMA microelectrode     

Effects of the IVa element addition on the composite-processed superconducting Nb3Sn

The effect of the IVa element addition to the niobium core and that of gallium addition to the matrix on the composition, growth rate and superconducting properties of the composite-processed Nb₃Sn have been studied. The IVa elements added to the niobium core enhance the growth rate of Nb₃Sn, and prevent the grain coarsening of Nb₃Sn. A much larger amount of titanium is incorporated into Nb₃Sn than zirconium or hafnium. T_c shows a slight maximum against the IVa element concentration in the niobium core. J_c at high magnetic fields is more significantly increased by titanium addition than zirconium or hafnium additions. The gallium substitution for tin in the matrix is effective for increasing T_c and J_c in high fields, except for the specimen with Nb-Ti alloy core. The simultaneous addition of hafnium and gallium is most effective for the enhancement of J_c in high fields.     

Creation of 3-D tiny statue by 5-axis control ultraprecision machining

The study deals with the creation of a 3-dimensional (3-D) complicated tiny statue by means of a 5-axis control ultraprecision machining center and a pseudo ball end mill of single crystal diamond. In recent years, 3-D microstructures are required to provide components for micromechanism as well as metal molds and dies. Thus, as an example of complicated 3-D microstructures, a Buddha head of 3 mm in size was created, based on the scanned data of an actual statue. A control program developed in the study enables a diamond tool to feed around the head and to move from the top of the head to the neck not only by 4-axis control but also by 5-axis control to prevent the tool and its holder from colliding with a workpiece. As a result, a tiny Buddha head could be created with high surface quality.     

On-chip fabrication of magnetic alginate hydrogel microfibers by multilayered pneumatic microvalves

Alginate hydrogel has widespread applications in tissue engineering, cancer therapy, wound management and drug/cell/growth factor delivery due to its biocompatibility, hydrated environment and desirable viscoelastic properties. However, the lack of controllability is still an obstacle for utilizing it in the fabrication of 3D tissue constructs and accurate targeting in mass delivery. Here, we proposed a new method for achieving magnetic alginate hydrogel microfibers by dispersing magnetic nanoparticles in alginate solution and solidifying the magnetic alginate into hydrogel fiber inside microfluidic devices. The microfluidic devices have multilayered pneumatic microvalves with hemicylindrical channels to fully stop the fluids. In the experiments, the magnetic nanoparticles and the alginate solution were mixed and formed a uniform suspension. No aggregation of magnetic nanoparticles was found, which is crucial for flow control inside microfluidic devices. By regulating the flow rates of different solutions with the microvalves inside the microfluidic device, magnetic hydrogel fibers and nonmagnetic hydrogel fibers were fabricated with controlled sizes. The proposed method for fabricating magnetic hydrogel fiber holds great potential for engineering 3D tissue constructs with complex architectures and active drug release.     

On-Line Unsupervised Outlier Detection Using Finite Mixtures with Discounting Learning Algorithms

Outlier detection is a fundamental issue in data mining, specifically in fraud detection, network intrusion detection, network monitoring, etc. SmartSifter is an outlier detection engine addressing this problem from the viewpoint of statistical learning theory. This paper provides a theoretical basis for SmartSifter and empirically demonstrates its effectiveness. SmartSifter detects outliers in an on-line process through the on-line unsupervised learning of a probabilistic model (using a finite mixture model) of the information source. Each time a datum is input SmartSifter employs an on-line discounting learning algorithm to learn the probabilistic model. A score is given to the datum based on the learned model with a high score indicating a high possibility of being a statistical outlier. The novel features of SmartSifter are: (1) it is adaptive to non-stationary sources of data; (2) a score has a clear statistical/information-theoretic meaning; (3) it is computationally inexpensive; and (4) it can handle both categorical and continuous variables. An experimental application to network intrusion detection shows that SmartSifter was able to identify data with high scores that corresponded to attacks, with low computational costs. Further experimental application has identified a number of meaningful rare cases in actual health insurance pathology data from Australia's Health Insurance Commission.     

Ultra micro glutamate sensor using platinized carbon-fiber electrode and integrated counter electrode

An integrated ultra micro glutamate sensor has been constructed with a 7 μm diameter platinized carbon-fiber disk (PCD) electrode and a platinum thin-film (PTF) counter electrode fabricated on the glass capillary tube. By platinization, the electrode activity of the carbon fiber is improved. In order to obtain a stable response, a pulse potential is applied for hydrogen peroxide measurement. The PTF counter electrode shows good stability and can be used as a substitute for a silver-silver chloride electrode. Since the integrated PCD electrode shows good characteristics as a hydrogen peroxide sensor, glutamate oxidase is immobilized onto the tip of the PCD electrode to construct the ultra micro glutamate sensor. The sensor shows stable response to glutamate and a response time within 12 s. The calibration range for glutamate measurement is 50–800 μM.     

Optically stimulated luminescence in Cu-doped sodium chloride single crystal for a high-quality X-ray imaging sensor

An intense optically stimulated luminescence (OSL) has been observed, for the first time, in X-irradiated copper-doped sodium chloride (NaCl:Cu) single crystals. The intensity of the OSL peak at 353 nm is proportional to the optical density of the F centres that are created by X-ray irradiation. This suggests that NaCl:Cu is useful as a material for a two-dimensional X-ray imaging sensor in computed radiography utilizing the OSL phenomenon. A possible reaction responsible for the 353 nm OSL peak is also proposed, based on the recombination of Cu²⁺ ions with electrons released from the F centres.